User's Manual
BMP44 - User manual010
Chapter 3
Using the BMP40
Module screen
Since the BMP40 is a SourceCon™ module, it can be combined with a variation of supporting main units. The operation
and conguration interface might be different of the unit where installed, however the offered functionality is identical. Some
devices will support control and conguration through a front panel graphical control interface on a display, while others are
also supporting web-control.
This manual describes the control conguration possibilities using front panel control. For applications where more control
possibilities are offered, check the instruction manual of the used main device for more instructions.
Player:
The (player) button gets you to the player mode screen where track information is displayed (if supported by the connected
transmitter) and previous or next audio track selection can be done.
Home:
The (home) button gets you back to the main screen of the device where the BMP40 is installed to.
Settings:
The (settings) button is selected through pressing the rotary selection dial. This button gets you to the settings menu of
the BMP40 where all congurations can be made.
Discoverable for 60s
Bluetooth receiver
Connecting:
The main module screen of the BMP40 indicates the connection
status of the receiver. To avoid audio playback by unauthorized users
in public installations, transmitter and receiver pairing is required when
connecting for the rst time.
When transmitter and receiver haven’t been paired before, the receiver
won’t be discoverable from the transmitting device. For making it
discoverable, press the button. Subsequently, the receiver is
discoverable and allows connection for about 60 seconds from any
transmitting device.
Once connected, the main module screen displays the name of
the connected device and it will become undiscoverable for other
devices.
Once both transmitter and receiver have been paired, the receiver
will remain connectable for that particular transmitter, even when the
connection button hasn’t been pressed. The BMP40 memory
stores up to 8 authorized device ID’s.
Connected to ‘DeviceName’
Bluetooth receiver