User's Manual
BMP44 - User manual04
Introduction
SourceCon™ Bluetooth receiver module
The BMP40 is a professional Bluetooth receiver module featuring SourceCon™ modular technology. This unique technology
guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly
installed, discovered and ready for operation without requiring any additional internal wiring or complex conguration.
The BMP40 receiver offers wireless connection possibilities for audio playback from any Bluetooth compatible portable device
including laptops, smartphones, tablets or any other. A long range transmission distance (up to 30 meters) is possible depending on
the installed environment. Device discovery and pairing protection with a storage up to 8 authorized devices shall prevent playback
from unauthorized users in public area’s.
All media information such as track and artist information can be retrieved from the BMP40 (if supported by the connected device,
more info on P15: technical specications), while playback control is possible from the connected device or remote control.
The antenna input is implemented by an SMA-type (50 Ω) connector on its panel, allowing connection of the included (2 dBi)
antenna while extension is possible in situations where its installed in a closed / shielded cabinet. The balanced stereo line output
is connected through two 3-pin terminal block connections.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modications not expressly approved by the party responsible for
compliance. such modifications could void the user’s authority to operate the equipment. The OEM
integrator is still responsible for testing their end-product for any additional compliance requirements required with this module
installed
IMPORTANT NOTE: In the event that these conditions cannot be met (for example co-location with another transmitter), then the
FCC authorization is no longer considered valid and the FCC ID can not be used on the nal product. In these circumstances,
the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module
in the user’s manual of the end product which integrates this module.The BMP40 module is designed to comply with the FCC
statement. FCC ID is 2AVCN-BMP40. The host system using BMP40, should have label indicated it contain modular’s FCC ID:
2AVCN-BMP40. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s
RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the
operating and installation congurations of transmitter and its antenna(s).