User's Manual
BMP44 - User manual 09
Chapter 2
Overview BMP40
The BMP40 is a SourceCon™ compatible module featuring an (internal) board-edge connector which carries all signals for
getting it connected to any supporting main unit.
All external in & output connections shall be made using the available connectors on the panel.
1) Balanced stereo line output:
The balanced stereo line output is implemented using two 3-pin terminal block connectors. The audio output available on
this connector allows it to be fed to any amplier or pre-amplier.
2) SMA-type antenna connection:
The antenna (input) connection is implemented using an SMA-type (male) connector whereto the supplied antenna should
get connected. Depending of the installation conditions (e.g. when installed in a closed / shielded cabinet), it can be extended
using optional available accessories for optimal reception conditions.