Setup Guide

11
Seng up the VAP (Video Adversing Plaorm)
• OnceatthebluVAPHomePage,
pressCongure.
• Enterallrelevantdetails,ensure
alldetailsarecorrect.
• Note: Please refer to the Asset #
noted earlier.
• Oncecompleted,press
‘CongureDevice’
• Pleasewaitunlvideobegins
playing.
• Note: The video may take a
short while to load and begin
playing.
• Note: If at any stage the screen
freezes, turn the unit o by
pressing the black buon on
the rear of the unit. Wait for the
unit to power down on the 10”
screen. Once the 10” screen has
powered down, press the on/o
buon again and the screen will
power up.