User's Manual

L01 OEM Module
With LoRa, Wi and BLE, the L01 OEM Module is the only
triple bearer MicroPython enabled micro controller on the
market today – the perfect enterprise grade IoT plaorm for
your connected Things. With the latest Espressif chipset the L01
oers a perfect combinaon of power, friendliness and exibility.
Create and connect your things everywhere. Fast.
- Espressif ESP32 chipset
- Dual processor + WiFi radio System on Chip.
- Network processor handles the WiFi connecvity and the IPv6
stack.
- Main processor is enrely free to run the user applicaon.
- An extra ULP-coprocessor that can monitor GPIOs, the ADC
channels and control most of the internal peripherals during
deep-sleep mode while only consuming 25uA.
- Powerful CPU, BLE and state of the art WiFi radio. 1KM Wi
Range
- Can also double up as a Nano LoRa gateway
- MicroPython enabled
- Fits in a standard breadboard (with headers)
- Ultra-low power usage: a fracon compared to other connected
micro controllers
With dozens of ready to use templates and libraries soon to
be available on the Pycom Exchange, developing a new IoT
soluon is now easier and faster.
L01 Features
Use the Pymakr IDE
Super easy code editor to write your Python scripts
Quick Vericaon
For easy and fast debugging use the interacve shell that is
accessible through telnet or one of the serial ports
Easy Upload
Upload your scripts, and any other les you want to the L01 via
the FTP server
Locally or remotely
Reset the L01 (you can do it locally, or remotely via Telnet)
Mechanical
Processing
Hash / encryption
SHA, MD5, DES, AES
WiFi
802.11b/g/n 16mbps
Bluetooth
Low energy and classic
RTC
Running at 32KHz
- 2 x UART, 2 x SPI, I2C, I2S, micro SD card
- Analog channels: 8x12 bit ADCs
- Timers: 4x16 bit with PWM and input capture
- DMA on all peripherals
- GPIO: Up to 24
- Voltage Input: 3.3V regulated
- WiFi: 12mA in acve mode, 5uA in standby
- Lora: 15mA in acve mode, 10uA in standby
Interfaces
Power
Size: 40mm x 16mm x 2.7mm
Security & Certications
- SSL/TLS support
- WPA Enterprise security
- FCC - 2AJMTL01XXX
- CE
Memory
- RAM: 4MB
- Flash Memory: 8MB
- Hardware oang point
acceleraon
- Python mul-threading
- Node range: Up to 40km
- Nano-Gateway: Up to 22km
- Nano-Gateway Capacity: Up to 100 nodes
- Semtech LoRa transceiver SX1272
- LoRaWAN stack
- Class A and C devices
Range Speciction
LoRa Speciction
- 868 MHz (Europe) at +14dBm maximum
- 915 MHz (North and South America, Australia and New
Zealand) at +20dBm maximum
Operating Frequencies
8MB ash memory
LoRa transceiver
ESP32 Dual Core
Microcontroller and
WiFi/Bluetooth 4.2
radio
Operang temperature:
-40 to 85 degrees celsius
Distributed and manufactured by Pycom Ltd.
Registered oce:
High Point, 9 Sydenham Road, Guildford, Surrey GU1 3RX, UK
Copyright © 2017 by Pycom Ltd. All rights reserved. No part of this
document may be reproduced, distributed, or transmied in any form or
by any means, including photocopying, recording, or other electronic or
mechanical methods, without the prior wrien permission of Pycom Ltd,
except in the case of brief quotaons embodied in crical reviews and
certain other noncommercial uses permied by copyright law.
To order contact [e-mail]