CD/MP3 TURNTABLE WITH AM/FM RADIO DOUBLE CASSETTE AND USB/SD ENCODING PTTCSM60 INSTRUCTION MANUAL
LOCATION OF CONTROLS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) 35) 36) DUST COVER LCD DISPLAY RECORD BUTTON SOURCE BUTTON POWER LED INDICATOR FUNCTION SELECTOR 3.
CONNECTION 1. 2. 3. CONNECT THE POWER CORD (35) TO AC OUTLET AND CONNECT THE SPEAKER JACK TO THE SPEAKER TERMINAL (33) LOCATED ON THE REAR SIDE OF UNIT. TURN THE POWER ON/OFF BUTTON (19) CLOCKWISE UNTIL HEAR A “ CLICK “ SOUND & THE POWER LED INDICATOR (5) LIGHT UP. SWITCH THE FUNCTION SELECTOR (6) TO “ TUNER “ FUNCTION. IF THE LCDD DISPLAY (2) LIGHT UP WITH BLUE BACKLIGHT, IT’S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC. LISTENING TO RADIO MANUAL TUNING 1.
SONG TITLE/FOLDER NAME SEARCH FUNCTION (BY REMOTE HANDSET) YOU CAN SEARCH THE TRACK BY THE TITLE/FLODER NAME IN DISC DURING STOP MODE:1. PRESS THE “ FIND “ BUTTON ONCE, THEN PRESS THE “SKIP UP” (OR SKIP DOWN) BUTTON (24,13), YOU CAN SEARCH THE TITLE OF EACH SONG ONE BY ONE UNDER ALPHABET ORDER ON LCD DISPLAY, THEN PRESS THE CD “ PLAY/PAUSE/STOP ” BUTTON (16) TO START THE PLAYBACK OF THE SELECTED TRACK. 2. PRESS AGAIN “ FIND ” BUTTON, THE FOLDER NAME IS BEING DISPLAYED.
CD DISC PROGRAMMING (BY REMOTE CONTROL) UP TO 32 TRACKS CAN BE PROGRAMMED FOR CD OR MP3 FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:1. SET IN CD/USB MODE & STOP THE CD PLAYBACK. 2. PRESS THE “PROGRAM” BUTTON, “ PROG “ WILL APPEAR ON LCD DISPLAY (2). MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. BUTTONS (13). 3. SELECT A DESIRED TRACK BY PRESSING SKIP (24) OR 4. PRESS THE “ PROGRAM ” BUTTON TO STORE THE TRACE INTO MEMORY.
REMARK : DUE TO AUX AND PHONO WERE DESIGNED AT THE SAME POSITION OF THIS SYSTEM. WHEN AUX IN JACK(36) PLUGGED BY 3.5MM STEREO PLUG. THE CHANNEL WILL CHANGE TO AUX AUTOMATICALLY AND TURNTABLE WILL STOP TO ROTATE. PLEASE ENSURE THE AUX IN JACK(36) WITHOUT PLUGGED BY ANYTHING BEFORE PLAYING PHONO. AUX-IN CONNECTION CONNECT THE UNIT TO ANY AUXILIARY DEVICE (I.E. MP3 PLAYER, OR IPOD® (NOT INCLUDED) BY CONNECTING THE AUX IN JACK(36) AT THE REAR CABINET WITH ONE END OF 3.
PRESS THE “ DUBBING “ BUTTON (23) TO “ HI “ POSITION AND THEN FOLLOW THE SAME PROCEDURES AS STIPULATED IN “DUBBING AT NORMAL SPEED”. WHEN DUBBING A PRE-RECORDED CASSETTE TAPE AT HIGH SPEED, A CHATTERING SOUND IS BEING HEARD. TO AVOID THIS, SET THE VOLUME CONTROL TO A MINIMUM LEVEL. DO NO ACTIVE/DE-ACTIVE THE “HI-NOR. DUBBING” BUTTON DURING DUBBING, THIS WILL VARY THE SPEED OF RECORDING AND MAY BE DAMAGE THE CASSETTE TAPE. B. RECORDING FROM RADIO SELECT “ TUNER ” FUNCTION (6).
IV) COPYING OF MP3 FILE IF PUTTING A MP3 DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR SD/MMC CARD IF PRESS THE “ RECORD “ BUTTON (3). THE OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3 FILE BEING READ. REMARK: THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD SLOT ARE BEING OCCUPLIED BY STORAGE MEDIA.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL) THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY FOLLOWING:- A) SINGLE FILE DELETE 1．SELECT AT “ USB “ OR “ SD “ MODE. 2．PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (2) WILL SHOW (DEL ---001) OR SKIP BACKWARD BUTTON TO SELECT THE FILE GOING TO DELETE 3．PRESS SKIP FORWARD 4．PRESS THE “ REC “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP FORWARD OR SKIP BACKWARD TO SELECT “ YES “ OR “ NO “.
E-8 REMOTE CONTROL TRANSMITTER BATTERY INSTALLATION (BATTERY NOT PROVIDED) THE INFRA-RED TRANSMITTER REQUIRES 2 PC AAA SIZE BATTERY FOR OPERATION BUTTON DESCRIPTION 1) FIND IN MP3 PLAYBACK, PRESS TO ACTIVE FILE/FOLDER NAME SEARCH FUNCTION.
