PLTVD5P OWNER’S MANUAL Mobile Video System • Digital Audio Out-Coaxial • DVD Player With TV Tuner • Multi Color TFT Monitor • Multi-subtitle Languages Function • Multi-audio Languages Function • Multi-angle Function • Parental Control • Remote Control
Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. FEATURES Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance.
CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 The Player ......................................................................................................6 Installation .....................................................................................................8 Open/Close the Monitor and Angle Adjustment......
SAFETY INFORMATION Region Management Information Region Management Information: This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player cannot play this disc. CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT.
DISC NOTES Disc formats supported by this player unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
THE PLAYER FRONT VIEW 16 17 18 19 7 11 8 14 6 1 3 12 5 13 9 10 15 4 2 5-INCH MULTI COLOR TFT MONITOR 1. 2 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
THE PLAYER SIDE VIEW 22 20 21 20. This jack is for earphone. You can connect an earphone to the jack to receive sound signal. 21. VOLUME Slide the knob to change the volume of the earphone. 22. Antenna This antenna can receive TV signal. BACK VIEW 29 23 23. 24. 25. 26. 24 25 26 27 28 27. AUDIO/VIDEO OUTPUT 28. Diversity Antenna Input 29.
INSTALLATION 1. Remove the two transport screws Press OPEN button on the back of the unit to eject the screen display from the base at a little angle then turn the monitor upward to display the two screw. And then use the screwdriver to remove the two screws. Remove the transport scerws Open Button 2. Push the monitor back into the monitor base unit until the screen engages with OPEN button. Then attach the brackets on both sides of unit with screws (M4x5), last install the unit with screws (M5x25).
OPEN/CLOSE THE MONITOR AND ANGLE ADJUSTMENT Opening the monitor Press the OPEN button on the back of the unit to eject the screen display from the base at a little angle. Then you can easily turn the monitor upward. OPEN BUTTON Adjusting the angle of the monitor Rotate the monitor counter-clockwise to let the front view of the monitor appear. Then you can also adjust the monitor left and right from the central viewing position at a certain angle range.
ELECTRIC CONNECTION DC 12V INPUT OUTPUT REMOTE AUDIO/VIDEO OUTPUT DIVERSITY ANTENNA INPUT DIVERSITY ANTENNA INPUT YELLOW VIDEO OUT RED AUDIO R OUT WHITE AUDIO L OUT AC/DC ADAPTOR (OPTIONAL) (OPTIONAL) REMOTE CONTROL RECEIVER CIGARETTE LIGHTER 10 DIGITAL AUDIO
REMOTE CONTROL 8 9 4 5 1 2 3 6 7 10 11 12 14 13 15 16 18 17 19 20 21 24 23 22 25 28 29 32 26 27 30 31 11
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. POWER EJECT MUTE SUBTITLE Press POWER to turn the unit ON or OFF. Press to eject the disc. Press to mute the sound. Changing of the SUBTITLE language on multi-subtitle language DVD disc. ANGLE Changing of the view angle on multi-angle DVD disc. DISPLAY Display statistical disc information during playback. MODE Changing between DVD mode, TV mode and AV mode.
REMOTE CONTROL Preparing the Remote Control Loading a DVD/VCD/CD Disc 1. Turn the ignition on the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically. Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented indicated. 3. Close the cover Battery: Two AAA size battery.
BASIC OPERATION Stopping Play - Brief press the (Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback. - Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter. playback, press on the remote control on the front panel. or MUTE Will mute the sound, but the disc continues playing. When you unmute the sound (press MUTE again), a later passage will be playing. Rapid Forward/Rapid Reverse Press & during play.
BASIC OPERATION Disc Search (GOTO) When select one mode, the corresponding indicator will be illuminated. FOR DVD Press GOTO button twice, the screen will display the following message: SPEAKER ON/VOLUME CONTROL KNOB Rotate the SPEAKER ON/VOLUME knob clockwise or counter-clockwise to increase or decrease the volume level of the speakers on the base of the unit. When rotate the knob in the direction of volume decreasing to the end, it will turn off the speakers.
BASIC OPERATION (2) Press DISPLAY for the second time: On-Screen Display Function Press the DISPLAY button during playback to display the contents of the current disc on the screen.
BASIC OPERATION (4) Press DISPLAY for the fourth time: between monaural and stereo sound. MONO LEFT TOTAL REMAIN 00:40:35 MONO RIGHT STEREO MENU Function (For DVD Only) TOTAL TRACK : 14 TRACK : - 01 (5) Press DISPLAY for the fifth time: The message on the screen will be cleared. Press MENU button while the disc is playing and the disc menu will be displayed. You can navigate with the remote control navigation keys and select a feature with the ENTER key.
BASIC OPERATION MP3 Disc Play TV Operation MP3 disc is playing as the format of FOLDER. For example: Press the MODE button on the remote control to switch among DVD mode, TV mode an AV mode. When in TV mode, the function of the buttons served in DVD mode is locked. SMART NAVI ROOT ROOT 0 MP3 MUSIC 1 Searching channels Press MENU button will enter into searching mode. Then press (CH+) button to start searching TV channels and press (CH-) button to stop searching.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL/PS SPEAKER SETUP PIC MODE NORMAL/LB AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player under STOP mode.) MAIN PAGE TV Screen 2. The initial SETUP menu is displayed. 4:3 Video Material Normal 3. Select the preferred item by using the / buttons.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG CAPTIONS CAPTIONS SCR SAVER SCR SAVER MAIN PAGE MAIN PAGE ENGLISH OSD LANG type setup Select the preferred OSD language by using the / buttons. PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture under noise affect.
SETUP --- GENERAL PAGE --- AUDIO SETUP --- AUDIO SETUP --- TV DISPLAY PIC MODE AUDIO OUT ANALOG OP MODE SPDIF/RAW DYNAMIC SPDIF/PCM ANGLE MARK OSD LANG CAPTIONS LPCM OUTPUT SCR SAVER ON OFF MAIN PAGE SCR SAVER setup Select the SCR SAVER output ON/OFF. MAIN PAGE AUDIO OUT This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to SPDIF/PCM mode.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- AUDIO OUT TV TYPE AUTO 6/8 AUDIO NTSC 4/8 SUBTITLE PAL 2/8 DISC MENU OFF PARENTAL OP MODE FULL DYNAMIC LPCM OUTPUT PASSWORD DEFAULTS SMART NAV MAIN PAGE MAIN PAGE Dynamic Range Control Select DRC and adjust the dynamic range of a Dobly Digital encoded program. There are 8 steps between full compression and off compression. TV type setup This player can play discs recorded in either PAL or NTSC format.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE TV TYPE 1G AUDIO AUDIO 2 SUBTITLE ENGLISH SUBTITLE 3 PG DISC MENU FRENCH DISC MENU 4 PG 13 PARENTAL SPANISH PARENTAL 5 PASSWORD CHINESE PASSWORD 6 PG-R DEFAULTS JAPANESE DEFAULTS 7 NC-17 SMART NAV OFF SMART NAV 8 ADULT MAIN PAGE NO_PARENTAL MAIN PAGE SUBTITLE language setup Select the preferred SUBTITLE language by using the cursor buttons.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE TV TYPE AUDIO AUDIO SUBTITLE SUBTITLE DISC MENU DISC MENU PARENTAL PARENTAL PASSWORD PASSWORD DEFAULTS NO MENU SMART NAV SMART NAV WITH MENU MAIN PAGE MAIN PAGE DEFAULTS RESET DEFAULTS Select reset to become factory initial setting. SMART NAV In this item, you can select NO MENU mode or WITH MENU mode.
SPECIFICATIONS Supply Voltage Current Consumption Signal System Discs Played Audio Output Level Audio Signal Output Characteristics : : : : 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 2A Compositive video 1.0Vp-p 75Ω (1) DVD-VIDEO Disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact Disc (CD-DA) 5” (12cm) disc : 600Ω (2 ch 2.
www.pyleaudio.