00 Cover_back_UK.fm 1 ページ 2006年7月12日 水曜日 午後4時16分 DVD RECORDER Operating Instructions DVR-940HX-S DVR-545HX-S DVD RECORDER ® Published by Pioneer Corporation. Copyright © 2006 Pioneer Corporation. All rights reserved. ® PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.
DVR940HX_UK_EN.book 2 ページ 2006年7月12日 水曜日 午後4時5分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
DVR940HX_UK_EN.
DVR940HX_UK_EN.book 4 ページ 2006年7月12日 Contents 水曜日 午後4時5分 05 Using the GUIDE Plus+® electronic program guide The GUIDE Plus+® system. . . . . . . . . . . 44 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . 6 Putting the batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the remote control . . . . . . . . . . . . . . 7 Disc / content format playback compatibility . . . . . . . . . . . . . . . . . . . . . . .
DVR940HX_UK_EN.book 5 ページ 2006年7月12日 09 Playing and recording from a DV camcorder Playing from a DV camcorder . . . . . . . . . 94 Recording from a DV camcorder . . . . . . . 94 DV video setting . . . . . . . . . . . . . . . . . . . 96 About DV . . . . . . . . . . . . . . . . . . . . . . . . . 96 水曜日 午後4時5分 16 The Initial Setup menu Using the Initial Setup menu . . . . . . . . 137 Selecting other languages for language options . . . . . . . . . . . . . . . . . . . . . . . . .
01 Before_You_Start.fm 6 ページ 2006年7月13日 01 木曜日 午後6時19分 Before you start Chapter 1 Before you start What’s in the box Please confirm that the following accessories are in the box when you open it. • • • • • • • • Remote control AA/R6P dry cell batteries x 2 Audio/video cable (red/white/yellow) G-LINK™ cable RF antenna cable x 2 (1.
DVR940HX_UK_EN.book 7 ページ 2006年7月12日 水曜日 午後4時5分 Before you start Using the remote control 01 Disc / content format playback compatibility Please keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor. • Remote controllers for different devices can interfere with each other.
DVR940HX_UK_EN.book 8 ページ 2006年7月12日 01 水曜日 午後4時5分 Before you start DVD/HDD Recording and playback compatibility This recorder can play and record all the currently popular DVD disc types, as well as providing HDD functionality. The table below shows some specific compatibility differences between the different disc types.
DVR940HX_UK_EN.book 9 ページ 2006年7月12日 水曜日 午後4時5分 Before you start Using DVD-R DL/DVD+R DL discs DVD-R DL (Dual-Layer) and DVD+R DL (Double-Layer) discs contain two recordable layers on a single side, giving about 1.8 times the recording capacity of a conventional single-layer disc. This unit can record to both DVD-R DL and DVD+R DL discs. • If you intend to play DVD-R DL (Video mode) or DVD+R DL discs recorded on this unit on other DVD recorders/players, you must finalize them.
01 Before_You_Start.fm 10 ページ 2006年7月13日 01 • Compatible media: CD-ROM, CD-R, CD-RW, USB. • Compatible formats: MPEG-1 Audio Layer 3 (MP3), Windows Media Audio (WMA) • Sampling rates: 32 kHz, 44.
DVR940HX_UK_EN.book 11 ページ 2006年7月12日 水曜日 午後4時5分 Before you start DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. DivX® VOD content DivX In order to play DivX VOD (video on demand) content on this recorder, you first need to register the recorder with your DivX VOD content provider. You do this by generating a DivX VOD registration code, which you submit to your provider. Some DivX VOD content may only be playable a fixed number of times.
DVR940HX_UK_EN.book 12 ページ 2006年7月12日 01 “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems, Inc. DVB The Digital Video Broadcasting Project, or DVB for short, is a set of open standards for digital broadcasting, covering terrestrial, cable and satellite broadcasts. Based around the MPEG-2 coding system, these open standards ensure that compliant systems are able to work together, independent of manufacturer.
DVR940HX_UK_EN.book 13 ページ 2006年7月12日 水曜日 午後4時5分 Before you start • The HDD is very delicate. If used improperly or in an unsuitable environment, it is possible that the HDD will fail after a few years of use. Signs of problems include playback unexpectedly freezing and noticeable block noise (mosaic) in the picture. However, sometimes there will be no warning signs of HDD failure. If the HDD fails, no playback of recorded material will be possible.
DVR940HX_UK_EN.book 14 ページ 2006年7月12日 02 水曜日 午後4時5分 Connecting up Chapter 2 Connecting up Rear panel connections 1 2 3 4 6 5 7 8 9 HDMI OUT COMPONENT VIDEO OUT Y PB PR AC IN OUT IN ANTENNA (DIGITAL) IN CONTROL G-LINK S-VIDEO AV 2 (INPUT 1/DECODER) OUTPUT IN ANTENNA OUT DIGITAL AUDIO OUT INPUT3 AV 1 (RGB) – TV 10 R AUDIO 11 1 AV1(RGB)-TV AV connector Audio/video output SCART-type AV connector for connecting to a TV or other equipment with a SCART connector.
02 Connecting _Up_EU.fm 15 ページ 2006年7月13日 木曜日 午後6時20分 Connecting up 02 13 DIGITAL AUDIO OUT COAXIAL Coaxial digital audio jack for connecting to an AV amplifier/receiver, Dolby Digital/DTS/ MPEG decoder or other equipment with a digital input. Common Interface Front panel connections Different CA modules support different encryption systems. This recorder is designed to work with modules that support the DVB standard. Contact your service provider to obtain the right kind of CA module.
DVR940HX_UK_EN.book 16 ページ 2006年7月12日 02 水曜日 午後4時5分 Connecting up Connecting a TV antenna This recorder has separate built-in TV tuners for terrestrial digital and terrestrial analog TV broadcasts. If you are ready to receive digital broadcasts now, use the longer of the supplied RF antenna cables to connect the output of your antenna to the ANTENNA (DIGITAL) IN connector. Next use the short supplied RF antenna cable and connect it between the ANTENNA (DIGITAL) OUT and ANTENNA IN (RF IN) connectors.
DVR940HX_UK_EN.book 17 ページ 2006年7月12日 水曜日 午後4時5分 Connecting up 02 Easy connections The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other types of connections are explained starting on the following page. Important • These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, if you want to use the supplied audio/video cable, see Using the supplied audio/video cable on page 18.
DVR940HX_UK_EN.book 18 ページ 2006年7月12日 02 水曜日 午後4時5分 Connecting up Using other types of audio/ video output Using the S-video or component video output AUDIO INPUT If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output.
DVR940HX_UK_EN.book 19 ページ 2006年7月12日 水曜日 午後4時5分 Connecting up 02 Connecting to a cable box or satellite receiver SCART AV CONNECTOR If you have a cable box or satellite receiver with a built-in decoder, connect it to this recorder and your TV as shown on the following page.1 If you are using a separate decoder box for your cable/satellite TV, set up following the instructions on the next page.
DVR940HX_UK_EN.book 20 ページ 2006年7月12日 02 Connecting up 4 Plug the supplied G-LINK™ cable to the G-LINK™ jack. This enables you to control the tuner in the external receiver using the GUIDE Plus+® system. Position the IR transmitter end of the G-LINK™ cable so that the IR receiver on your cable/satellite receiver will pick up the control signals (see diagram).
DVR940HX_UK_EN.book 21 ページ 2006年7月12日 水曜日 午後4時5分 Connecting up Connecting an external decoder box (1) 02 SCART AV CONNECTOR If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this page. See the previous page for how to connect the G-LINK™ cable.
DVR940HX_UK_EN.book 22 ページ 2006年7月12日 02 水曜日 午後4時5分 Connecting up Connecting an external decoder box (2) SCART AV CONNECTOR If you only have a decoder, connect it to this recorder and your TV as shown on this page.1 2 TV Using the setup on this page you can: • Record scrambled channels received using the recorder’s built-in analog TV tuner. Important • Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box.
DVR940HX_UK_EN.book 23 ページ 2006年7月12日 水曜日 午後4時5分 Connecting up 02 Connecting to an AV amplifier/receiver VIDEO IN To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital coaxial output. In addition to a digital connection, we recommend also connecting using the stereo analog connection for compatibility with all discs and sources. You’ll probably also want to connect a video output to your AV amplifier/receiver.
DVR940HX_UK_EN.book 24 ページ 2006年7月12日 02 If you have an HDMI or DVI-equipped1 monitor or display2, you can connect it to this recorder using an HDMI cable (not supplied). The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio. 1 Use an HDMI cable to connect the HDMI OUT connector on this recorder to an HDMI connector on an HDMI-compatible monitor.
DVR940HX_UK_EN.book 25 ページ 2006年7月12日 水曜日 午後4時5分 Connecting up About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players and recorders, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification.
DVR940HX_UK_EN.book 26 ページ 2006年7月12日 02 水曜日 午後4時5分 Connecting up Connecting a DV camcorder Important Using the front panel DV IN jack, it is possible to connect a DV camcorder or video deck, or DVD-R/-RW recorder and digitally transfer DV tapes or DVD-R/-RW discs to DVD-R/-RW. JPEG file storage devices Important • This jack is for connection to DV equipment only. It is not compatible with digital satellite receivers or D-VHS video decks. OPEN/CLOSE HDD/DVD HDD1 A.
02 Connecting _Up_EU.fm 27 ページ 2006年7月13日 木曜日 午後6時36分 Connecting up 02 Connecting the optional external HDD (DVR-940HX-S only) • For information on which external HDDs can be used with this recorder, please refer to the Pioneer Web site. (www.pioneer-eur.com) • See also Using the external HDD on page 13. OPEN/CLOSE HDD/DVD HDD1 A.TV STANDBY/ON D.TV DivX HDD2 DVD PLTV HDMI COPY EXT. HDD INPUT 2 USB DV IN S-VIDEO VIDEO HELP A.TV/D.
DVR940HX_UK_EN.book 28 ページ 2006年7月12日 03 水曜日 午後4時5分 Controls and displays Chapter 3 Controls and displays Front panel 1 2 3 4 5 OPEN/CLOSE STANDBY/ON D.TV DivX HDD2 HDMI COPY INPUT 2 USB DV IN S-VIDEO VIDEO 13 1 STANDBY/ON Press to switch the recorder on/into standby. Disc tray 3 A.TV indicator Lights when analog TV is selected. D.TV indicator Lights when digital TV is selected. DivX indicator Lights during DivX playback. (Copy indicator lights during copying.) REC A.
DVR940HX_UK_EN.book 29 ページ 2006年7月12日 Controls and displays 水曜日 午後4時5分 03 11 (STOP REC) Press to stop recording. 12 REC Press to start recording. Press repeatedly to set the recording time in 30 minute blocks. 13 Front panel inputs See Front panel connections on page 15 for more information on these. 14 HELP Press for help on how to use the current GUI screen. 15 A.TV / D.TV Switches between analog TV antenna input and digital TV antenna input. The A.TV and D.TV indicators show which is selected.
DVR940HX_UK_EN.book 30 ページ 2006年7月12日 03 水曜日 午後4時5分 Controls and displays Display 1 2 3 4 L R 8 7 5 SP Lights when the recording mode is set to SP (standard play). 3 Lights during recording; blinks when recording is paused. EP / SEP Lights when the recording mode is set to EP (extended play) or SEP (superextended play). MN Lights when the recording mode is set to MN (manual recording level) mode. 6 Character display (page 142) Indicates which channels of a bilingual broadcast are recorded.
DVR940HX_UK_EN.book 31 ページ 2006年7月12日 水曜日 午後4時5分 Controls and displays 03 Remote control (DVR-940HX-S) (page 87) Press to start reverse or forward scanning. Press again to change the speed. HDD/DVD STANDBY/ON 1 / / (page 88) While paused, press and hold to start slow-motion playback. Press repeatedly to change the playback speed. 12 PREV PAUSE HELP REC 2 STOP NEXT STOP REC INFO PLAY 3 13 14 While paused, press to advance a single frame in either direction.
DVR940HX_UK_EN.book 32 ページ 2006年7月12日 03 7 Colour buttons (RED, GREEN, YELLOW, BLUE) Use when an EPG screen is displayed or when tuned to a data channel of a digital broadcast. The function of each button will be described on-screen, and changes depending on the screen being displayed. 8 PAUSE LIVE TV (page 75) Press to start recording the current TV channel, but with playback paused, effectively pausing the broadcast. 9 AUDIO (page 70, 71, 91, 92) Press to change the audio language or channel.
DVR940HX_UK_EN.book 33 ページ 2006年7月12日 水曜日 午後4時5分 Controls and displays 21 MENU (page 83) Press to display the disc menu if a DVDVideo, finalized DVD-R/-RW or finalized DVD+R/+RW disc is loaded. 03 Remote control (DVR-545HX-S) HDD/DVD STANDBY/ON When in the GUIDE Plus+® system, use to jump directly to the Menu bar. 1 11 PAUSE LIVE TV HOME MENU INFO 2 22 DISPLAY (page 93) Displays/changes the on-screen information displays.
DVR940HX_UK_EN.book 34 ページ 2006年7月12日 03 6 CM BACK (commercial back) Press repeatedly to skip progressively backward through the audio or video playing. / / (page 88) While paused, press and hold to start slow-motion playback. Press repeatedly to change the playback speed. CM SKIP (commercial skip) Press repeatedly to skip progressively forward through the audio or video playing. While paused, press to advance a single frame in either direction.
03 Controls_and_Displays.fm 35 ページ 2006年7月13日 木曜日 午後2時51分 Controls and displays 03 11 HDD/DVD (page 73) Press to select the hard disk (HDD) or DVD for recording and playback. 20 ONE TOUCH COPY (page 110) Press to start One Touch Copy of the currently playing title to DVD or the HDD. 12 INFO While watching D.TV, press to display the information banner. 21 INPUT SELECT (page 78) Press to change the input to use for recording. Press to see additional information for the highlighted item in the EPG.
DVR940HX_UK_EN.book 36 ページ 2006年7月12日 04 水曜日 午後4時5分 Getting started Chapter 4 Getting started Switching on and setting up 4 ENTER When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output. Start the Setup Navigator. k Setting t Line Complete System this setup before you start using your recorder.
DVR940HX_UK_EN.book 37 ページ 2006年7月12日 水曜日 午後4時5分 Getting started 04 • The country setting will apply to both the digital and analog TV tuners. • The clock will also be set automatically here if D.TV channels are found. • If no new channels were found a message appears asking if you want to scan again. Check the aerial connection before selecting Yes. (If you select No, skip to step 8 below.
DVR940HX_UK_EN.book 38 ページ 2006年7月12日 04 水曜日 午後4時5分 Getting started • Manual clock setting If no stations in your area are broadcasting time signals, you can set the clock manually. Use the / buttons to set your time zone. You can set this by selecting a city or a time relative to GMT. 1/2 k Setting Manual Clock Setting Line System Time Zone er Save England London P p Navigator Summer Time Off Press then use the / buttons to select ‘On’ or ‘Off’ for summer time, then press ENTER.
DVR940HX_UK_EN.book 39 ページ 2006年7月12日 水曜日 午後4時5分 Getting started 13 ENTER Press to continue after reading the HDD caution. k Setting In the event of HDD failure, recordings may be lost or normal playback/recording may Line not System be possible. er Save As recordings might be lost in case of a HDD P failure, we recommend to use the HDD only as temporary storage media. p Navigator Please copy recordings you want to keep to recordable DVD. Press ENTER to continue.
DVR940HX_UK_EN.book 40 ページ 2006年7月12日 04 水曜日 午後4時5分 Getting started Setting up the GUIDE Plus+® system GUIDE 1 Display the GUIDE Plus+ setup menu. This section is only applicable if you chose to use the GUIDE Plus+ system as the EPG type in step 10 of the Setup Navigator above. The GUIDE Plus+® system is a free, interactive on-screen television programming guide.
DVR940HX_UK_EN.book 41 ページ 2006年7月12日 水曜日 午後4時5分 Getting started 04 After pressing ENTER: ENTER 3 code. Enter your postal The system uses your postal code to identify which TV listings data is correct for the area in which you live, so it is important that you enter it correctly. 4 If you are using an external receiver (such as a satellite receiver) with the supplied G-LINK cable, complete this step, otherwise jump to step 5 below. • Select your reception method (Terrestrial, Cable or Satellite).
DVR940HX_UK_EN.book 42 ページ 2006年7月12日 04 A If you are not using an external receiver, this recorder will automatically scan all channels for the host channel: • Leave the recorder in standby overnight (do not leave it switched on). B If you are using an external receiver, you need to identify the host channel from the table below: Country/ Region Host channels Austria Eurosport Belgium RTL-TVI TMF will be switched Music off in the near future.
DVR940HX_UK_EN.book 43 ページ 2006年7月12日 水曜日 午後4時5分 Getting started 04 Checking the downloaded data the following day 2 1 GUIDE Display the GUIDE Plus+ screen. You should see a grid filled with channel logos and TV listings information. Use the / buttons to review the list. If you notice that there are channels missing, or that there are channels in the list that you don’t get, go to the Editor screen: • Press repeatedly until the Menu bar is highlighted. • Press until Editor is highlighted.
DVR940HX_UK_EN.book 44 ページ 2006年7月12日 05 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Chapter 5 Using the GUIDE Plus+® electronic program guide This chapter is only applicable if the EPG Type Select setting made in the Setup Navigator (or the Initial Setup menu) is set to GUIDE Plus+. The GUIDE Plus+ system The GUIDE Plus+® system* is a free, interactive on-screen television programming guide.
05 Guide Plus+ EPG_EU.fm 45 ページ 2006年7月13日 木曜日 午後2時53分 Using the GUIDE Plus+® electronic program guide Using the GUIDE Plus+ system GUIDE Plus+ navigation All the various features and areas are colourcoded for ease of navigation. All screens (with the exception of some setup screens) have the following common elements: 3 1 The table below shows a summary of the remote buttons you’ll use to navigate the GUIDE Plus+ system. Key What it does REC Press to set or cancel One Button Recording.
DVR940HX_UK_EN.book 46 ページ 2006年7月12日 05 One-Button-Record Lock / Unlock video window The RED Action button (Record) is visible anytime you can highlight a program title, including from the Grid, after a search, or in your recommendations in the My TV area. When you enter the GUIDE Plus+ system, the channel you were watching remains visible in the video window. The date stamp above the window lets you know the channel, date and time.
DVR940HX_UK_EN.book 47 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Channel mosaic screen The Grid Area You can switch the display style of channels in the Grid Area, Schedule Area or My TV Area from a list to a mosaic of channel icons by pressing the YELLOW Action button. Select the channel icon you want using the cursor buttons, then press ENTER to return to the previous screen on that channel.
DVR940HX_UK_EN.book 48 ページ 2006年7月12日 05 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide The Search Area From the Search Area you can: • • • • • Search by category Search by subcategory Search by keyword Read program synopsis Tune to a program that’s currently showing • Set a program to record • Access Information panels. ENTER 3 Start the search. The search results are shown sorted by time and date.
DVR940HX_UK_EN.book 49 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide When you’re finished, press the GREEN Action button to exit and continue. 4 Start the keyword search. • You can delete or edit keywords using the RED and GREEN Action buttons. • When you have set more than two keywords, an All subcategory automatically appears which allows you to search for all your keywords.
DVR940HX_UK_EN.book 50 ページ 2006年7月12日 05 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide 4 To add a theme to your profile, highlight ‘Themes’ and press the YELLOW Action button. The Schedule Area The Schedule Area is where you can set, see, edit and delete scheduled (timer) recordings. From the Schedule Area you can: • Edit or delete a One-Button-Recording. • Set, edit or delete a VIDEO Plus+ recording. • Set, edit or delete a manual recording.
DVR940HX_UK_EN.book 51 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide 3 Use the cursor and number buttons to edit the recording date, start time, end time and channel. Use the / buttons or the number buttons to edit. Press the GREEN Action button to go to continue, or the RED Action button to go back. 4 Enter a name for the scheduled recording. Use the / / / buttons followed by ENTER to select characters from the onscreen keyboard.
DVR940HX_UK_EN.book 52 ページ 2006年7月12日 05 Select from DVD, HDD1 or HDDr (Auto Replace Recording)2. • Auto Replace Recording is only available as an option with regular daily or weekly recordings. En 午後4時5分 Using the GUIDE Plus+® electronic program guide 8 Press YELLOW Action button (Destination) to select the recording destination. 52 水曜日 9 Press to access the extended recording options: • If you want to record to a particular HDD genre, use the YELLOW Action button (Genre) to select one.
DVR940HX_UK_EN.book 53 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Deleting a scheduled recording Setting a VIDEO Plus+® recording 1 Highlight the left tile of a scheduled recording. 1 2 Press the RED Action button (Delete). The scheduled event is deleted. 05 Select ‘Schedule’ from the Menu bar. 2 Press the RED Action button (VIDEO Plus+). 3 Use the number buttons to enter a VIDEO Plus+ programming number.
DVR940HX_UK_EN.book 54 ページ 2006年7月12日 05 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Setting a manual recording 1 Select ‘Schedule’ from the Menu bar. 6 Use the number buttons to enter a channel number, then press the GREEN Action button (Next) to confirm. D.TV 2 Press the GREEN Action button (Manual). 3 Use the number and / / / buttons to enter the recording date, then press the GREEN Action button (Next).
DVR940HX_UK_EN.book 55 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide About timer recording Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programs can be set to record just once, every day, or every week.
DVR940HX_UK_EN.book 56 ページ 2006年7月12日 05 Extending a timer recording in progress You can extend a timer recording beyond the programmed end time. This can be useful if a broadcast program overruns, for example. Canceling or extending the timer REC 1 Press and hold for three seconds during a timer recording. Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been canceled. REC 2 Press repeatedly to extend recording in 30 minute blocks.
DVR940HX_UK_EN.book 57 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Frequently Asked Questions • Even though the timer is set, the recorder doesn’t start recording! Check that the disc loaded or HDD is recordable, not locked (see Lock Disc on page 130), and that there are fewer than 99/999 titles already on the DVD/HDD. You can also use the Editor Area if new channels become available in your area, or if you change from cable to satellite, say, or move house.
DVR940HX_UK_EN.book 58 ページ 2006年7月12日 05 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Changing the source and program number 1 Select ‘Editor’ from the Menu bar. The Setup Area The Setup Area is where you can set up the GUIDE Plus+ system for your particular region, TV reception conditions, and so on. Making changes to your GUIDE Plus+ setup Name BBC1 BBC2 ITV CH4 CH5 BBC3 ITV2 E4 UKGOL On/Off On On On On On On On Off On Source D. TV D. TV D. TV D. TV D. TV Ext. Rec. 1 D. TV D. TV D.
DVR940HX_UK_EN.book 59 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide Manual Host Channel setup The GUIDE Plus+ system will automatically identify your Host Channel as soon as the recorder is put into standby for the first time. See the table on page 42 for a list of all the European Host Channels. If you know your Host Channel details (source and program number) or if the automatic identification did not provide the expected result, you can identify your Host Channel manually.
DVR940HX_UK_EN.book 60 ページ 2006年7月12日 05 – The external receiver that you use is currently not supported. If, after leaving your external receiver on overnight, and doing the Reception and External Receiver Setup again, it still does not respond, please call Customer Support to report your brand and model. • My external receiver was successfully setup.
DVR940HX_UK_EN.book 61 ページ 2006年7月12日 水曜日 午後4時5分 Using the GUIDE Plus+® electronic program guide • I used the One-Button-Record feature (red Action button) to set a recording, but I recorded the wrong channel. If the channel to be recorded is received via the external receiver first make sure that the external receiver was left switched on. Next, in the Editor Area, make sure that the channel to be recorded is correctly set: Access the Editor Area.
DVR940HX_UK_EN.book 62 ページ 2006年7月12日 06 水曜日 午後4時5分 Using the digital electronic program guide Chapter 6 Using the digital electronic program guide This chapter is only applicable if the EPG Type Select setting made in the Setup Navigator (or the Initial Setup menu) is set to Digital EPG. General Program List D007 The Digital EPG system The Digital EPG shows a table of scheduled digital TV programs and detailed information about individual programs.
DVR940HX_UK_EN.book 63 ページ 2006年7月12日 水曜日 午後4時5分 Using the digital electronic program guide Program information D007 1 Channel number 2 Station name 3 Program title 4 Appear when other programs have been scheduled for the same period 5 Program schedule 6 Program genre Using the Digital EPG Using the Digital EPG you can check the schedule of digital TV programs, view information about desired programs, and/or select programs.
DVR940HX_UK_EN.book 64 ページ 2006年7月12日 06 水曜日 午後4時5分 Using the digital electronic program guide Setting timer programs Other useful EPG functions Using the Digital EPG, it’s easy to set digital TV programs for recording. EPG Jump GUIDE 1 Press to display the Digital EPG screen. 1 Press GREEN when the Digital EPG screen (Program List, Detailed information or Search Result) is displayed. ENTER 2 Select a program.
DVR940HX_UK_EN.book 65 ページ 2006年7月12日 水曜日 午後4時5分 Using the digital electronic program guide 06 EPG Search 1 Press YELLOW when the EPG screen (Program List, Detailed information or Search Result) is displayed. 2 In the ‘Date’ field select a date (within one week) to search in. Date Sun.12.Sep Time 12:00 Genre Select 0/16 • • • • • • Search Cancel 3 In the ‘Time’ field select the time of day (0:00 to 23:00) to search in. 4 In the ‘Genre’ field, select the genre to search for.
DVR940HX_UK_EN.book 66 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording Chapter 7 Recording About DVD recording Important • The table below shows the maximum number of titles recordable per disc and the maximum number of chapters per title: This recorder can record to DVD-R, DVDRW, DVD+R, DVD+RW, DVD-RAM, DVD-R DL and DVD+R DL media. DVD-R and DVD-RW discs can be initialized for Video mode or VR mode recording.
DVR940HX_UK_EN.book 67 ページ 2006年7月12日 水曜日 午後4時5分 Recording • Fingerprints, dirt and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs. • Pioneer takes no responsibility for recording failure due to power cuts, defective discs, or damage to the recorder. • See also Disc / content format playback compatibility on page 7 for detailed disc compatibility information.
DVR940HX_UK_EN.book 68 ページ 2006年7月12日 07 In all except the LPCM mode, sound is recorded in two channel Dolby Digital format (only Dolby Digital 2.0 can be recorded; Dolby Digital 5.1 recording is not possible). When set to LPCM, sound is recorded in high quality, uncompressed Linear PCM format.
DVR940HX_UK_EN.book 69 ページ 2006年7月12日 水曜日 午後4時5分 Recording 07 Using the built-in A.TV and D.TV tuners Switching between A.TV and D.TV tuners A.TV/D.TV • DVR-940HX-S: SHIFT A.TV/D.TV • DVR-545HX-S: + Press to switch between D.TV (digital) and A.TV (analog). Tip • When changing terrestrial digital broadcast channels, channels with a low signal strength may result in a black screen being displayed.
DVR940HX_UK_EN.book 70 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording Displaying a channel banner Changing D.TV audio languages A channel banner shows program titles, start and end times of the current program and other channel information. The information is updated every minute. • INFO • Press to display the channel banner for the current channel. D001 ************ Now ******************** Next ************* Wed.30.
DVR940HX_UK_EN.book 71 ページ 2006年7月12日 水曜日 午後4時5分 Recording 07 Changing A.TV audio channels You can change the audio channel of the broadcast or external input signal. AUDIO • DVR-940HX-S: AUDIO SHIFT • DVR-545HX-S: + Press to change the audio type. The current audio channel is displayed onscreen. • If the NICAM audio setting (see NICAM Select on page 142) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio.
DVR940HX_UK_EN.book 72 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording Setting the picture quality/ recording time DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD Before starting a recording, you will usually want to set the picture quality/recording time. There are six standard settings available, which allow you to choose a balance between picture quality and recording time.
DVR940HX_UK_EN.book 73 ページ 2006年7月12日 水曜日 午後4時5分 Recording 07 Basic recording from the TV • While the recorder is stopped, you can also use the number buttons on the remote to select the channel (For channel 24, press 2, 4 then ENTER). • If the recorder is stopped, you can also use the CH +/– buttons on the front panel to select the channel number.
DVR940HX_UK_EN.book 74 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording REC 7 Start recording. If you want to set a recording end time, press the REC button repeatedly. The recording time increases in 30 minute increments, up to a maximum of six hours. The time the recording will end is shown on-screen and in the front panel display. When the recording ends, the recorder automatically switches into standby if no other operation is being performed. • To cancel the set recording time, press REC.
07 Recording.fm 75 ページ 2006年7月13日 木曜日 午後6時25分 Recording Pause Live TV 07 1 Connect this recorder to your TV with a SCART cable. 2 HDD The Pause Live TV feature lets you effectively pause a TV program you’re watching. When you’re ready to resume watching, just press the PLAY button.
DVR940HX_UK_EN.book 76 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording Using Pause Live TV Tip PAUSE LIVE TV 1 Start recording the current TV channel. Recording continues with playback paused. • Note that it may take up to 10 seconds for recording to start. 2 Press to start playback. You can also use the scan buttons ( / ), pause ( PAUSE) and stop ( STOP)—all without affecting the recording. STOP REC 3 Press to stop the recording. The operation is slightly different depending on the viewing source.
DVR940HX_UK_EN.book 77 ページ 2006年7月12日 水曜日 午後4時5分 Recording Simultaneous recording and playback (Chase Play) 07 Also, during simultaneous recording and playback, if the TV line system of the playback track/title changes then playback will automatically stop. HDD Chase Play allows you to watch a recording that is still in progress from the start, without having to wait until the recording has finished (i.e., playback is ‘chasing’ the recording).
DVR940HX_UK_EN.book 78 ページ 2006年7月12日 07 DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD You can record from an external component, such as a camcorder or VCR, connected to one of the recorder’s external inputs. 1 Make sure that the component you want to record from is connected properly to the DVD recorder. See Chapter 2 (Connecting up) for connection options. INPUT SELECT 2 Press repeatedly to select one of the external inputs to record from.
DVR940HX_UK_EN.book 79 ページ 2006年7月12日 水曜日 午後4時5分 Recording Finalizing a disc DVD (VR) DVD (Video) DVD+R DVD+RW 07 1 Load the disc you want to finalize. Make sure that the recorder is stopped before proceeding. Finalizing ‘fixes’ the recordings on the disc so that it can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.1 2 HOME MENU Select ‘Disc Setup’ from the Home Menu. Note that the disc name will appear in the title menu after you finalize a disc.
DVR940HX_UK_EN.book 80 ページ 2006年7月12日 07 水曜日 午後4時5分 Recording 5 The recorder will now start finalizing the disc. During finalization: • If the finalization process of a DVD-RW or DVD+R/+RW disc is going to take more than around four minutes, you can press ENTER to cancel. Around four minutes before completion, the option to cancel disappears. • You can’t cancel the finalization of a VR mode DVD-R disc.
DVR940HX_UK_EN.book 81 ページ 2006年7月12日 水曜日 午後4時5分 Playback 08 Chapter 8 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the cursor buttons and ENTER. To go back one level from any screen, use the RETURN/EXIT button. Remember also that the button guide at the bottom of every screen shows which buttons do what.
DVR940HX_UK_EN.book 82 ページ 2006年7月12日 08 水曜日 午後4時5分 Playback 3 Start playback. • If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the / / / buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus. • When playing video from the HDD, playback will automatically stop after the end of a title is reached. • There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc.
08 Playback.fm 83 ページ 2006年7月13日 木曜日 午後2時56分 Playback 08 DVR-940HX-S: DVR-940HX-S: Turn the Smart Jog counter-clockwise for backward skip; turn clockwise for forward skip. DVR-545HX-S: DVR-545HX-S with DVD-R/-RW, DVD-RAM only: (Commercial back/skip) Press to skip backward/forward progressively up to a maximum of ten minutes forward or three minutes back. PAUSE CHANNEL + Press to start scanning. Press repeatedly to increase the scanning speed.
08 Playback.fm 84 ページ 2006年7月13日 08 木曜日 午後2時56分 Playback Playing CDs and WMA/MP3 discs Playing Video CD/Super VCDs The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files. The table below shows the basic playback controls for Video CD/Super VCDs. Press to start playback. STOP PAUSE Press to stop playback. Some discs feature Playback Control (PBC for short) menus.
DVR940HX_UK_EN.book 85 ページ 2006年7月12日 水曜日 午後4時5分 Playback CLEAR CLEAR ENTER During playback, enter a track number then press ENTER to skip directly to that track. Press CLEAR to clear a number entry and start again. While a PBC menu screen is displayed, use to select numbered menu items. 08 Playing DivX video files The table below shows the basic playback controls for DivX video files. Press to start playback. If RESUME is displayed onscreen, playback starts from the place last stopped.
DVR940HX_UK_EN.book 86 ページ 2006年7月12日 08 水曜日 午後4時5分 Playback Using the Disc Navigator to browse the contents of a disc Use the Disc Navigator to browse the contents of a disc and start playback. Using the Disc Navigator with recordable discs and the HDD DVD-R DVD-RW DVD+R DVD+RW DVD-RAM HDD You can use the Disc Navigator to browse and edit video on recordable DVDs and the HDD, and to view information on titles. See also Editing on page 97 for more on editing recordable discs.
08 Playback.fm 87 ページ 2006年7月13日 木曜日 午後4時40分 Playback 08 • For discs that contain CD-Audio tracks and WMA/MP3 tracks or DivX titles, you can switch the playback area between CD, WMA/MP3 and DivX. This can only be done while the disc is stopped. ENTER 3 Choose a view option, then press ENTER. The title list display is updated according to the new display preferences. Using the Disc Navigator with playback-only discs Video CD Super VCD WMA/MP3 DivX DVD-Video CD 1 Display the Home Menu.
DVR940HX_UK_EN.book 88 ページ 2006年7月12日 08 水曜日 午後4時5分 Playback Playing in slow motion The Play Mode menu DVD HDD Video CD Super VCD DivX ALL You can play video at various slow motion speeds. DVDs and video on the HDD can be played in slow motion in either direction, while Video CDs/Super VCDs and DivX titles can only be played forwards in slow motion. The Play Mode menu gives you access to search functions, repeat and program play functions. There is no sound when playing in slow motion.
DVR940HX_UK_EN.book 89 ページ 2006年7月12日 水曜日 午後4時5分 Playback 08 Search Mode A-B Repeat ALL DVD HDD The Search Mode feature lets you start playback from a specified point in a disc by time1 or by title/chapter/folder/track number. The A-B Repeat function allows you to specify two points (A and B) within a track or title that form a loop which is played over and over.2 ENTER CD Video CD DivX ENTER 1 Select ‘Search Mode’ from the Play Mode menu, then choose a search option.
DVR940HX_UK_EN.book 90 ページ 2006年7月12日 08 Program ALL There are various repeat play options, depending on the kind of disc loaded, or if you’re using the HDD for playback. It’s also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see Program play below).1 ENTER • Select ‘Repeat’ from the Play Mode menu, then choose a repeat play mode.
DVR940HX_UK_EN.book 91 ページ 2006年7月12日 水曜日 午後4時5分 Playback 08 • To repeat play the program list, select Program Repeat from the Repeat Play Mode menu (see Repeat play on page 90). • Press CLEAR during playback to switch off program play (if no menu OSD, such as the Disc Navigator, is displayed). Press while stopped to erase the program list.
DVR940HX_UK_EN.book 92 ページ 2006年7月12日 08 水曜日 午後4時5分 Playback Switching audio channels DVD (VR) DVD-RAM HDD CD Super VCD 1 Stereo – Soundtrack 1 / Stereo (default) 1 L – Soundtrack 1 / Left channel 1 R – Soundtrack 1 / Right channel 2 Stereo – Soundtrack 2 / Stereo 2 L – Soundtrack 2 / Left channel 2 R – Soundtrack 2 / Right channel Video CD Super VCD WMA/MP3 For HDD1 and VR mode content recorded with bilingual audio, you can switch between left (L) channel, right (R) channel, or both (L+R).
DVR940HX_UK_EN.book 93 ページ 2006年7月12日 水曜日 午後4時5分 Playback 08 Displaying disc information on-screen You can display various on-screen information about the disc loaded or the HDD. Shows recording restrictions for the current channel program Stop DVD-RW VR Original Disc Name Resume XP (1h00m/DVD) Finalized Rem. 0h35m ABC Pr 1 Stereo Copy Once : Comedy shows DVD Mode Indicates copy-protected material DISPLAY • Display/change the on-screen information.
DVR940HX_UK_EN.book 94 ページ 2006年7月12日 09 水曜日 午後4時5分 Playing and recording from a DV camcorder Chapter 9 Playing and recording from a DV camcorder You can play back and record video from a DV camcorder connected to the DV IN jack on the front panel of this recorder. Important • If you connect a second recorder using a DV cable, you cannot control the second unit from this one. • You can’t control this unit remotely from a component connected to the DV IN jack.
DVR940HX_UK_EN.book 95 ページ 2006年7月12日 水曜日 午後4時5分 Playing and recording from a DV camcorder For best results when recording from a DV camcorder to this recorder, we recommend cueing the camcorder to the place you want to start recording from and setting the camcorder to play-pause. 1 Make sure your DV camcorder is connected to the front panel DV IN jack. Also, set the camcorder to VTR mode. ENTER 7 Select ‘Start Rec’. Stop 1.02.
DVR940HX_UK_EN.book 96 ページ 2006年7月12日 09 • I can’t get my DV camcorder to work with the recorder! Check that the DV cable is properly connected. Also make sure that what you’re trying to record is not copyprotected. If it still doesn’t work, try switching off the camcorder then switch back on. • There’s a picture, but no sound! Try switching the DV Input setting (see DV Input on page 143) between Stereo 1 and Stereo 2.
DVR940HX_UK_EN.book 97 ページ 2006年7月12日 水曜日 午後4時5分 Editing 10 Chapter 10 Editing Editing options The table below shows which commands you can use with the HDD and different disc types.
DVR940HX_UK_EN.book 98 ページ 2006年7月12日 10 水曜日 午後4時5分 Editing The Disc Navigator screen • The Disc Navigator screen is where you can edit video content on unfinalized Video mode and VR mode DVD-R/-RW discs, DVD+R/ +RW and DVD-RAM, as well as video content on the hard disk drive. Press to display the command menu panel. Use the / and ENTER buttons to navigate the menus.
DVR940HX_UK_EN.book 99 ページ 2006年7月12日 水曜日 午後4時5分 Editing 10 Editing accuracy Some editing commands ask you whether you want to keep Video mode compatibility or frame accuracy (Video Mode Compatible Editing or Frame Accurate Editing). Frame accurate editing is very precise. The edit point is accurate to the exact frame you choose. However, this accuracy is not preserved in any copy you make if you use the high-speed copy function to make a Video mode DVD.
DVR940HX_UK_EN.book 100 ページ 2006年7月12日 10 水曜日 午後4時5分 Editing Erase Title Name DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD Use this function to erase unwanted titles. You can give titles new names of up to 64 characters long for VR mode, DVD-RAM and HDD recordings, and up to 40 characters for Video mode recordings and DVD+R/+RW discs.
DVR940HX_UK_EN.book 101 ページ 2006年7月12日 水曜日 午後4時5分 Editing • Select CAPS or small to change to upper or lower-case, or use the CASE SELECTION buttons ( PREV/ NEXT). • You can also use the CLEAR button to delete characters directly (press and hold for two seconds to delete the whole name). For other remote control key shortcuts, see Using the remote key shortcuts to input a name below. • For discs formatted on a different DVD recorder, you will see only a limited character set.
DVR940HX_UK_EN.book 102 ページ 2006年7月12日 10 水曜日 午後4時5分 Editing Set Thumbnail HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM You can change the thumbnail picture that appears in the Disc Navigator for a title to any frame that appears in that title. 4 Select ‘Exit’ to return to the Edit screen. Erase Section HDD DVD (VR) DVD-RAM 1 Highlight the title you want to change the thumbnail picture for.
DVR940HX_UK_EN.book 103 ページ 2006年7月12日 水曜日 午後4時5分 Editing 10 4 Highlight ‘From’ then use the playback controls ( , , , , etc.) to find the start of the section to erase, then press ENTER. The bar at the bottom of the screen indicates the current play position in the title. After pressing ENTER, a marker shows the start of the section. 1 Highlight the title you want to divide. ENTER 2 Select ‘Edit’ > ‘Divide’ from the command menu panel. 3 Erase Section (HDD) HDD only: Select the type of edit.
DVR940HX_UK_EN.book 104 ページ 2006年7月12日 10 水曜日 午後4時5分 Editing Chapter Edit DVD (VR) DVD-RAM HDD When editing a VR mode DVD or video on the HDD you can edit individual chapters within a title, with commands for erasing, combining and dividing. 1 Highlight the title that contains the chapters you want to edit. ENTER You can keep dividing the chapter as many times as you wish (up to 999 chapters per DVD-R/-RW/-RAM disc or 99 chapters per HDD title).
DVR940HX_UK_EN.book 105 ページ 2006年7月12日 水曜日 午後4時5分 Editing 10 Set Genre Lock HDD HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM Use this command to assign a genre to a title. Original only 1 Highlight the title you want to assign a genre to. ENTER 2 Select ‘Edit’ > ‘Set Genre’ from the command menu panel.
DVR940HX_UK_EN.book 106 ページ 2006年7月12日 10 水曜日 午後4時5分 Editing Move Combine DVD (VR) DVD-RAM Play List only DVD (VR) DVD-RAM Play List only Use this function to re-arrange the playing order of Play List titles. Use this function to combine two Play List titles into one. 1 to move. 1 Highlight the title you want to combine. This title will remain in the same place after combining with another title. Highlight the title you want ENTER 2 Select ‘Edit’ > ‘Move’ from the command menu panel.
DVR940HX_UK_EN.book 107 ページ 2006年7月12日 水曜日 午後4時5分 Editing 10 ENTER ENTER 4 Select ‘Yes’ to confirm or ‘No’ to cancel. ! OK to combine titles 1 and 3 ? Yes No 3 Input a name for the genre. • The name can be up to 12 characters long. • For information on remote control key short cuts, see Using the remote key shortcuts to input a name on page 101. Genre Name Input Genre Name Free 1 ABC DE F GH I J KLM .
DVR940HX_UK_EN.book 108 ページ 2006年7月12日 10 Frequently asked questions ENTER ENTER 3 Select the command that you want applied to all the marked titles. For example, select Erase to erase all the marked titles. Disc Navigator (HDD) 101 Multi-Mode 3Titles 23:00 FRI 3/12 Erase 23:00 Fri 3/12 Pr 4 SP Lock Unlock 2h00m(1.
DVR940HX_UK_EN.book 109 ページ 2006年7月12日 水曜日 午後4時5分 Copying and backup 11 Chapter 11 Copying and backup Introduction Restrictions on copying Use the copying features of this recorder to: Commercial DVD-Video discs are protected using Copy Guard. These discs cannot be copied to the HDD. • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HDD to play in another player. • Transfer video from a DVD to the HDD for editing.
DVR940HX_UK_EN.book 110 ページ 2006年7月12日 11 One Touch Copy Canceling One Touch Copy * See also Copyright above. You can cancel a One Touch Copy once it’s started. HDD to DVD copies are made in the same recording mode. When copying DVD to HDD, the copy is made in whatever recording mode is currently set. Make sure that a recordable DVD disc is loaded when trying to copy from the HDD. DVR-940HX-S: SHIFT ONE TOUCH COPY • Press and hold for more than a second.
DVR940HX_UK_EN.book 111 ページ 2006年7月12日 水曜日 午後4時5分 Copying and backup • When HDD Recording Format is set to Video Mode Off, titles recorded in LP/ MN9 to MN15 modes cannot be highspeed copied to a Video mode disc. Please use a VR mode DVD-R/-RW or DVD-RAM. • Recordings of bilingual broadcasts cannot be high-speed copied to a Video mode DVD. Please use a VR mode DVDR/-RW or DVD-RAM. • Titles over 8 hours cannot be copied to single-layer DVD+R/+RW discs using One Touch Copy.
DVR940HX_UK_EN.book 112 ページ 2006年7月12日 11 水曜日 午後4時5分 Copying and backup ENTER 3 ENTER Select ‘HDD DVD’. • DVR-940HX-S: If an external HDD is connected, select HDD DVD from the next screen to select the internal HDD to copy from. HDD DVD/CD DVD 5 Add titles to the Copy List (highlight a title and press ENTER to add).
DVR940HX_UK_EN.book 113 ページ 2006年7月12日 水曜日 午後4時5分 Copying and backup 11 6 Press to display the command menu panel.
DVR940HX_UK_EN.book 114 ページ 2006年7月12日 11 水曜日 午後4時5分 Copying and backup ENTER 10 ENTER Select ‘Next’ to proceed. Copy HDD 2 DVD (Video mode) 11 copying. Select ‘Start Copy’ to start Title 1>2>3 Title Edit 1 2 20:00 Wed 20:00 Wed 29/03 Pr 2 22/03 Pr 2 Copy SP SP Back HDD DVD (Video Mode) 1>2>3 Start Copy HDD DVD-RW Video Mode Return Recording Mode Copy Time Next 20:00 Wed29/03 Pr 2 SP 1h00m(2.
DVR940HX_UK_EN.book 115 ページ 2006年7月12日 水曜日 午後4時5分 Copying and backup Copying between internal and external HDDs (DVR-940HX-S) 11 Copying from DVD to (internal) HDD If you have connected an external HDD you can copy between the internal and external HDDs using the high-speed copy feature. Important • The DVD to HDD Copy screen isn’t accessible when a finalized Video mode disc or a DVD-Video is loaded.
DVR940HX_UK_EN.book 116 ページ 2006年7月12日 11 水曜日 午後4時5分 Copying and backup Recording Mode ENTER 4 Add titles to the Copy List (highlight a title and press ENTER to add). Titles you’ve added to the Copy List are highlighted in pink. ENTER 1 Select ‘Recording Mode’ from the command menu panel. ENTER ENTER 5 Select ‘Next’ from the command menu panel to proceed to the title edit screen. 2 Select a recording mode for the copy.
11 Copying.fm 117 ページ 2006年7月13日 木曜日 午後12時11分 Copying and backup Bilingual 1 Select the title containing the audio you want to change. 11 3 Load the disc you want to make a backup of. You can only make backup copies of finalized Video mode discs, finalized DVD+R or DVD+RW discs (excluding DVD-R DL/ DVD+R DL discs). Disc Back-up ENTER 2 Select ‘Bilingual’ from the command menu panel. No disc. Please load a disc to be backed-up. Start Cancel ENTER 3 option.
DVR940HX_UK_EN.book 118 ページ 2006年7月12日 11 6 Select ‘Start’ to start writing the backed-up data to the blank disc. Disc Back-up Write back-up data from Hard Disk Drive. The disc contents will be overwritten. OK to start? Start Cancel • To see the progress of the backup, press DISPLAY. • You can cancel the backup process by pressing ONE TOUCH COPY for more than one second.
DVR940HX_UK_EN.book 119 ページ 2006年7月12日 水曜日 午後4時5分 Using the Jukebox 12 Chapter 12 Using the Jukebox The Jukebox feature allows you to use the recorder’s HDD1 to store and playback music from up to 999 of your CDs. You can also transfer WMA/MP3 files stored on CDR/-RW/-ROM or USB device. Once on the HDD, you can name albums, assign them a genre, and set tracks that you don’t want to play to Jump. Copying music to the HDD The first step is to copy some music to the HDD.
DVR940HX_UK_EN.book 120 ページ 2006年7月12日 12 水曜日 午後4時5分 Using the Jukebox Copying files from a USB device You can copy WMA or MP3 files from a connected USB device, such as a USB drive, to the HDD. 1 Connect the USB device. 2 Menu. HOME MENU Select ‘Jukebox’ from the Home • Listen to Music (WMA/MP3)/Edit – Listen to WMA or MP3 files that have been stored on the HDD. • Listen to Music from USB device – Listen to music from an external USB device. ENTER 3 Select what you want to play.
DVR940HX_UK_EN.book 121 ページ 2006年7月12日 水曜日 午後4時5分 Using the Jukebox 12 Changing the album view Editing Jukebox albums 1 From the album list, display the view options menu panel. A number of commands are available for editing and changing the playback behavior of albums. 1 HOME MENU Select ‘Jukebox’ from the Home Menu. ENTER 2 Select a view option.
DVR940HX_UK_EN.book 122 ページ 2006年7月12日 13 水曜日 午後4時5分 The PhotoViewer Chapter 13 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on the HDD1, recordable DVD or CD-R/-RW/-ROM, or on a USB-equipped digital camera.2 You can also import files and save them to the recorder’s HDD or a DVD-R/-RW disc. Locating JPEG picture files ENTER 3 Select the folder containing the files you want to view, copy or edit.
DVR940HX_UK_EN.book 123 ページ 2006年7月12日 水曜日 午後4時5分 The PhotoViewer Playing a slideshow ENTER 1 Select a folder from the folder list. The first nine images from the selected folder are displayed as thumbnails in the main part of the screen. • The larger the file size, the longer it takes the recorder to load the file. • To start the slideshow from the first file in the folder, skip to step 4 after pressing ENTER. ENTER 2 Select ‘File Selection’ from the menu. The first thumbnail image is highlighted.
DVR940HX_UK_EN.book 124 ページ 2006年7月12日 13 水曜日 午後4時5分 The PhotoViewer Zooming an image During a slideshow you can zoom in to enlarge a portion of the picture by a factor of two or four. You can also move the area of the picture displayed. • To import multiple folders, use the MultiMode; see Selecting multiple files or folders on page 125. ENTER ENTER 1 Press during the slideshow to zoom the picture. Repeated presses cycle between zoom off, 2x zoom and 4x zoom. The zoom factor is displayed on-screen.
DVR940HX_UK_EN.book 125 ページ 2006年7月12日 水曜日 午後4時5分 The PhotoViewer 13 Selecting multiple files or folders The Multi-Mode allows you to select multiple folders/files at once for importing or editing. ENTER 1 Select the folder containing the files you want to import. ENTER 2 menu. Select ‘Multi-Mode’ from the PhotoViewer Folder HDD 1 2 4 5 004. 12/15 FRI 3 File selection New Folder 6 Folder Options Copy to DVD 005. 12/16 SAT 006.
DVR940HX_UK_EN.book 126 ページ 2006年7月12日 13 水曜日 午後4時5分 The PhotoViewer Copying selected files to a DVD-R/-RW ENTER 4 menu. Select ‘Copy to DVD’ from the This feature allows you just to copy some of the files stored on HDD to a DVD. ENTER A slideshow of the files is also recorded on the disc as a Video mode title, making it possible to view the photos on other DVD players/recorders that may not be compatible with JPEG file playback.
DVR940HX_UK_EN.book 127 ページ 2006年7月12日 水曜日 午後4時5分 The PhotoViewer 13 Erasing a file or folder ENTER ENTER 1 Select the file(s) or folder(s) you want to erase. • To erase multiple folders, use the MultiMode; see Selecting multiple files or folders on page 125. • Erasing a folder will erase all the files contained in it. Please be careful! • You can’t erase files that have been locked. • Folders containing locked files can’t be erased. Unlocked files in the folder, however, will be erased.
DVR940HX_UK_EN.book 128 ページ 2006年7月12日 13 水曜日 午後4時5分 The PhotoViewer Locking/Unlocking files ENTER 5 Select ‘Yes’ to confirm, or ‘No’ to cancel. • Copying to the HDD will not work if there is insufficient space on the HDD; if there are already the maximum number of files and/or folders on the HDD. Naming files and folders 2 Select ‘File Options’ or ‘Folder Options’. HDD 004. 12/15 FRI 1 2 4 5 7 8 005. 12/16 SAT 006. 12/17 SUN 007. 12/18 MON 1920 x 1440 Size 002. 12/13 WED 003.
DVR940HX_UK_EN.book 129 ページ 2006年7月12日 水曜日 午後4時5分 The PhotoViewer 13 Printing files Tip Connecting a PictBridge-compatible printer to the USB port will enable you to print out picture files1 stored on the HDD, or directly from a digital camera. Make sure that the printer (and your digital camera if you are using that as a source) is connected to the recorder before starting. ENTER 1 Select the file(s) you want to print.
DVR940HX_UK_EN.book 130 ページ 2006年7月12日 14 水曜日 午後4時5分 The Disc Setup menu Chapter 14 The Disc Setup menu From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu: • See Title Name on page 100 for more on navigating the input screen.
DVR940HX_UK_EN.book 131 ページ 2006年7月12日 水曜日 午後4時5分 The Disc Setup menu 14 Initialize settings Finalize settings DVD-R DVD-RW DVD+RW DVD-RAM Finalize You can initialize a recordable DVD-R/-RW disc for either VR mode or Video mode recording. The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Initial Setup menu (see page 146).
DVR940HX_UK_EN.book 132 ページ 2006年7月12日 14 水曜日 午後4時5分 The Disc Setup menu Optimize HDD Initialize HDD HDD HDD As you record, erase and edit recordings, the HDD file system gradually becomes fragmented. Periodically, the HDD will need optimizing to ‘clean up’ all the fragmented files. When your DVD recorder is working without a problem this option is not visible in the Disc Setup menu. However, if the HDD file system becomes corrupted for some reason, you can initialize the HDD to fix the problem.
DVR940HX_UK_EN.book 133 ページ 2006年7月12日 水曜日 午後4時5分 The Video Adjust menu 15 Chapter 15 The Video Adjust menu Using the Video Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording. Setting the picture quality for TV and external inputs Picture Creation lets you choose a set of picture quality settings for the built-in TV tuner and for each external input.
DVR940HX_UK_EN.book 134 ページ 2006年7月12日 15 水曜日 午後4時5分 The Video Adjust menu • Chroma Level – Adjusts how rich the colours appear. ENTER 3 adjust. Select the setting you want to ENTER Memory1 Prog. Motion Pr 1 Motion PureCinma 3-D Y/C Motion Still YNR Off Max CNR Off Max White Level Max • Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.
DVR940HX_UK_EN.book 135 ページ 2006年7月12日 水曜日 午後4時5分 The Video Adjust menu Setting the picture quality for disc playback This setting determines how the picture will look when playing discs. Choosing a preset 1 HOME MENU With a disc playing (or paused), press to display the Home Menu. 15 Creating your own set There are three user presets in which you can save your own set of picture quality settings for disc playback. 1 Follow Choosing a preset above and select one of the user presets (Memory 1, 2 or 3).
DVR940HX_UK_EN.book 136 ページ 2006年7月12日 15 4 Use the / buttons to adjust the currently selected picture quality setting. 5 When you have all the settings as you want them, press HOME MENU to exit. En 午後4時5分 The Video Adjust menu • CNR – Adjusts the amount of noise reduction (NR) applied to the C (colour) component (only possible when connected using HDMI).
DVR940HX_UK_EN.book 137 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Chapter 16 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu. Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
DVR940HX_UK_EN.book 138 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation HELP Setting On • Switches on the automatic Help screens for GUI displays. Off Switches off the automatic Help screens for GUI displays. (Press HELP on the remote to manually display the Help screen.) GUIDE Plus+ Use the Gemstar GUIDE Plus+ EPG. Digital EPG Use the EPG based on information provided by D.TV broadcasts.
DVR940HX_UK_EN.book 139 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Setting Options Explanation Channel Sort Next Screen Use this screen to sort channel presets into your prefered order. Use the / / / buttons to highlight the channel you want to move, press ENTER. Use the cursor buttons again to highlight the position you want to move the channel preset to, then press ENTER again.
DVR940HX_UK_EN.book 140 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation D.TV Language Next Screen From this screen you can set your Primary and Secondary Audio preference for multilingual digital broadcasts, and your Primary and Secondary Subtitle preference for programs that are broadcast with subtitles. Use the / buttons to highlight a field then use the / buttons to change it.
DVR940HX_UK_EN.book 141 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Setting Options Explanation Channel Swapping Next Screen Proceed to the next screen to swap channel assignments of different presets so that you can group together presets that naturally go together. Select two presets to swap then press ENTER. Next Screen Proceed to the next screen to set the input colour system for the external input and the built-in TV tuner.
DVR940HX_UK_EN.book 142 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation AV2/L1 In Video • Sets the AV2(INPUT 1/DECODER) SCART input to standard composite video. S-Video Sets the AV2(INPUT 1/DECODER) SCART input to Svideo. RGB Sets the AV2(INPUT 1/DECODER) SCART input to RGB. Decoder Use this setting if you connected a decoder to the AV2(INPUT 1/DECODER) SCART connector. For scrambled channels, make sure that the channel Decoder setting is set to On.
DVR940HX_UK_EN.book 143 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Setting Options Explanation DV Input Stereo 1 • Select to use the ‘live’ audio track (recorded during the video shoot) from a camcorder that supports two stereo audio tracks. Stereo 2 Select to use the overdubbed audio track from a camcorder that supports two stereo audio tracks. Mix Select one of the three settings to use a mix of the two stereo audio tracks.
DVR940HX_UK_EN.book 144 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation English • Sets the language of the on-screen displays to English. Language OSD Language available languages Choose from the languages displayed for the onscreen displays. On Screen Display and D.TV Language will both reflect this setting. Audio Language English • Sets the default audio language for DVD-Video playback to English.
DVR940HX_UK_EN.book 145 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Setting Options Explanation DVD Menu Language w/Subtitle Language • Sets the language of DVD-Video menus to the same as that set for the subtitle language. English Sets the language of DVD-Video menus to English. available languages Choose from the displayed languages to set the default language for DVD-Video menus. Other Select to set the DVD menu language to something other than the ones listed.
DVR940HX_UK_EN.book 146 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation Set Thumbnail 0 seconds • Sets the default thumbnail picture in the Disc Navigator to the first frame of the title. 30 seconds Sets the default thumbnail picture to 30 seconds into the title. 3 minutes Sets the default thumbnail picture to 3 minutes into the title. Auto Chapter (Video) No Separation Automatic chapter marking is switched off.
DVR940HX_UK_EN.book 147 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu Setting 16 Options Explanation 4:3 (Letter Box) Select if you have a standard 4:3 TV and prefer the letter box format presentation for widescreen material. 4:3 (Pan & Scan) Select if you have a standard 4:3 TV and prefer the pan and scan presentation for widescreen material. 16:9 • Select if you have a widescreen 16:9 TV. Your TV settings determine how 4:3 material will look.
DVR940HX_UK_EN.book 148 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation HDMI Output (only available when an HDMI device is connected) Screen Resolution 1920 x 1080p Constant 1920 x 1080p output. (DVR-940HX-S only) 1920 x 1080i Constant 1920 x 1080i output. 1280 x 720p Constant 1280 x 720p output. 720 x 576p Constant 720 x 576p output (for use with the 625 input line system). 720 x 480p Constant 720 x 480p output (for use with the 525 input line system).
DVR940HX_UK_EN.book 149 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu 16 Setting Options Explanation Audio Output Auto • Dolby Digital, MPEG and DTS sources are output as a bitstream signal. However, depending on the Audio Out setting, number of audio channels, and the HDMI-connected device, Linear PCM audio may be output. PCM All audio signals are converted to Linear PCM (except DTS). Bitstream Priority Select if the connected device is compatible with bitstream audio.
DVR940HX_UK_EN.book 150 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Setting Options Explanation AV. Link This Recorder Only • Signals received through the AV input when the recorder is in standby are not passed through to the AV output. Pass Through Signals received when in standby are passed though to the output for connected devices. (Note that during EPG data download, the EPG data is not passed through.) When set to Pass Through, make sure to set Power Save (page 137) to Off.
DVR940HX_UK_EN.book 151 ページ 2006年7月12日 水曜日 午後4時5分 The Initial Setup menu About NTSC on PAL TV Depending on the Input Line System setting and the NTSC on PAL TV setting, the signal format output when the recorder is stopped varies as shown in the table below. Input Line System Output NTSC on PAL when TV stopped 625 System Off PAL On PAL Off NTSC On PAL–60 525 System 16 Selecting other languages for language options ENTER 1 Select ‘Other’ from the language list.
DVR940HX_UK_EN.book 152 ページ 2006年7月12日 16 水曜日 午後4時5分 The Initial Setup menu Using Software Update (Digital tuner) The Software Update function can keep the built-in digital tuner up to date with the latest system software. You can either check for updates manually, or have the recorder do it automatically at regular intervals. Access the Software Update screen from the Options menu. There are three options available: Manual Update, Auto Update and Technical Information.
DVR940HX_UK_EN.book 153 ページ 2006年7月12日 水曜日 午後4時5分 Additional information 17 Chapter 17 Additional information Setting up the remote to control your TV (DVR-940HX-S) You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table below. 1 Press and hold down the CLEAR button, then enter the maker code for your TV. See the table on the following page for the list of maker codes.
DVR940HX_UK_EN.book 154 ページ 2006年7月12日 17 水曜日 午後4時5分 Additional information Minimum copying times The table below shows the minimum internal HDD to DVD copying time for one hour of video. Please note that not all discs are compatible with high-speed copying. 1 Check with the disc manufacturer for compatibility. DVD disc type DVD-R / 4x DVD-RW / 4x DVD+R / 4x DVD+RW / 4x DVD-R / 8x / 16x DVD-RW / 6x DVD+R / 8x / 16x DVD+RW / 8x 3x 4x 6x 2 mins. 1.5 mins.*1 1.25 mins.*1 2.5 mins. 2 mins.*1 1.
DVR940HX_UK_EN.book 155 ページ 2006年7月12日 水曜日 午後4時5分 Additional information 17 Manual recording modes The table below shows the approximate recording times for the HDD and the different DVD types in each manual recording mode, as well as the standard recording mode equivalents. Video mode On (HDD) Video mode (DVD), DVD+R/+RW Video mode Off (HDD) VR mode (DVD) Resolution*1 Level 352 x 240 / 352 x 288 352 x 480 / 352 x 576 480 x 480 / 480 x 576 544 x 480 / 544 x 576 720 x 480 / 720 x 576 Rec.
DVR940HX_UK_EN.book 156 ページ 2006年7月12日 17 水曜日 午後4時5分 Additional information • Levels separated by a bold line show where there is a noticeable change in picture quality. • Audio recording in all manual recording modes is in Dolby Digital 2 ch format, except for LPCM mode, which is in Linear PCM format. • When recording to the HDD, recording for the times given will use approximately 4.7 GB of HDD space (equivalent to one recordable DVD). • See also Recording on page 66.
DVR940HX_UK_EN.book 157 ページ 2006年7月12日 水曜日 午後4時5分 Additional information Problem Remedy No picture • Check that everything is connected properly (page 14). • Check that the connected TV and/or the AV amp/receiver is set to the correct input. • The recorder may be set to progressive scan with an incompatible TV. Reset to interlace by pressing and holding the front panel STOP button then pressing ONE TOUCH COPY.
DVR940HX_UK_EN.book 158 ページ 2006年7月12日 17 水曜日 午後4時5分 Additional information Problem Remedy Screen is stretched vertically or horizontally • Make sure that the TV Screen Size setting (page 147) is correct for the kind of TV you have (see also page 165). • If you have a widescreen TV, check its aspect ratio settings. • This recorder’s input switches into wide mode automatically according to the input signal.
DVR940HX_UK_EN.book 159 ページ 2006年7月12日 水曜日 午後4時5分 Additional information Problem Remedy After briefly unplugging or after a power failure the front panel display shows ‘--:--’ • A backup battery inside the recorder keeps the clock and other settings from being reset when there is no power to the recorder. After unplugging or a power failure, the battery keeps all settings for a period of several minutes. Reset the clock and other recorder settings to use the recorder again.
DVR940HX_UK_EN.book 160 ページ 2006年7月12日 17 水曜日 午後4時5分 Additional information HDMI Problem Remedy The connected HDMI or DVI device does not display any picture (and the front panel HDMI indicator does not light) • Try disconnecting then reconnecting the HDMI cable (while the power of both components is on). • Try switching the power of the HDMI/DVI device off then back on. • Try switching off the HDMI/DVI device and this recorder.
DVR940HX_UK_EN.book 161 ページ 2006年7月12日 水曜日 午後4時5分 Additional information 17 On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message Explanation/Action • Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the recorder automatically initializes it. • Incompatible region number.
17 Additional_Information.fm 162 ページ 2006年7月13日 17 162 En 木曜日 午後2時58分 Additional information Message Explanation/Action • Incorrect CPRM information. The recorder could not read the CPRM information. The recorder may be damaged— please consult a Pioneer Service Center. • Repairing disc. • Repairing the HDD. During recording, the power was cut. This display appears when the power is restored. • Could not repair the disc. The recorder was unable to repair the disc after a power cut.
17 Additional_Information.fm 163 ページ 2006年7月13日 木曜日 午後2時58分 Additional information 17 Message Explanation/Action • No DV camcorder connected. The camcorder is not connected properly, or the camcorder is switched off. • You cannot connect more than one DV camcorder at a time. This recorder’s DV jack supports connection to just one camcorder. • Cannot operate the DV camcorder. This recorder cannot operate the DV camcorder. Try switching off the camcorder then turn it back on again.
DVR940HX_UK_EN.
DVR940HX_UK_EN.book 165 ページ 2006年7月12日 水曜日 午後4時5分 Additional information 17 Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The program is shown in widescreen with black bars at the top and bottom of the screen. 4:3 (Pan & Scan) The sides of the program are cropped so that the picture fills the whole screen. 4:3 (Letter Box) 4:3 (Pan & Scan) The program is presented correctly on either setting.
DVR940HX_UK_EN.book 166 ページ 2006年7月12日 17 Handling discs For more detailed care information see the instructions that come with discs. When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge. Do not load more than one disc into the recorder. Should a disc become marked with fingerprints, dust, etc., clean using a soft, dry cloth, wiping the disc lightly from the center to the outside edge.
DVR940HX_UK_EN.book 167 ページ 2006年7月12日 水曜日 午後4時5分 Additional information Condensation Condensation may form inside the recorder if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the recorder, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.
DVR940HX_UK_EN.book 168 ページ 2006年7月12日 17 General Power requirements . . . . . . . . . . . 220–240 V, 50/60 Hz Power consumption DVR-940HX-S . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 W DVR-545HX-S . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 W Power consumption in standby mode . . . . . . . 0.98 W (Front panel display: off) Weight DVR-940HX-S . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 kg DVR-545HX-S . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.
DVR940HX_UK_EN.book 169 ページ 2006年7月12日 水曜日 午後4時5分 Additional information Tuner (digital) Receiving system . . . . . . . . DVB-T (2 K / 8 K COFDM) Tuner VHF/UHF . . . . . . . . . . . . . . . VHF band III (170 MHz to 230 MHz) . . . . . . . . . . . . .UHF band IV, V (470 MHz to 862 MHz) Auto Channel Preset. . . . . . . . . . . 999 ch, Auto Preset, Auto Label, Auto Sort Audio . . . . . . . . . . . . . . . . . . . . .
DVR940HX_UK_EN.
DVR940HX_UK_EN.
00 Cover_back_UK.fm 1 ページ 2006年7月12日 水曜日 午後4時16分 DVD RECORDER Operating Instructions DVR-940HX-S DVR-545HX-S DVD RECORDER ® Published by Pioneer Corporation. Copyright © 2006 Pioneer Corporation. All rights reserved. ® PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.