PDA User Manual

Chapter 5: Configuration
Bluetooth Setup
118 Ikôn Rugged PDA (Windows CE 5.0) User Manual
actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Con-
nection list table shows the connections for scanning as well as the service connections.
5.6.1.6 Properties
The Properties menu displays information about your Ikôn, and provides some port options.
The Device Name field shows the device name of your Ikôn. This name can be changed (see
the Note on the previous page for details).
Device Class shows the Class of Device (e.g. desktop, Ikôn), which is always set
to Handheld.
Local Bluetooth Address shows the address of your Ikôn radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP,
BSP2 to BSP9 are available for activated services (including the server). When COM is
chosen, COM7 to COM9 are available.
Note: You can change the device-name and description of your radio by clicking on the
System icon in Control Panel, which will open the System Properties dialog box.
Click on the Device Name tab to access the menu and change your settings. Then
click on OK.
Although the name will have changed in the Properties menu in Bluetooth Controls,
the radio only reads it on boot-up. For the changes to take effect, you must reset the
Ikôn (for reset instructions, see “Resetting The Ikôn” on page 26).