PDA User Manual

Chapter 5: Configuration
Configuring The Bar Code Decoding Camera Presets
146 Ikôn Rugged PDA (Windows CE 5.0) User Manual
• Predefined presets are marked as read-only.
• Custom presets are marked as read and write.
• One preset—either predefined or custom—is marked as active.
When you have completed all the changes, do one of the following:
•Click OK to exit and save the changes, or
• Click the Close button to exit without saving the changes.
5.13.2.1 Selecting A Camera
If the Ikôn has more than one built-in camera, one camera must be selected for configura-
tion. The cameras is selected as follows:
1. Expand the Camera Presets list to view the camera options.
2. Select a camera.
5.13.2.2 Setting The Active Preset
The active preset is used at startup by the demonstration program and by other application
programs. An application can change the active preset to another preset using Teklogix Im-
agers. To set the active preset, do the following:
1. Select a preset.
2. Click Default.
5.13.2.3 Viewing A Preset
To view the parameter settings in a preset, do the following:
1. Select a preset.
2. Click View.