PDA User Manual

Chapter 5: Configuration
Configuring The Bar Code Decoding Symbology Presets
152 Ikôn Rugged PDA (Windows CE 5.0) User Manual
3. Type the name of the new preset in the dialog box.
4. When you have completed all the changes, do one of the following:
•Click OK to exit and save the changes, or
• Click the Close button to exit without saving the changes.
5. The preset list is displayed; the new custom preset is at the end of the list. It is
marked as read and write.
5.13.3.5 Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a bar code decoding parameter value
do the following:
1. Select a preset.
2. Click Edit.
The following window opens:
3. Expand one of the lists to view the parameter settings.
4. Scroll through the parameter list until you reach the parameter that you want
to change.
5. For a parameter that can take a range of values:
Warning: None of the changes made to a bar code symbology custom preset has any
effect on the symbologies configured by the Teklogix Scanners program in
Control Panel.