PDA User Manual

Chapter 5: Configuration
Manipulating Bar Code Data
154 Ikôn Rugged PDA (Windows CE 5.0) User Manual
The following window opens:
3. Do one of the following:
•Click Yes to delete the custom preset and exit to the preset list, or
•Click No to exit to the preset list without deleting the custom preset.
5.13.3.7 Working With The My Default Preset
The My Default symbology preset is synchronized with the symbologies defined by the
Teklogix Scanners program in Control Panel.
Configuring symbologies in the Teklogix Scanners Control Panel program
When a symbology is enabled or configured using the Teklogix Scanners program, the
changes are also made in the My Default preset. My Default automatically becomes the
active bar code symbology preset.
None of the other bar code decoding predefined presets is changed.
Configuring symbologies in the My Default preset
When My Default is the active preset
In this case the changes to the symbology configuration are also made in the Teklogix
Scanners program.
When My Default is not the active preset
In this case the changes to the symbology configuration are not made in the Teklogix
Scanners program.
5.13.4 Manipulating Bar Code Data
To configure the rules for manipulating bar code data, open the dialog box as follows:
• In Control Panel, select Teklogix Imagers and then click the Filter tab.