PDA User Manual

Chapter 5: Configuration
Configuring Translation Rules
156 Ikôn Rugged PDA (Windows CE 5.0) User Manual
ii. A dialog box —containing the valid range of values for the parameter and the current
setting—similar to the following opens:
iii. Type the new value for the parameter into the box.
3. For a parameter that takes a single character:
i. Select the parameter and then press the [S
PACE] key, or double-click the parameter.
ii. The following dialog box opens:
iii. Press the selected key on the keyboard.
4. When you have completed all the changes, do one of the following:
•Click OK to exit to the Control Panel and save the changes, or
• Click the Close button to exit to the Control Panel without saving the changes.
5.13.5 Configuring Translation Rules
Translation rules enable the automatic processing of bar code data. Up to 10 cases can be de-
fined, each consisting of up to 10 sequential rules.
To configure translation rules open the dialog box as follows:
• In Control Panel, select Teklogix Imagers and then click the Translations tab.
Note: Changes made to the translations configuration using the Teklogix Scanner pro-
gram in Control Panel are synchronized with changes made here. Changes made in
either place affect both translations tables.