PDA User Manual

Chapter 2: Basic Checkout
Summit Client Utility (SCU) For 802.11b/g Radio
14 Ikôn Rugged PDA (Windows CE 5.0) User Manual
2.5.1 Summit Client Utility (SCU) For 802.11b/g Radio
This section describes the Summit Client Utility (SCU). The SCU provides the utilities you
will need to configure the Summit 802.11b/g Compact Flash radio module so that it can
communicate through a wireless LAN effectively and securely.
2.5.2 Assigning The IP Address
Before launching the SCU, you need to configure how the IP address will be obtained. If
your network is not using a DHCP server, you will need to assign an IP address.
1. Tap on Start>Settings>Network and Dial-up Connections.
If you’re using the keyboard, press [ORANGE] [#] to display the Start Menu. Use the
[DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the
sub-menu. Highlight Network, and press [ENTER].
2. Choose the Summit WLAN Adapter icon to open the 802.11b/g Wireless LAN Set-
tings window. In the figure below, this icon is labelled SDCCF10G1.
Figure 2.5 Summit WLAN Adaptor Icon
The Summit WLAN Adapter Settings menu is displayed (In this screen shown as the
SDCCF10G1 menu).