PDA User Manual

Chapter 7: Specifications
Scanner/Imager Specifications
Ikôn Rugged PDA (Windows CE 5.0) User Manual 259
7.4 Scanner/Imager Specifications
7.4.1 SE 955HP Specifications
Max. charge voltage 4.2V +/- 1%
Recommended charge termina-
tion timeout
5.0 hr - charging must stop.
Charge Temperature 0°C to +40°C (32°F to +104°F)
Discharge Temperature -20°C to +50°C (-4°F to +122°F)
Storage Temperature -20°C to +50°C (-4°F to +122 ºF). Storage at elevated tempera-
tures not recommended.
25°C (77 ºF)—recommended storage temperature.
Cycle Life 300 cycles minimum with no degradation below 80% of
nominal capacity based on 1C charge / 1C discharge rates
(to 3.0V) @ 25°C (77 ºF).
Description Specification
Scan Angle 47° ± 3° default / 35° ± 3° reduced
Scan Rate 104 (± 12) scans/sec (bi-directional)
Scan Pattern Linear
Wavelength 650nm
Input Voltage 3.0-5.5 VDC ± 10%
Input Current 65 mA typical
Standby Current 8 µA max
Operating Temperature -20° to 60° C
-4° to 140°F
Print Contrast Minimum 25% absolute dark/light reflectance measured at 650 nm
Dimensions 1.21 cm H x 2.16 cm W x 1.55 cm (max)
0.47 in. H x 0.85 in. W x 0.61 in. D (max)
Symbologies UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5,
Codabar, MSI Plessey