PDA User Manual

B-12 Ikôn Rugged PDA (Windows CE 5.0) User Manual
Appendix B: Wireless Wide Area Network (WWAN)
To o l s Men u
Advanced IP
Figure B.4 Assigning IP Information
The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another
dialog box that allows you to configure a static IP address as well providing DNS and WINS
fields so that you can specify DNS and WINS resolvers.
B.1.4.2 Security Configuration
The Security Configuration dialog box is accessed through the Tools menu. The Security
Configuration dialog box allows you to enable, disable and change the PIN. You will need
the current PIN to make any of these changes. The PIN must be enabled in order to be
changed. (If the PIN is disabled, the New PIN entry field is greyed out.)
The Require PIN on resume checkbox is independent of the aforementioned settings. By de-
fault, this checkbox is unchecked. While this option remains unchecked, any PIN entered on
startup or through the Security Configuration dialog box and submitted successfully to the
modem is stored in memory for as long as the device is not rebooted. This stored PIN is then
used without further user interaction whenever the modem requires a PIN (such as resume
Note: Keep in mind that some network operators do not allow the SIM PIN to be disabled.
A new PIN must consist of 4 to 8 numeric digits.