A Recorders.com Walkthrough Guide 1779 Wells Branch Pkwy #110B Austin, TX 78728 512.251.1302 www.recorders.
Philips Pocket Memo 9600 digital recorder setup guide This instructional guide walks you through the process of creating a Philips DPM9600 digital voice recorder profile within Dragon NaturallySpeaking v9. Illustrated screen shots have been included for your convenience. Preparing the recorder 1. Set the recording mode to HQ* for the best accuracy. 2. Set the microphone to “Dictate”. 3.
Philips Pocket Memo 9600 digital recorder setup guide Please note that if you have a standard microphone speech profile already set up, check the Dragon NaturallySpeaking user manual on ‘Adding a Dictation Source’. You may prefer to add an additional dictation source rather then creating a brand new one. 2. After clicking Next; you will be re-directed to the New User Wizard. This is a 3 step process: 1. Record your speech 2. Transfer your recorded speech to your computer 3.
Philips Pocket Memo 9600 digital recorder setup guide As you can see, there are a number of story options. Choose any one you wish. My favorites are: Dogbert’s Top Secret Management Handbook & Success is a Journey. Transfer your recorded speech to your computer 1. After reading into the recorder, it’s time to transfer your dictation, click . The following dialog box will appear: 2. You’re probably wondering how to get the .
Philips Pocket Memo 9600 digital recorder setup guide 2a. Open the Philips SpeechExec Pro Dictate software. Go to Settings/General Settings. 2b. Once the General settings dialog box opens, Click on Dictation/Automatic Conversion, then click on the Convert automatically when opening a dictation box. Click Apply, then OK, the window will close. You will be brought back to the main screen. 2c. Connect the 9600 DPM to your PC, this can be done via USB cord or the docking station.
Philips Pocket Memo 9600 digital recorder setup guide 2d. Click Finish. You will be redirected to the main page again. Right click on the Finished folder on the left, then go to Folder Properties, left mouse click. 2e. A Folder properties dialog box will appear, copy the path as illustrated below. Let Dragon NaturallySpeaking adapt to your user profile Good news… this is the final step to creating your mobile Philips LFH-9600 profile. 1.
Philips Pocket Memo 9600 digital recorder setup guide This dialog box allows you to listen to your recording. It also displays a Signal to Noise Ratio and whether your audio quality check passed. A Signal to Noise Ratio above 15 is acceptable 2. Click , the window will open. That adapting will take approximately 15-20 minutes. Congratulations, you have successfully completed your portable profile with Dragon NaturallySpeaking v9. © 2007 Recorders.
Philips Pocket Memo 9600 digital recorder setup guide Transcribing Dictations After you have created your Philips profile within Dragon NaturallySpeaking® v9, it’s time to learn how to automate and transcribe your recorder. Philips SpeechExec Pro Dictate v. 4.3 & Dragon NaturallySpeaking® version 9 1. After dictation is complete, connect the Philips LFH-9600 DPM to your PC through the USB cord or the Docking Station. Open the SpeechExec Pro Dictate/Transcribe software. 2.
Philips Pocket Memo 9600 digital recorder setup guide 3. The file will automatically convert to .WAV then ask which Dragon NaturallySpeaking profile to open. 4. The Transcription Options window will open. Essentially this window allows you to chose where the document opens (Example: DragonPad or MS Word), select your preferred settings, then click Transcribe © 2007 Recorders.
Philips Pocket Memo 9600 digital recorder setup guide The application of your choice will automatically launch, and Dragon NaturallySpeaking® will begin transcribing your recorded dictations. Congratulations, you are now ready to continue dictating. Finish © 2007 Recorders.
