Model:P19LCD 16:10 DIGITAL LCD-TV-Monitor 19” LCD TELEVISION OPERATING MANUAL www.pyleaudio.
CONTENTS 1. PREFACE. ...........................................…....................…...............……………. 2 2. SAFETY PRECAUTIONS .................................................................………… 3 3. FRONT, BACK, CONNECTIONS OF LCD ....……………………………... 4 4. TV INSTALLATION GUIDE ............................................…………………... 5 4.1 CONNECTION ANTENNAS ..........………………………………...….. 5 4.2 AV VIDEO INPUT DRAWING ….....……….....….......….….…….…..... 5 4.3 S-VIDEO INPUT DRAWING. ...........
1 PREFACE Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor. Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no install it and contact your dealer. Check that you have all the accessories according to the model. 2 SAFETY PRECAUTIONS Preparation Put the monitor on a stable surface. Do not use the monitor with others fixations than those provided or suggested by the manufacturer. Do not place any material on the monitor.
Heating sources and humidity Keep the monitor dry and away from humidity. Keep the monitor away from heat sources Cleaning and maintenance Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the monitor. Only clean the monitor with a soft and dry cloth. In case of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or other incidents.
3 Front , Back , Connections of LCD Front View Back View and Control Connections 4
TV INSTALLTION DRAWINGS 4.1 CONNECTION ANTENNAS To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.In case of signal of closed circuit TV, 4.2 .VIDEO connection 4.
4.
5 CONFIGURATION OF THE LCD 5.1 PICTURE SETTING Press key until the screen displays as below. a) Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select Picture Mode, Brightness, Contrast, Saturation ,Sharpness and Hue for required adjusting option. b) Press ◄ or ► key to adjust the setting selected. 5.2 AUDIO SETTING Press KEY until the screen displays as below.
5.3 SOURCE SETTING Press key until the screen displays as below. a) Press ► key to access Language –Blue Screen –C.capion—Parent CTRL—Color temp—ONR—Reset menu setting. b) Press ▲ or ▼ key to select exact menu setting. RGB for input source a) Press ▲ or ▼ key to access OSD , select suitable language as you like. b) Press ▲ or ▼ key to access , it will come back to original factory setting.
6 REMOTE CONTROL A.
B. Battery Usage Caution a) Open the cover b) AA size batteries, When inserting the batteries, make sure correct polarities as per”+“and ”-“marks on the batteries and within the battery compartment c) Replace the battery cover To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc) 3.
8 TROUBLESHOOTING AND ADVICE Before calling our SAS centre, please check if you can solve the troubleshooting by yourself. Troubleshooting Control No signal Please check that all cables and cord’s are correctly plugged in. No color shades Adjust the contrast, the color and the brightness Stain show on the screen. May be result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
9. SPECIFICATIONS Screen Size Display Type Resolution(Pixel) Brightness Color Contrast Ratio View Angle(H/V) Aspect Ratio Power Source TV System Video Input Format Antenna Input Audio Output Video S-Video Input PC Audio (Videos-Video-PC) 19 Inch TFT LCD 1440 * 900 300cd/㎡ 24 bit 700 : 1 120/100 16:10 120VAC 60HZ DC12V Adapter ≤50W NTSC NTSC / PAL Standard antenna socket 75 Ω L / R 3W*2 Video 1.0Vp-p 75 Ω; RCA Y:1.0Vp-p±3db C:0.3Vp-p±3db 640*480/60Hz 、 800*600/60Hz 1024*768/60Hz 、 R/L 200mVrms (max3.