Stereo Amplifier User Manual

3 - Pyle Pro PCA4 Manual
FEATURES AND CONTROLS
(1) Blue LED Output Level Display
(2) Power On/Off and LED Indicator
Main power switch, the indicator lights when the amplifier is turned on.
(3) CD/MP3 3.5mm AUX Input Jack (FRONT)
Lets you easily connect the computerized MP3 Device (player) sources, such as
PC (CD ROM), Laptop, Walkman, iPod, and Cell Phone.
(4) MASTER Volume Control
Lets you control the overall volume level.
(5) BASS and TREBLE Controls
Allows you to boost or attenuate bass and treble for the desired sound.
(6) LINE RCA Input
Lets you connect most high level audio sources such as CD player, tape deck,
tuner, camcorder, or VCR. It is compatible with the computerized devices (MP3)
via 3.5mm to RCA Converter.
(7) Push Type Speaker Terminal
Lets you easily connect speaker wires directly to the amplifier. The speaker
impedance can be ranged from 4 to 8 Ohms for the general stereo output.
The total speaker impedance must be at least 4-Ohm per channel at stereo mode.
(8) 110/220 Voltage Selector
This amplifier has selectable input voltage from 110V/60Hz (the standard
in USA and CANADA) to 220V/50Hz (for EUROPEAN operation). Please make
sure the switch is in the proper position before operating, otherwise,
the severe damage will be incurred and not covered by the warranty.
(9) Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit.
If the amplifier suddenly turns off and will not turn on, check the fuse
and if necessary replace it with a 1.5-amp, 250-volt, fast-acting, 5x20mm
fuse (not supplied).