PROFESSIONAL CD PLAYER WITH ANTI-SHOCK MEMORY USER MANUAL PDCD610MU IMPORTANT Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CD Player function : 1. POWER BUTTON Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again. 2. JOG & SHUTTLE WHEELS The controls values functions, as follows : speed control:Rotating the wheel, in play mode, will change the playback speed according.
5. IN BUTTON (LOOP SYSTEM) This button sets the beginning of the loop. The Loop indicator on the display flashes. 6. CONT. / SINGLE BUTTON Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is indicated on the LCD. In SINGLE mode, after each track, the unit pause of begining next track. In continu mode, the unit plays all track and stops. 7.
21. OPEN/CLOSE BUTTON The Disc Is placed on this tray pressing the Disc tray open/close buttons will open or close the trayt. 22. USB PORT Support USB playing and you may also connect the computer with the USB cable but only when enter into USB work mode. 23. CD/USB/SD To enter into the CD and USB or SD work mode by this key conversion. 24. 3 IN 1 CARD SLOT Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot read cards with a capacity of more than 4GB.
WARRANTY CONDITIONS PLYE PRO equipment is covered by a 1-year warranty on parts and labor except for faders (90 days). The following rules apply from the day the equipment leaves the factory: The date on the invoice is considered to be the date the warranty begins. Only companies approved by PLYE PRO are allowed to work on the equipment. Warranty becomes void when other service technicians open the equipment. During warranty period, defective equipment must be sent by pre-paid mail in the original box.