2 Channel USB/ iPod DJ Mixer PDMXi3 PD MX i3 2C ha nn el U SB /iP o dD JM ixe r Owner’s Manual WWW.PYLEAUDIO.
Channel USB/iPod DJ Mixer INPUT SECTION FEATURES 1) THE POWER INDICATION When the power is on, the red light will illuminate. 2) RCA Master Output Use this knob to adjust the volume of master mix output 3) CROSSFADER This fader is used to mix between the two channels. 4) iPod DOCKING STATION Connect any iPod with a bottom connector here. Audio, Video, and the controls are communicated through this port from the iPod to the mixer.
5) THE USB PLAY INDICATION When the USB is connected, the red light will illuminate 6) USB PROT Connect any USB flash drive with mp3 or WMA file. Audio and the controls are communicated through this port from the USB to the mixer. 7) PLAY/PAUSE BUTTON This button plays and pauses music from the iPod or USB flash drive 8) PREVIOUS TRACK Use this switch to re-start the track or to select the last track. 9) NEXT TRACK Use this knob to select the next track.
A 21) LINE SWITCH IPOD 2 This small switch allows you to choose between a iPod 2 input or a AUX level (MP3,CD,Tape player etc...). 22) AUX INPUT When the switch is in the AUX position you may connect any AUX level device as described before(MP3,CD,Tape etc). 23) AUDIO OUTPUT This is a master output, to connect your amplifier or powered speaker by RCA cable included in the gift box. 24) POWER Press the power switch to turn the unit on. To switch the power off. press the power switch again.
FEATURES • 2 Channel : USB port and iPod socket •Next/Previous/play/pause Control • 3 band Equalizer • Gain/Volume control per channel • Master level control • Stereo output 2RCA •AUX input 2RCA •Microphone input with gain, tone control •Headphone jacket •CUE, CUE level control •LED Indicator power and USB play • External power supply •Size:8.26”*8.
