PDWM4400 PDWM4400 VHF WIRELESS SYSTEM VHF WIRELESS SYSTEM OPERATION MANUAL OPERATION MANUAL
A.Overall system Oscillation mode: Carrier Frequency Range: Stability: Max Deviation: Dynamic Range: S/N Ratio: T.H.D: Squelch: Frequency Response: Operating range: Quartz controlled VHF 169-270MHz 0.005% 56KHz with level limiting 100dB 80dB 0.5% "Pilotone & Noise lock" dual squelch circuit 100Hz~15KHz Up to 240 Feet VHF WIRELESS SYSTEM OPERATION MANUAL Thank you for buying the PDWM4400 Wireless System. Please read through these operation instructions so you will know how to operate your model properly.
The on air indicator does not light up PDWM4400 PDWM4400 PDWM4400 PDWM4400 No sound The sound is distorted PDWM4400 VHF PROFESSIONAL FOUR CHANNEL WIRELESS MICROPHONE SYSTEM VOLUME VOLUME RF CHANNEL 1 POWER AF LEVEL VOLUME RF CHANNEL 2 AF LEVEL VOLUME RF CHANNEL 3 AF LEVEL RF The wireless microphone is not turned on. The microphone receiver is not turned on. Turn on the microphone receiver and the connected audio equipment The microphone receiver is not connected properly.
BELT CLIP BATTERY COVER AUDIO OUTPUT JACK VOLUME SWITCH Installation Location: At least 3 ft. above ground level At Least 3 ft. away from wall LOW BAT ON MUTE MIC/LINE MIC LINE MIC LINE MIC LINE MIC LINE POWER SWITCH AUDIO SWITCH 9V + Using the supplied audio cable, connect from the MIXED jack socket to the "MIC IN" / "LINE IN" socket on amplifier. Alternatively, you can connect an optional XLR cable from the "XLR MIXED" socket on the receiver to a professional mixer.
FRONT PANEL REAR PANEL 3 3 4 1 5 6 7 8 9 10 11 RF AF LEVEL PDWM4400 VHF PROFESSIONAL FOUR CHANNEL WIRELESS MICROPHONE SYSTEM VOLUME VOLUME RF AF LEVEL VOLUME RF CHANNEL 1 AF LEVEL CHANNEL 2 XLR MIXED VOLUME RF AF LEVEL CHANNEL 3 CHANNEL 4 17 POWER 16 2 12 1. Power Indicator 2. Power Switch 3. Antenna 4. CH-1 RF Signal Indicator 5. CH-1 AF Indicator 6. CH-2 RF Signal Indicator 13 7. CH-2 AF Indicator 8. CH-3 RF Signal Indicator 9. CH-3 AF Indicator 10.
