Specifications

64
Figure 51 - LCD serial pin layout
Permission Pending
The figure above has the pin layout for the LCD display. As you can see in the picture
the data bus lines are pin 7 through 14. These are the pins we are going to use the
send the data to the LCD screen. Pins 1 and 2 are used for powering up the LCD
screen, they are ground and Vcc respectably. The other pins that are associated with
this device are settings and features we will try to incorporate in our design. Some of the
pins need special values on their lines because they are used as option pins or have
more than one setting that it can be set to.
Figure 52 - Serial LCD Graphical Display
Permission Pending