Thank you for choosing the GPS Navigation Software. This software uses GPS satellites for route navigation and creation. The user guide for In-car navigation should be read thoroughly and kept as reference for future troubleshooting and assistance. Here, you will find detailed and instructional descriptions of use and allow you to enjoy optimum performance and vehicle navigation. The GPS antenna connects to your receiver and provides estimation values based on satellite transmission.
GPS Antenna Install the GPS antenna more than 19.7in away from the main unit and all other electronic devices. Close proximity of GPS antenna to electronic devices may cause impaired reception. To improve GPS reception, install the GPS antenna horizontally on a flat plane. Do not wax or paint the cover of the antenna. Install the GPS antenna at least 3.9'' away from the windshield. Wipe the dirt from the mounting surface before installing the GPS antenna.
We've designed a truly customizable navigation assistance program that adds convenience along with configurable features to help get you where you need to go! Choose settings and options most familiar to your personal preferences as you will need complete control and comfort while on the road.
Getting Started - Initial Setup Select the navigation icon to startup the software. After allowing the screen to load, the initial setup should allow you to choose your device program language. Multilanguage support allows you to choose a suitable language for navigation assistance display screens. The system will then prompt you to accept 'log collection' of input data. Zero personal data will be tracked and this will solely be used for a better navigation assistance experience when using the software.
Main Screen Interface The main screen GPS Navigation interface display appears after you have input personal preference settings. From this screen, you can begin GPS Navigation assistance by pressing Destination and entering the address of your location. Navigation Menu A Power Connection B Time Display C GPS Signal Strength D GPS Navigation Display E Destination F Route Options G More... (Options & Settings) H Power (Standby) I System Settings A: Battery icon appears when the unit is connected to power.
System Settings Pressing 'I' or the settings icon takes you to the system's GPS navigation settings. Pressing the arrows to the right of the screen will allow you to scroll through settings. Sound and Warnings Customize Quick Menu Driving Time Management Traffic Route Settings User Profile Map Settings Volume, Voice Settings, Speed Warning Settings, Alert Point Settings, Warning Sign Alerts, Advanced Settings: Announce Distance of Next Maneuver.
Visual Guidance Settings Data Fields Offer Freeway Services Additional Visual Guidance Settings Display Settings FM Transmitter Regional (Settings) Trip Monitor Log Collection Start Configuration Wizard Reset to Default Choose what is displayed on your GPS Navigation Display Screen.
Destination The GPS software features multiple methods to get you to where you want to go. Find Address Travel to your destination by typing in the address Find Places Travel to your destination by areas of interest Travel to your destination by physically pointing to a particular location on the GPS Navigation Display, which will be indicated by a red arrow icon. Use your finger, or the Find on Map included stylus pen, to swipe across the screen to browse the map.
Route Options... Edit Route Ability to delete your current route or add an additional destination route Displays detailed route information including fuel consumption. Press 'more' Overview to view route alternatives, itinerary, route settings, simulate 'drive-through' navigation, save route and historical traffic. Cancel Route Stop navigating to the selected route *Due to real-time GPS satellite mirroring, this feature does not function.
GPS Navigation Main Display Once you choose a GPS navigation location, the system will search for a GPS signal and automatically begin to calculate the best route to the destination - according to the selected configurable options chosen in the previous settings screens. The circle icon to the top right of the screen display the user-defined 'Customize Quick Menu' short keys. The user will have quick access to the pre-defined GPS Navigation options.
Input Destination After entering the desired GPS location to travel to, the software will then prompt you choose the selected route as a New Route, Waypoint or Final Destination. Once choosing the location destination type, the software will then go on and calculate navigation directions displaying the Route Planning screen. Please allow the unit some time to load the satellite signal and retrieve mapping directions. 11.
Route Calculation As your route calculates directions to the destination, route information will be displayed on the GPS Navigation interface. You can choose to wait for the count-down timer on the bottom right of the screen or you can press 'Go'. Once your route is ready to be traveled, and after loading, you will immediately see turn guidance and hear turn-by-turn voice navigation; if selected within the settings menu.
Pressing on the icon in the bottom middle of the page, which displays your current GPS location, unlocks further GPS Navigation route information. The software enables you to see detailed information of your current location along with the address. Pressing Help Nearby will give you access to located, if any, areas of interested located close to your current destination. The Back button always reverts you to the previous screen.
