PLCD46 INSTRUCTION MANUAL EJECT OPEN Detachable Front Panel CAR Radio & CD Player + + FLAT CLASS ROCK POP LOC TRACK LOUD MUTE DISC RPT RDM CH INT CDP BND SEL DSP C O M PA C T - - D I G I TA L A U D I O POWER MUTE CLK M1/TOP M2/RPT M3/INT M4/RDM M5 M6 LOC APS LUD 160WATTS ANTI-THEFT DETACHABLE SYSTEM AUTO-LOADING COMPACT DISC PLAYER AM/FM STEREO WITH DIGITAL TUNING RADIO www.pyleaudio.
Speaker Connection DEAR CUSTOMER Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers. We want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most important, without affecting your sensitive hearing. Sound can be deceiving.
DISC PLAY: INSTALLATION Cleaning discs Before playing, clean the disc with a clean, lint-free. Flip the disc in the direction of the arrow. DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT NOTE: . Do not use so solvents such as benzine, thinners. Commercially available cleaners or anti static spray damage the unit. Insert a disc with the label surface down. Doing so may damage the unit.
SPECIFICATION LOCATION AND FUNCTION OF CONTROLS 1 2 3 4 5 6 7 GENERAL Power requirement..............................................................................................DC 13.8V. Current consumption..............................................................................................7A MAX. Power output.........................................................................................................
BALANCE CONTROL TROUBLE SHOOTING 1). Press the SEL button to select the balance mode until BAL appears on the display. Before going through the check list, wiring connection, should any of the problem persist after check list has been made, consult your nearest service dealer. 2). Press the + button or - button to increase or decrease the sound level of left or right speaker. FADER CONTROL 1). Press the SEL button to select the fader mode until FAD appears on the display.
9. CLOCK ADJUSTMENT BUTTON During TUNING or CD state, press the button to change to clock function. To adjust hour: with time on display, push the tune completed, release the button. To adjust minute: with time on display, push the tune completed, release the button. 19. LOCAL/DISTANCE BUTTON Press it for distance reception when you are located at weak signal location, depress it for stronger signal. button adjust hour, when adjustment is 20.
