PLCD65WXMU OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • CD Player/MP3 Player/WMA Player • Automatic Memory Storing • Full Detachable Panel • Preset Equalization • Electronic Shockproof (ESP) Function • USB Interface • Auxiliary Input Function • Remote Control www.pyleaudio.
CONTENTS Pausing playing................................. 11 Previewing all tracks ......................... 11 Repeating the same track ................. 11 Playing all tracks in random .............. 11 Selecting tracks by AS/PS/D-AUD button ...............................................11 Display information ........................... 12 WMA operation ...................................12 USB play operation.............................12 Record operation ................................
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before install the unit, please remove the two screws. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation.
INSTALLATION grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard. Sleeve L Key Outer Trim Ring Front Panel Spring Washer Hex Nut Metal Strap R Key Mounting Bolt Plain Washer Tapping Screw 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N Factory Radio Mounting Bracket Screw Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL 1. Press the release button ( ) on the front panel and pull off the front panel. Precautions when handing 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION MAIN UNIT ANTENNA CONNECTOR (BLACK) RED IGNITION SWITCH (ACC+) MEMORY BACK-UP (B+) YELLOW Lch WHITE FUSE (GREY) RCA CABLE BLACK GROUND (B–) POWER ANTENNA FRONT Lch SPEAKER REAR Lch SPEAKER Rch RED AUX IN CABLE FUSE Rch RED Lch WHITE BLUE WHITE GREY WHITE/BLACK GREY/BLACK GREEN VIOLET GREEN/BLACK VIOLET/BLACK 7 FRONT Rch SPEAKER REAR Rch SPEAKER
OPERATION LOCATION OF KEYS 17 7 18 15 10 16 13 19 6 1 5 20 21 8 11 9 22 14 23 2 12 8 4 3 24
OPERATION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except button (7) and button (4)). When system is on, press POWER button (9) to turn off the unit. MUTE Press MUT button (3) to mute down the sound instantly. If any button is pressed in the mute state, the mute state is released. FACEPLATE RELEASE Press button (7) to detach the removable faceplate.
OPERATION • SELECTING STATION Press TUNE/TRACK button (17) or TUNE/TRACK button (16) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.
OPERATION => “Searching Directory or File Name”=> “Navigation” from root by TUNE/TRACK UP/DOWN buttons => “Navigation” from current directory by TUNE/TRACK UP/DOWN buttons. • Searching Track Directly Press AS/PS (D-AUD) button for one time. It enters into “Searching track directly” in Digital Audio CD. The unit searches the track selected by following direct numeric buttons: M1-M6, MOD (7), TUNE/TRACK DOWN (8), TUNE/TRACK UP (9), DSP(0). If selected three digits, the unit searches the track at once.
OPERATION • Searching From Root Directory Press AS/PS (D-AUD) button for three times. The unit searches file or directory from root by TUNE/TRACK UP/DOWN buttons. (D-DIR icon turns on if the name is directory). Display will list all available directories and songs. Select the desired directory/songs by using TUNE/TRACK UP/DOWN buttons and BND/LOU (ENT) button to confirm. If the selected title is a song, it starts to play.
OPERATION in the device, the operation is the same with the MP3 operation described above. Note: • The main unit can only support the standard USB-memory disc which is approved by Microsoft. • USB MP3 player is not a standard which means different brand name or different models have their own standard. So our product cannot support every MP3 player.
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 10 11 14 15 16 FUNCTION KEYS & CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
SPECIFICATION GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 KHz) Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 178 (W) x 160 (D) x 50 (H) : : : : ± 10 dB ± 10 dB 4 x 50 Watts 15 Ampere (max.) CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 45 dB : 40 Hz - 18 KHz RADIO FM 87.5 to 107.9 MHz 10.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power. Disc cannot be loaded or ejected. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Presence of CD disc inside the player.
