OWNER'S MANUAL ANTI-SHOCK CD / MP3 PLAYER CD CHANGER CONTROL AUXILIARY INPUT SUPER POWER OUTPUT ANTI-THEFT FLIP DOWN DETACHABLE FACE FM/AM BAND RADIO RECEIVER REMOTE CONTROL MODEL: PLCD68MP3 Page.
LOCATION OF CONTROLS FIGURE A REMARK : AT ANY TIME, IF THE WIRE IS DISCONNECTED, THE RESET SWITCH MUST BE PRESSED AGAIN BEFORE OPERATE THE RADIO (REFER TO PAGE 6 FOR DETAIL). OTHERWISE, THE RADIO MAY NOT WORK PROPERLY. OPERATING INSTRUCTIONS 1. POWER ON/OFF CONTROL Press the button to turn the power “ON” or “OFF”. Note : The unit can be turn on by pressing any keys on the panel (except panel release button & disc eject button). It will help the user who cannot find the power button in dark. 2.
SETTING CLOCK TIME MANUALLY Briefly press CLK button until clock time appear on the display. Press and hold the button until the clock flash and release CLK button. While clock is flashing, rotate volume control button clockwise to set HOUR and anti-clockwise to set MINUTE. 8. MUTE CONTROL Press the button to mute volume control and “MUTE ON” will appear on the display. 9. DISC EJECT BUTTON Press the button to eject the disc inside disc slot. 10.
16/17. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1 second can performs fast tuning function or auto tuning function. On CD/MP3/CDC mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD/MP3 track. 18.
CHARACTER SEARCH (OPTIONAL) • Press “AMS” button 3 times and “Char srch” will be shown on the display. • Press “SEL” to enter into character search mode and “A” will appear on the display for you to enter first character. • Enter whole name of files (maximum 8 characters) by Rotating volume control button clockwise or anti-clockwise to shift “A-Z”, “0-9” & “ ” (space) in loop rotation. • Press “SEL” shortly to select the first character. • Repeat the same procedure to enter the other characters if required.
INSTALLATION REMOTE CONTROL CAUTION : DO NOT PLACE THE UNIT OVER THE M A X I M U M I N S TALLATION ANGLE OF 30°. OTHERWISE, THE UNIT MAY NOT WORK PROPERLY. WARNING!! Due to protection of CD Mechanism, two small screws on the top of the unit must be released before operate the unit. Otherwise, the CD Mechanism can not be working properly. UNIT REMOVAL 1. Remove Front Control Panel. 2. Slightly insert the key into the slot and gently to release. 3. Separate the sleeve from the unit.