PLCDCS330MP OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Car CD/MP3/WMA Player • Cassette Player • Automatic Memory Storing • Preset Equalization • Slide Down Undetachable Panel • Auxiliary Input Function • Remote Control www.pyleaudio.
CONTENTS Installation ...........................................3 Wiring Connection ..............................4 Operation .............................................5 Location of keys....................................5 Switching on/off the unit .......................6 Sound adjustment.................................6 Loudness ..............................................6 Set the clock .........................................6 Mute ......................................................
INSTALLATION Installation onto the car bracket using supplied screws (M5 x 6mm). The holes of the car bracket to use will differ depending on the car model.
WIRING CONNECTION MAIN UNIT ANTENNA SOCKET SUBWOOFER CABLE (GREEN) IGNITION SWITCH (ACC+) MEMORY BACK-UP (B+) GROUND (B–) RED FUSE (BLACK) Rch RED AUX IN Lch WHITE YELLOW (GREY) BLACK RCA CABLE Rch RED Lch WHITE POWER ANTENNA FRONT Lch SPEAKER REAR Lch SPEAKER BLUE WHITE GREY WHITE/BLACK GREY/BLACK GREEN VIOLET GREEN/BLACK VIOLET/BLACK 4 FRONT Rch SPEAKER REAR Rch SPEAKER
OPERATION LOCATION OF KEYS 21 20 19 22 4 11 1 18 6 27 9 7 16 28 14 12 13 5 26 5 15 17 8 25 23 24 10 2 3
OPERATION • SET THE CLOCK Press the DSP button (15), the clock is shown on the LCD display. Then hold down the button until the clock flashes. Then press the TUNE/TRACK/SKIP button (17) to change hours or TUNE/TRACK/SKIP button (16) to change minutes. Note: In this product design, there has different sound accompanying with every button pressed and the sound is designed differently according to the customers.
OPERATION • STATION STORING Press any one of the preset buttons (18) (1 to 6) to select a station which had been stored in the memory. Press this button for several seconds (until 2ND beeps come out), current station is stored into the number button. RADIO OPERATION • SWITCHING TO RADIO MODE Press MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.
OPERATION • SWITCHING TO CD MODE If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD is drawn into the driver automatically. CD playback begins. If a CD is already inserted in the driver: Keep pressing MODE button (6) shortly until the CD mode display appears.
OPERATION selecting each mode of Digital Audio. “Searching track directly” => “Searching Directory or File Name”=> “Navigation” from root by TUNE/TRACK/SKIP UP/DOWN buttons=> “Navigation” from current directory by TUNE/TRACK/SKIP UP/DOWN buttons. MP3 OPERATION • SWITCHING TO CD (MP3) MODE If there is no MP3 disc inserted in the driver: Gently insert the MP3 disc with the printed side uppermost into the disc slot (5) until you feel some resistance. The MP3 disc is drawn into the driver automatically.
OPERATION confirm and start the play. - Repeat the above steps if the newly selected title is again a directory. contents…) and other information. KEY Assigned IN Searching mode (Table 1) Searching From Root Directory Press AS/PS (D-AUD) button for three times. The unit searches file or directory from root by TUNE/TRACK/SKIP UP/DOWN buttons. (D-DIR icon turns on if the name is directory). Display will list all available directories and songs.
OPERATION DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction. 3. Dirt, dust, scratches and warping discs will cause misoperation. WMA OPERATION The unit that can play the WMA disc and the operation is the same with MP3 operation described above.
REMOTE CONTROL HANDSET 1 7 4 3 8 9 6 5 13 2 12 10 11 14 15 FUNCTION KEYS & CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
SPECIFICATIONS GENERAL Power Supply Voltage Chassis Dimensions Loading Impedance Maximum Output Power Current Drain : : : : : 12 Volts DC, Negative Ground 200 mm (W) x 138 mm (D) x 100 mm (H) 4 - 8 Ω per channel 4 x 50 Watts 15 Ampere (max.) CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 50 dB : 20 Hz - 20 KHz CASSETTE PLAYER Tape Speed Fast Forward Time Frequency Response Channel Separation Crosstalk Wow and Flutter : : : : : : 4.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom No power. Disc cannot be loaded or ejected. Cassette tape cannot be loaded or ejected. No sound. Sound skips or sound quality is poor. The operation keys do not work. Cause Solution The car ignition switch is not on.
MAINTENANCE 3. Clean the tape head with the cotton swab. For System The following suggestions help you care for the product so that you can enjoy it for years. 1. Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. 4. Clean the capstans and the pinch rollers with the cotton swab. 2. Keep the product away from dust and dirt, which can cause premature wear of parts. 5.
CAUTION 3. Your unit has built-in filtering to eliminate most of the noise that might come through the power source. However, with some vehicles, particularly older models, some clicking or other unwanted noise might be present. 1. This unit is designed to operate on 12-volts DC, negative ground electrical system only. Do not attempt to install this unit in a vehicle having a positive ground system. 2. You should not touch the high-polished playback head with any metallic or magnetic tools.
