Instruction manual

USB Play Operation
This disc player offers you the option of
using the auxiliary A/V input (43) to
connect a video game, digital camera
camcorder or other units you wish to use
in your mobile audio video system.
1
2 Press the button (6) to switch
to the mode on or off.
jack
/
/
) To connect with a mobile audio/video
system by AV IN cable
.
.
.
)MODE
AV IN
AV In Operation
14
This disc player offers you a memory card
slot (42).
When you insert a SD/MMC card into the
memory card slot (42), the DVD player
will read the card automatically.
The unit gives first priority to the latter. If
insert a disc into the disc slot ( ) while
read the SD/MMC card, the unit will play
the disc. Press (24) button to enter into
PRE-STOP mode, then press
button (25) to switch to the reading card
mode.
When reading the memory card, please
don't touch or take out the card.
If following the instruction above, the unit
can't read the card, please check if the
card is in good condition, or tack out the
card then insert it into the card slot once
more.
Using the SD/MMC card:
GOTO
Note:
SD MMC/
5
<
Memory Card Play Operation
This disc player offers you a USB slot
(27). A USB driver can be connected
through this slot.
When you insert a USB driver into the
USB slot (27), the DVD player will read
the USB automatically.
The unit gives priority to the latter. If
insert a disc into the disc slot (5) while
read the USB driver, the unit will play the
disc. Press (24) button to enter into
PRE-STOP mode, then press
button (25) to switch to the reading USB
mode.
When reading the USB device, please
don't touch or take out the device.
If following the instruction above, the unit
Using the USB driver:
GOTO
Note:
<
can't read the device, please check if the
device is in good condition, or tack out
the device then insert it into the USB slot
(27) once more.
The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
USB MP3 player is not a standard
which means different brand name or
different models have their own standard.
So our product cannot support every MP3
player.
When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB slot.
Otherwise, it may cause battery burst.
When in USB play mode, be sure not to
remove the USB driver from the USB slot.