PLD57MU OWNER'S MANUAL Mobile Video System Motorized Slide Down And Detachable Panel 3.6 Inch Wide TFT Color Monitor Car DVD/VCD/CD/MP3 Player AM/FM Digital Pll Tuning Radio MPEG4 Player USB Connect Remote Control www.pyleaudio.
CONTENTS Safety Information...................................................................................... 2 Disc Notes ................................................................................................. 3 Installation ................................................................................................. 4 Change Angle .............................................................................................7 Electric Connection ............................................
SAFETY INFORMATION CAUTION: THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player VIDEO MP CD-RW 3 unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
INSTALLATION NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION DASH BOARD HEX NUT METAL MOUNTING STRAP SPRING WASHER CONSOLE PLAIN WASHER SLIDE BRACKET HOUSING TAPPING SCREW HEX BOLT KEY PLATE PLASTIC COVER KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
INSTALLATION How To Remove And Install The Front Panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching The Control Panel Before detaching the control panel, be sure to turn off the power. 1.Press the release button and the left hand side of the front panel will release. (FIG. 1) 2.Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG.
CHAGNE ANGLE CHANGING THE CONTROL PANEL ANGLE When you want to change the viewing angle of the operating unit to play, you can press the (angle)button repeatedly to select the desired angle as follows: Angle 1 Angle 2 Angle 4 Angle 3 Caution: Do not insert your finger behind the control panel.
ELECTRIC CONNECTION WIRING CONNECTION MAIN UNIT WHITE GREEN YELLOW AUX(optional) ANTENNA CONNECTOR RCA CABLE IGNITION SWITCH(B+) RED MEMORY YELLOW BACK-UP(B+) GROUND(B-) REAR RCA OUTPUT CABLE (optional) CHOKE BOX FRONT RCA OUTPUT CABLE BLACK (B+)12V REAR CAMERA SWITCH (B-)PARKING BRAKE REAR CAMERA INPUT VIDEO IN YELLOW RCH IN RED LCH IN WHITE GREY SUBWOOFER VIDEO OUT 2 YELLOW COAXIAL OUT BROWN RCH RED LCH WHITE FRONT RCA RED R VIDEO OUT 1 YELLOW FRONT RCA WHITE L (FOR RCA LINE OUT VERSION ONLY)
REMOTE CONTROL 15 16 3 17 7 2 5 19 20 13 21 6 22 1 23 14 ENTER 9 18 12 24 11 10 25 4 8 1. CLK 2. MODE 3. STOP 4. SETUP 5. MO/ST(AUDIO) 6. SUBTITLE LO/DX 7. REPEAT 8. GOTO 9. / 10. SEL 11. VOL+/VOL12. / / / 13.MENU SUB WOOFER 14.BAND(OSD) 15.POWER 16.PLAY/PAUSE 17.MUTE 18.TITLE/PBC (A/P) 19. 20.ANGLE 21.EQ 22. / 23.ENTER 24. 0 - 9 25.+10 Press it to change the display to clock display. Press it to change between RADIO ,DISC and AUX IN mode. Press it to stop playback.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ).
BASIC OPERATION 1 3 15 14 11 6 13 18 5 10 SEL 4 12 8 16 9 17 7 2 1.REL BUTTON Press the REL button to detach the removable front panel. 2.PWR On/Off BUTTON Press this button to switch the device On, WELCOME appears in the display. Press it again to switch the device Off, SEE YOU appears in the display. 3-4.
BASIC OPERATION 6. EQ BUTTON Swing the SEL knob in the direction of the EQ to turn to equalization function and to select desired audio mode. There are four kinds of mode as below: JAZZ CLAS POP ROCK 7. APS/DISP BUTTON In Radio Mode: a) Memory function: swing the SEL knob in the direction of APS/DISP for approximately 2 seconds to active automatic station storage. The radio searches within the current frequency band, e.g.
BASIC OPERATION To wind through the tracks keep the SEL button pressed in the or direction for about 2 seconds. FF X2 appears in the display. Operating the SEL button again, the speed of rapid forward/reverse changes according to the disc as follow: DVD/VCD/CD/MP3: Normal Playback 2x 4x 8x 16x b) In Radio Mode: Move the SEL button in the direction of or in order to set a radio station manually.
BASIC OPERATION TOP/RPT/INT/RDM FUNCTION (Only for the RC.) A.To memorize the current frequency, press any one of the six preset buttons[1-6] on the remote controller hold for more than 2 seconds. B.To recall the preset memory, press one of the preset buttons [1-6]. C.Press 1/TOP button to select the first track/chapter to play. a. In the state of VCD/CD/MP3 disc playing, press the button to select the first track/chapter to play.(depend on the disc used for VCD) b.
BASIC OPERATION MP3/WMA/JPEG DISC PLAY 1.When inserting an MP3/WMA/JPEG disc. Ex: When Mp3 file is detected. 5 4 3 00:56 2 003/112 6 1 .Current track(file)(highlighted bar) 2 .Current track (file) number/total 04:07 number of tracks(files) in the current folder. 3 .Elapsed playing time of the current track( not available for JPEG disc) Mp3 K P 4 .total playing time. ( not available for Mp3 JPEG disc) 1 woman 1 5 .Selected playback mode Mp3 new ton (Play), 6 .Operation mode icon. ....... .......
BASIC OPERATION TFT MONITOR OPERATION Press SEL ( 4 ) button briefly to across the sound/picture mode selection menu by repeatedly pressing the SEL button you can select the individual menu items such as volume, bass, treble, balance, fader, color, bright, contrast and tint . Then rotate the VOL + / - to adjust the selected mode. (The corresponding value will show on the display.) When mode has not been adjusted for several seconds, display returns to normal radio or CD display.
BASIC OPERATION USB Operation On-Screen Display Function A.Plug the USB connect line to the USB socket (see number 17) of the unit properly,(See fig.1) when the USB appliance connect to the USB port of the connect line, the system star playing track of the USB appliance automatically. B. IN USB playing , you can press the cursor button to select the item.Then press ENTER button to playing. also press numeric to play the corresponding track directly.
BASIC OPERATION Notes: - The language number is different according to the disc. - Some discs only contain one subtitle language. - When no different subtitle language are recorded, will be displayed at screen left top corner. e.Press OSD for the fifth time: The message on the screen will be cleared for SVCD and VCD. C.
SETUP GENERAL SETUP --- GENERAL PAGE --DOLBY DOLBY -----General setup page---- -----General setup page---TV Display LB TV Display Normal/PS Angle Mark ON Angle Mark Normal/LB OSD Lang ENG OSD Lang Wide Spdif Output SPDIF/RAW Spdif Output Captions ON Captions Screen Saver ON Screen Saver Last Memory ON Last Memory Set TV Display Mode Go To General Setup Page TV Screen 1. Press SETUP button on the remote control . 2.The SETUP menu is displayed. 3.
SETUP DOLBY DOLBY -----General setup page---- -----General setup page---- TV Display TV Display Angle Mark ON Angle Mark OSD Lang OFF Osd Lang Spdif Output Spdif Output Captions Captions Screen Saver Screen Saver Last Memory Last Memory SPDIF OFF SPDIF/RAW SPDIF/PCM Set Angle Mark Setup SPDIF 2. ANGLE MARK DISPLAY SETUP If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear. 4.
SETUP SPEAKER SETUP DOLBY --- SPEAKER SETUP PAGE --DOLBY -----General setup page---TV Display -----Speaker Setup Page---- Angle Mark OSDLang DOWNMIX Spdif Output LT/RT STEREO Captions Screen Saver ON Last Memory OFF Set Downmix Mode Screen Saver This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output.
SETUP PREFERENCES SETUP --- PREFERENCES PAGE --DOLBY DOLBY -----Preference Page---- -----Preference Page---- TV Type PAL TV Type Audio AUTO Audio French Subtitle NTSC Subtitle Spanish Disc Menu Disc Menu German Parental Parental Password Password Default Default This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.Select PAL format, when you connected to PAL TV.
SETUP DOLBY DOLBY -----Preference Page---- -----Preference Page---- TV Type 1KID SAF TV Type Audio 2G Audio 3PG Subtitle 4PG13 Disc Menu 5PGR Parental Subtitle Disc Menu Parental Password Default 6R Password 7NC 17 Default RESET 8 ADULT OFF Load Fcatory Setting 7.DEFAULTS Set Parental Control Select reset to become factory initial setting. 5.PARENTAL Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.
SPECIFICATION GENERAL Supply Voltage Current Consumption SIGNAL SYSTEM : 12v Dc (11v-15v) : More Then 10 A : Compositive Video 1.
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.