Product Manual InstalIation Instructions Rear View Camera System © 2009-2010 Rear View Safety Inc.
Table of Contents Important Notice 4 Warning 5 Safety Precautions 5 Before You Begin Installation 6 Installation Diagram 7 Features/Specifications 8 Specifications 9 Positioning 10 Dimensions - Camera 11 Dimensions - Monitor 12 Product Info - Camera 13 Product Info - Monitor 14 Monitor Control and Operation 15 Troubleshooting 16 Warranty 17 3
IMPORTANT NOTICE Please read thiswith manual before proceeding installation. Congratulations on your purchase of a Rear View Backup Camera System. Your Backup Camera System is designed to provide you with many years of trouble-free.
WARNING n The monitor should be situated away from direct sun light, heat, water or moisture. (This product is made with precise electronic components that should be handled with care. Do not let it fail because of improper use. SAFETY PRECAUTIONS n The rear view system is intented to be used when the vehicle is in reverse. Please do not watch movies or operate the monitor while driving. It may result in accident because of distraction.
BEFORE YOU BEGIN INTALLATION: Before Drilling please check that no cable or wiring is on other side of wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot or moving parts and electrical noisy components. We recommend doing a Benchmark test before installations to insure that all components are working properly. Step 1 Choose the monitor and camera locations.
Installation Diagram 3 Fuse Monitor Notes When installing the 1 (one) camera setup use port # labeled “backup” on some models its port #2 and others port #3 To automatically turn camera ON while shifting reverse, connect blue wire to reverse gear light/fuse and plug camera into port # labeled “Backup”.
Installation Notes To automatically have camera and monitor turn ON when vehicles activates, simply twist BLUE positive trigger 12V+ to Red Power line 12V+ and wire to ignition power which can be an accessory switch/fuse line. When using a 2 camera setup, use ports #'s 2 and 3 For Safety reasons, on some 1 camera setup systems, when port # “Backup” is activated it overrides port #1. On these systems customer can have system ““on” all the time (see note above) or just in “reverse” not both options.
Features/Specifications Features Free voltage (DC12V or DC24V) available for Camera 1/Camera 2/Camera 3 (Mirror/Normal image) Video distributor and booster to maintain image quality. Automatically switches to reverse image when backing vehicle. Auto switcher for video signal. Night Vision: 18 powerful LEDs allow seeing rearward in total pitch darkness, as if using a spotlight. Audio/Video output (RCA terminal).
Specifications 4 5 Port #3 Camera - Port #2 Camera Port #1 Camera 2 Backup 10
Positoning Backup Camera 11 Monitor
Dimensions - Camera (mm) 12
Dimensions - Monitor (mm) (some models) 13
Product Info 14
Product Info 7”(L) x 5” (H) x 1”(D) Rear View Safety Inc. reserve the right to change or modify product specifications or measurements without notice.
Monitor Control and Operation 1 1 2 3 4 5 2 3 4 5 6 7 8 Earphone jack. Audio/Video devices input jack. Lower volume. When in Menu mode: selection key. V1/V2 - Channel selection. Switches from Camera 1, 2 and 3. Menu key: Brightness Contrast Color Volume Dislay mode: 16:0 or 4:3 Tcon: rotate image 360° AV select (same as V1/V2 - channel selection). Language selection: English, Chinese, Japanese, German, French, Spanish, Portuguese and Russian. ■ ■ ■ ■ ■ ■ ■ ■ 6 Higher volume.
Troubleshooting Monitor will not power up / no backlight on power button • Check fuse • Check 12v+ to monitor. • Check ground connection. No image on screen • Verify camera is on correct camera input. • Verify cable is connected to monitor. • Verify camera is connected to cable. • Connect known good camera and cable to monitor. • Verify Blue trigger is receiving power. • If image appears connect cable to existing camera • If image remains replace original cable.
Warranty One Year Warranty Rear View Safety Inc. warrants this product against material defects for a period of one year from date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. Rear View Safety Inc. is not responsible for a defect in the system as a result of misuse, improper installation, damage or mis-handling of the electronic components. Rear View Safety Inc. is not responsible for consequential damages of any kind.
Rear View Safety, Inc. 1680 Atlantic Ave # 301 Brooklyn, N.Y. 11213 (800) 764-1028 www.rearviewsafety.