Owner`s manual

-14-
-15-
Basic Operations
If no operations are executed within
10 seconds after the PBC MENU is
displayed, the unit will continue to
play from the first track.
When playing this type of discs:
1. Press the MENU button long to setup
PBC.
2. Press the digital buttons to enter the
segment of the track you want to play.
If the segment or track has two digits,
please input the two digits
continuously.
MENU SET-UP
Warning!
Select button
Press SEL' ' button to select the volume
mode to adjust as following:
1 BAS adjustment
Press 'SEL' button once, BAS will
be activated, then depress VOL '+/-'
button to adjust the bass output.
2 TRE adjustment
Press 'SEL' button twice, TRE will
be activated, then depress VOL '+/-'
button to adjust the treble output.
3 BAL
Press 'SEL' button three times, BAL
will be activated, then depress
VOL'+/-' button to adjust left or right
sound channel output.
Basic Operations
In order to get the best display effect of
image. You must adjust the signal
system to make it match with TV set.
1. There are three kinds of TV colour
signal systems to select: NTSC, PAL
or AUTOMATISM mode.
2. Press 5P/N every time it will select a
kind of TV colour signal system
conversion among NTSC, PAL and
AUTOMATISM mode.
N/P/AUTO
1. Press OSD button to pop-up the
Control Menu.
CONTROL OPERATION
2. The On-Screen display function is
valid only in DVD/DVD Audio/DVD-
VR/ VCD discs, and the display
results may differ among some types
of disc.
RANDOM PLAYING
1. Press 3RDM every time, the unit will
execute random playing disc
automatically.
2. In random playing mode, press it
again to resume normal playing mode.
This function is only valid in , VCD,
S-VCD and CD discs. When shut off
PBC function, random playing is valid
only in VCD/S-VCD discs.
Warning!
you want to enjoy. This type of menu can
also be called PBC (Playback Control).
BASL TRE BAL FAD LOU
BRT CNT CLR
4 FAD
Press 'SEL' button four times, FAD
will be activated, then depress
VOL'+/-' button to adjust front or
rear louder-speaker output.
5 LOU
Press 'SEL' button five times, LOUD
will be activated, then depress
VOL'+/-' button to adjust. LOUD ON
to increase Loudness, and LOUD
OFF to decrease.
6 Adjust the video effect in VCD, DVD
reading mode. Press 'SEL' button
six times, CLR will activate this
function, then depress VOL '+/-'
button to adjust the display colour.
Press 'SEL' button seven times, CNT
will activate this function, then depress
VOL '+/-' button to adjust the display
contrast degree. Press 'SEL' button
eight times, BRT will activate this
function, then depress VOL '+/-' button
to adjust the display brightness.
If you do not performance any operation
after press 'SEL' , it will exit this
function automatically.
DIGITAL BUTTON
In radio mode
1. Press and hold any one button 1-6 on
remote control for over 2 seconds to
store the radio stations to the
memory you are listening .
2. From 1-6, press any one button to
call out the memory.
In disc playing mode
1. Digital buttons are used to select the
songs. If certain
10+ is only valid in
segment or track has
two digits, please input two digits
continuously. ''
VCD mode.
2. In disc playing mode, press and hold
7RPT button long means Single
song repeat / Full disc repeat/
Catalogue repeat. Press long again to
shut off this function.
' '
3. In disc playing mode, press and hold
8RDM button long means Random
playing. Press long again to shut off
this function.
' '
4. In DVD or VCD mode, press and hold
9P/N more than 2 seconds means
interchange between PAL/NTSC
systems.
' '
CLOCK DISPLAY BUTTON
1. Press to enter time display mode,
press again to exit this mode.
2. In time display mode, press SEL
button to enter second setting status,
second digital flashes , depress
VOL +/- to adjust the second. Press
SEL again to enter minute setting
status, depress VOL +/- to adjust.
Press SEL another time to enter
hour settingstatus, depress VOL+/-
to adjust.press it again to exit the
hour mode,press another times to exit
time display mode.
' '
' '
' '
' '
''
RADIO/STEREO/STOP
BUTTON
1. In disc playing mode, press this
button on remote control to stop
playing.
2. In radio mode, press this button
means sound channels changing
function.