Owner`s manual

Disc Handling And Maintenance
Disc UsingDisc Using
Correct
2 Do not stick the label or adhere things
on the disc.
Incorrect
3 Do not expose the disc into direct
sunshine or near the hot sources.
4 After playing, please store it into the
disc box.
1 To keep the disc clean, please hold the
disc edge only, do not touch its surface.
-5-
-24-
Disc CleaningDisc Cleaning
1 Before playing, wipe the disc with a
clean cloth, from the centre hole
towards the outer edge .
2 Never use alcohol, thinner, cleaning
fluid, static electricity prevention
liquids or any other solvent to clean
discs.
Disc StoringDisc Storing
After playing, please store the disc into
the disc box and keep them in room
temperature. It
can help to extend the
using life of the disc effectively.
Troubleshooting
What appears to be trouble is not always serious, when you meet
following problems in using, please check the following points before
calling a service.
Problem
Action
POWER
The power supply
has disconnected.
Please check whether the DC power has been
connected correctly.
PICTURE
NO PICTURE
Picture Distortion
SOUND
NO SOUND
Please check whether the disc has been inserted
correctly.
Please check whether the disc format.
The disc is too dirty and needs cleaning.
If the unit is playing in Fast-forward or Pause mode,
press Play to return to normal playing mode.
If the unit is playing in fast-backward mode, press
Play to return to normal speed playing mode.
When the unit is in System Setting Menu/ Program
Menu, press System Setting / PRG Play button to
exit this mode. Or press Play to return to normal
playing mode.
If the unit is in Mute mode, please press Mute again
to ensure the normal sound playing.
If the sound track 2 of S-VCD has not been recorded,
there will be no sound output when the track 2 is
selected. Open the Control Menu, and select track 1
in the audio caption to play.
Noise
The disc is dirty and needs cleaning.
Check whether the digital output is turned on.
Press Stereo to select stereo output.
No Stereo Effect
If the CD playing is DTS standard format, the noise
can t come from Digital output option or interphase.'