User's Manual MODEL NO.:PLDVCR600 PLDVCR500 view ◆ In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. ◆ Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 1 or ALL. ◆ is a 'Prohibition' mark. If this mark is displayed in operating the product, please wait for a while, then use it.
Important Safeguards The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated.
12 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
22 DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions.
Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ◆ Installation place and handling - When you place this player near other devices, they may affect poorly together. - When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).
◆ Tape and Disc Handling - Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure. ① Tape with mold ② Tape or disc stained with juice or attachments ③ Tape having breakage connection ④ Disassembled tape ⑤ Disc with severe scratch ⑥ Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape after the moisture condensation is disappeared. - After use, store tape vertically in a case to prevent loose.
Contents Important Safeguards Read Carefully before Using Advantages of This Product Are....
Advantages of This Product Are .....
Identificationof ofControls Controls Identification Front Panel ⑥ ② ③ ⑤ ④ ⑦ ⑨ ⑧ ① OPEN/CLOSE ⑬ ⑮ ⑪ ⑩ ⑭ ⑫ ① Open/Close button ⑩ Audio/Video in jack Connect these jack to the audio/video out jacks terminal of your game machine or camcorder using the RCA cord provided. If this key is pressed while power is supplying . disc tray will open,the open/close button lamp will light up in red then insert the disc and the disc will be played automatically ⑪ Remote control receiver.
Identification of Controls Play key. Press this key to playback a recorded tape, or to release special operation such as the search mode. In the playback mode the playback indicator lamp will be light in red, and Auto Tracking mode, this indicator lamp will blink. Rewind / Review key. If this key is pressed in the PLAYBACK mode, the VCR enters the reverse picture search mode. If pressed in STOP mode, then the tape will rewind at high speed. The REW indicator lamp will up in red. Stop key.
Rear Panel ⑨ ⑦ ⑤⑥ ⑧ ⑩ ④ ① ② ③ ④ DC JACK IN (DC 12V) For car using, we recommend to use this connector with 3-wire system. * Connector description for 4 ① ANT IN Connector. Connect the TV antenna (or cable if available- home use) to this connector. ② RF OUT Connector. This connectors provides an interface to the antenna input connectors terminal of your television using a coaxial cable. Tuner the television to channel 3 or 4 to watch video tapes. ⑤ IR INPUT Connect this terminal to remote control out.
REMOTE CONTROLLER 46 45 1 DVD & VCR Power On/Off 2 REPEAT Playback button [DVD] MENU button TITLE MENU button MOVE in OSD button A/V SEL button OSD DISPLAY button RETURN button CLEAR button PROGRAM button MUTE button GOTO button PBC button FF button F.
Instructions in Using REMOTE ▶ Operate REMOTE within 7m from the unit. ▶ Do not press 2(two) buttons at the same time.
Connecting with TV ■ In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in “CHANNEL SET”screen in VCR operation. ■ In connecting RF cable to TV, set TV channel to CH3. How to Connect with RF cable REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 OUTSIDE ANTENNA OR WALL ANTENNA OUTLET ANT IN RF CABLE 1. Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN”Jack in rear panel of TV. Connect the cable to “ANT.
Connecting with Cable Box If your cable system only requires you to use a converter box for some channels (i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable. Plug this cable into a splitter (available at your local electronics store.) Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.
Connecting with Other VCR or Camcorder 1. Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack in rear panel (or front panel) of DVD-Video with connecting cable. 2. Connect “ANT. IN”jack in TV to “RF.OUT”jack in DVD-Video with RF cable. 3. To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording tab in DVD-Video.
How to Copy(Edit) Tape with Other VCR or Camcorder 1. Turn on DVD-Video. 2. Press [OUTPUT] button of remote control and adjust DVD-Video to display "External Input 1" or "External Input 2" in TV screen. 3. Press [PLAY] button in Camcorder or playback video. 4. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video. 5. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.
LANGUAGE SETUP MENU Select DISC Menu Language Select AUDIO Language 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? EXIT SETUP LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP LANGUAGE SETUP LANGUAGE SETUP 2.
Select SUBTITLE Language 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP LANGUAGE SETUP 2. Press the select(ENTER) button then the "LANGUAGE SETUP" is displayed. LANGUAGE SETUP MENU T DISC MENU AUDIO SUBTITLE ENGLISH FRANCAIS DEUTSCH ESPANOL ITALIANO MAIN MENU LANGUAGE SETUP 3. Press the SHIFT ▼ button to select (ENTER) the "SUBTITLE".
DISPLAY SETUP MENU Set TV DISPLAY Mode Set TV TYPE 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? EXIT SETUP EXIT SETUP LANGUAGE SETUP LANGUAGE SETUP 2.
Set Picture Mode 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP LANGUAGE SETUP 2. Press the SHIFT ▼ button to select (ENTER) the "DISPLAY SETUP". Then the DISPLAY SETUP menu is displayed. SETUPM MENU TT ? LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP GOTO DISPLAY SETUP MENU 3.
AUDIO SETUP MENU DIGITAL OUT Setup DUAL MONO (1+1) Setup 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? EXIT SETUP EXIT SETUP LANGUAGE SETUP LANGUAGE SETUP 2. Press the SHIFT ▼ button to select (ENTER) the "AUDIO SETUP". Then the AUDIO SETUP menu is displayed. 2.
Setup DYNAMIC Range Compression 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU TT ? LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP LANGUAGE SETUP 2. Press the SHIFT ▼ button to select (ENTER) the "AUDIO SETUP". Then the AUDIO SETUP menu is displayed. SETUPM MENU TT ? LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP EXIT SETUP GOTO DISPLAY SETUP MENU 3.
PARENTAL LOCK SETUP MENU Change the Password Setup Parental Lock 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU SETUPM MENU TT ? TT LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP ? EXIT SETUP EXIT SETUP LANGUAGE SETUP LANGUAGE SETUP 2. Press the SHIFT ▼ button to select (ENTER) the "PARENTAL LOCK".
OTHERS SETUP MENU Screen Saver Setup the FM Transmitter ※ Option Function 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? ? EXIT SETUP LANGUAGE SETUP EXIT SETUP 2.
VCR SETUP MENU VCR Auto PLAY VCR OSD (On Screen Display) 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? ? EXIT SETUP LANGUAGE SETUP EXIT SETUP LANGUAGE SETUP 2.
VCR Auto Repeat 1. Press the "SETUP" button on the remote control. The initial MENU is displayd. SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? EXIT SETUP LANGUAGE SETUP 2. Press the SHIFT ▼ button to select(ENTER) the "VCR SETUP", then the VCR SETUP menu is displayed. SETUPM MENU LANGUAGE SETUP DISPLAY SETUP AUDIO SETUP PARENTAL SETUP OTHERS SETUP VCR SETUP TT ? EXIT SETUP GOTO VCR SETUP MENU 3.
OPERATING TV TUNER (Option Function) TV CHANNEL SET ※ NOTE : If RF-Sigmal is not input, searching channel will be displayed blue-back picture. 2. Press A.SEARCH button on the remote control, then channels will be found and stored automatically. 1. Press "A/V SEL." button on the remote control, until " TV" is selected. While the "AUTO SEARCHING" is progressing, channels will be changed up to 69. (DVD ▶ TV ▶ CATV ▶ AV1 ▶ AV2) TV 02 TV CHANNEL SET CH ** AUTO SEARCHING............... 3.
Other's Operation Using a zoom function A user can enlarge the current screen about 2,4 or 8 times. Keep pressing [ZOOM] button till the preferred zoom appears. Every time a user presses [ZOOM] button, a zoom magnification changes 2 times ( X2 ) → 4 times ( X4 ) → 8 times ( X8 ) → OFF → 2 times ( X2 ) ... one by one. A base point to be enlarged is center and the point can be changed with the operation of [◀, ▶, ▲ , ▼ ] button.
To skip chapter in a DVD 1. Press POWER button to power on. 2. Press [OPEN/CLOSE] button to open the disc tray. 3. Insert the disc and press [OPEN/CLOSE] button to close the tray. 4. To playback it, press [PLAY/PAUSE] button. 5. To move to next chapter, press F.SKIP( ) button. SLOW PLAY/PAUSE R.SKIP STOP FF SKIP BUTTON F.SKIP CH3/CH4 VCR TV/VCR EJECT A. SEARCH REW PLAY PAUSE/STILL ENCORE FF STOP AUDIO REPLAY --- TRK --- R.TRK The current chapter moves to the next chapter. 6. Press R.
Repeating a defined period You may repeat a desired chapter or track. 1. Keep pressing REPEAT button till the preferred system appears. DVD : Chapter Repeat on → Title Repeat on → Repeat off → Chapter Repeat on VCD : REP-ONE → REP-ALL → REP OFF → REP-ONE MP3(CD) : REP-ONE → Folder Rep → Folder → REP-ONE Also you can return to normal speed by pressing PLAY/PAUSE ( ) button.
To display menus in a disc If a disc includes menus, a user may use them. 1. Press "MENU" button. It shows menus in the disc. Also they are different according to discs. Move a cursor to a relative item with "MOVE IN OSD" buttons of ◀ , ▶, ▼, ▲ button and select one with "ENTER" button or "PLAY" button. POWER OPEN/CLOSE ANGLE REPEAT A-B SUBTITLE AUDIO REPEAT ZOOM TOP MENU MENU MOVE IN OSD button ENTER button ENTER Playable Disc : DVD 2. Press "PBC" button.
Repeating a defined period (DVD) You may repeat a desired chapter or track. 1 Select A-B Repeat Function In Play mode, press the REPEAT button, then press left/right to select A-B Repeat. o "A-" will highlight when A-B Repeat is selected. NOTE: If you are playing a CD, the menu will display "Track" in place of "Chapter" 2 Mark the Starting Point Press the ENTER button at the beginning of the segment you want to repeat (Point A). o "B" will highlight after Point A is selected.
About VCR VIDEO HEAD CLEANING The video heads enable the VCR to read video information pictures from the tape during playback. In the unlikely event that the heads become clogged with dirt video playback will be impossible. This can easily be determined during playback of a known good tape, there is good sound, but the picture is extremely snowy. If this si the case, have the video cassette recorder checked by qualified service personnel.
About DVD Playable Disc DVD,Video CD (Version 1.1,2.0),S-VCD and Audio CD Disc type DVD Video CD CD CD-R CD-RW DVD-R S-VCD Playable Possible Possible Possible Possible Possible Possible Possible Restriction Region number 1 or Region number All Version 1.0/1.1/2.
Terms related with DVD DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By using MPEG-2 video compression and digital 3D surround sound, DVD realizes highdefined screen and quality sound like a movie theater. CDDA A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
Before doubting about troubles (DVD) Symptom The recorder does not play. No sound comes through. A disc is playing but screen does not appear or poor screen appears. Sound is irregular REMOTE does not work. “AUDIO”or “SUBTITLE”button does not work. “ANGLE”button does not work while a DVD is playing. “MENU”does not appear while a DVD is playing. Screen shakes or appears only in black and white. (or Subtitle shakes) Checks - a If a DVD is from overseas, it may not be played.
Before doubting about troubles (VCR) Symptom “Power On”does not work. It does not work even in “Power On”. A videotape is not inputted in. Checks - a Please check whether a power plug is inserted in an electric outlet. - The Polarity of power cord is not correct. - Please check whether a videotape is inserted in. - a Try to insert a plug again. - Check circuit fuse at source of power. (see vehicle/converter manual.) - a Please check whether a power plug is inserted in an electric outlet.
Symptom While recording and playing, the top of screen extremely waves. A screen is not clear. Checks - a Since VCR Play signals are not stable like a TV signals, screen - a In case videotape is the one recorded by other products or old one, stripe may appear on the screen. - a Try to adjust the screen by [TRACKING+/-] button - a Try to use a head-cleaner. A screen at pause is trembling or slow screen is not clear. - Try to use a head-cleaner.
Specifications VCR PART Power Supply DC 12V Consumed electricity 24W Weight approx 3.9 Kg Dimension (WxHxD) 265mm x130mm x 275mm Operative temperature 5° C~35° C (Humidity : 80% maximum) Installation condition Horizontal Received channels VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125 Signal type NTSC-M Antenna Input/output U/V-mixed: 75½unbalanced VIDEO input 1.0 Vp-p 47k ohm unbalanced, RCA JACK AUDIO input Line Input -8.8dBm, 47k ohm minimum VHF output 3 or 4 CH VIDEO output 1.
Distortion Hi-Fi; sp/slp 0.7% Maximum Mono ; SP 4.0% Maximum/SLP 5.0% Maximum Wow Flutter Hi-Fi ; SP/SLP 0.012% Maximum Mono ; SP0.0300% Maximum/SLP 0.400% Maximum Hi-Fi Channel Balance SP/SLP ±3.0 Miximum Hi-Fi CH Seperation (A.
Analogue Audio output (2CH. L/R) * DVD : 48/96KHz sampling * VCD : 44.1KHz sampling * CD : 44.1KHz sampling Digital Audio output (COAXIAL) * DVD : 48KHz sampling * VCD : 44.1KHz sampling * CD : 44.1KHz sampling Vibration * Data read Operation : 0.25G(0'P), at 10 to 500Hz sweep, sine wave, 1 Octave/min(except resonance point) * Non-operating : 2.0G rms, at 10 to 500Hz random (30min/Axis for X, Y, Z) After test, there shall be no hard errors.
Operating time * Spin-up time : Less than 13 sec (Typical) * Stop time : Less than 2 sec(Typical) Laser parameters * DVD Semiconductor Laser / Wave length : 650nm / Emission power : 0.28 mV *CD Semiconductor Laser / Wave length : 780nm Emission power : 0.30 mV FM Transmitter *FM 88.1MHz ~89.9 MHz(11 Step, 0.
Pyle Audio Inc. 1600 63rd Street Brooklyn, NY 11204 www.pyleaudio.
