PLDVD140 OWNER’S MANUAL Mobile Video System • Digital Audio Out-Coaxial • Multi-subtitle Languages Function • Multi-audio Languages Function • Multi-angle Function • Parental Control • Remote Control
Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. FEATURES Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°.
CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 The Player ......................................................................................................6 Front View ...............................................................................................................6 Back View ...............................
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player Note these scratches are not an indication of any problem with the player. DVD 12 cm disc (Single-sided disc only) Label side up Video CD 12 cm disc CD 12 cm disc Do not touch the underside of the disc MP3 12 cm disc Do not bend Discs which cannot be played with this player • DVD-ROM • DVD-R/DVD-RAM • CDV • CD-G Wipe the disc from center toward the outside edge Handling and Cleaning • Dirt, dust, scratches and warping disc will cause misoperation.
THE PLAYER FRONT VIEW 3 1 14 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 13 10 7 6 12 5 9 8 22 11 4 POWER ( ) Eject ( ) SETUP AUDIO SOURCE Disc Slot PLAY/PAUSE( II ) STOP ( ) PREVIOUS ( ) ) NEXT ( VOLUME 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
THE PLAYER BACK VIEW 23 23. 24. 25. 26. 27. 24 25 26 27 28 28. 29. 30. 31. VIDEO 2 INPUT AUDIO 2 L INPUT AUDIO 2 R INPUT REMOTE Socket DIGITAL AUDIO 7 29 30 VEDIO 1 OUTPUT VEDIO 2 OUTPUT 14IN SOCKET SUB.
INSTALLATION Notes: TAKE OUT SCREW BEFORE INSTALLATION • Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before install the unit, please remove the two screws. Take out screw before installation • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation.
INSTALLATION Sleeve Spring Washer L Key Outer Trim Ring Front Panel Hex Nut Metal Strap Mounting Bolt Plain Washer Tapping Screw R Key 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appropriate tabs behind the dashboard to secure the sleeve in place. 10.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota or Suzuki, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) or S (Suzuki) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side view showing Screw Holes marked T, N or S Screw Factory Radio Mounting Bracket Hook Screw Hook Dashboard or Console To fasten the unit to the factory radio mounting brackets. 1.
CENTER_OUT BROWN RR_OUT BLACK RL_OUT BLACK AMP CONTROL(GREEN) GND(BLACK) ACC(RED) MEMORY BACK-UP(YELLOW) BLACK RED WHITE RED FR_OUT GREY FL_OUT GREY AUDIO 2 R IN AUDIO 2 L IN VIDEO 2 IN YELLOW VIDEO 2 OUT DIGITAL AUDIO GREEN (OPTIONAL) REMOTE CONTROL RECEIVER SUB WOOFER YELLOW WHITE WHITE RED WHITE YELLOW ELECTRIC CONNECTION RED
REMOTE CONTROL 8 9 4 5 1 2 3 6 7 10 11 12 14 13 15 16 18 17 19 20 21 24 23 22 25 28 29 32 26 27 30 31 12
REMOTE CONTROL 1. 2. 3. 4. POWER EJECT MUTE SUBTITLE 5. 6. 7. 8. 9. 10. ANGLE DISPLAY MODE SETUP PAL/NTSC AUDIO 11. TITLE 12. MENU 13. / , / 14. ENTER 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. / / / 0-9 10+ CLEAR VOLUME+/- 25. ZOOM 26. RESUME 27. 28. 29. 30. 31. 32. GOTO PBC RANDOM PROGRAM REPEAT A-B Press POWER to turn the unit ON or OFF. Press to eject the disc. Press to mute the sound. Changing of the SUBTITLE language on multi-subtitle language DVD disc.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented indicated. 3. Close the cover Battery: Two AAA size battery. Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal reciver). Operation angle: About ± 30 degree in each the direction of the front of the IR mark. Loading a Disc 1.
BASIC OPERATION Stopping Play - Brief press the (Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback. - Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter. Pause (still picture) Pressing on the remote control or on the front panel during playback will stop play temporary. Return to normal playback, press on the remoter control or on the front panel. MUTE Will mute the sound, but the disc continues playing.
BASIC OPERATION A-B A-B repeat allows a passage to be repeated continuously. Press A-B button at the start of the required passage, then press A-B button again at the end of the passage. To revert to normal playing, press A-B button again. Each time the button pressed, the screen will display as follows: A TO B SET A A TO B SET B PROGRAM In stop mode, press PROGRAM button, the screen will display “PROGRAM P00:00”. For example: press numeric button 4 and button, “PROGRAM P01:04” appears.
BASIC OPERATION (2) Press DISPLAY for the second time: On-Screen Display Function Press the DISPLAY button during playback to display the contents of the current disc on the screen.
BASIC OPERATION (4) Press DISPLAY for the fourth time: MONO LEFT TOTAL REMAIN 00:40:35 MONO RIGHT STEREO MENU Function (For DVD Only) Press MENU button while the disc is playing and the disc menu will be displayed. You can navigate with the remote control navigation keys and select a feature with the ENTER key. TOTAL TRACK : 14 TRACK : - 01 (5) Press DISPLAY for the fifth time: The message on the screen will be cleared.
BASIC OPERATION SETUP MP3 Disc Play INITIAL SETUP MP3 disc is playing as the format of FOLDER. For example: SETUP MENU --- MAIN PAGE GENERAL SETUP SMART NAVI ROOT SPEAKER SETUP ROOT 0 AUDIO SETUP MP3 MUSIC 1 PREFERENCES SKY MP3 HEAR YOUR PLAY MODE DISC EXIT SETUP 1. Press SETUP in the stop mode. (Press the stop button twice to ensure the player under STOP mode.) Use / , / to select the item or folder, then press ENTER button.
--- GENERAL PAGE --- GENERAL SETUP --- GENERAL PAGE --- TV DISPLAY TV DISPLAY NORMAL/PS PIC MODE AUTO PIC MODE NORMAL/LB ANGLE MARK HI-RES ANGLE MARK WIDE OSD LANG N-FLICKER OSD LANG CAPTIONS CAPTIONS SCR SAVER SCR SAVER MAIN PAGE MAIN PAGE PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on format on image or picture under noise affect.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --TV DISPLAY TV DISPLAY PIC MODE PIC MODE ANGLE MARK ANGLE MARK OSD LANG OSD LANG ENGLISH CAPTIONS CAPTIONS SCR SAVER SCR SAVER ON OFF MAIN PAGE MAIN PAGE SCR SAVER setup Select the SCR SAVER output ON/OFF. OSD LANG type setup Select the preferred OSD language by using the / buttons.
SETUP --- SPEAKER SETUP PAGE --- --- SPEAKER SETUP PAGE --- DOWNMIX DOWNMIX CENTER ON CENTER REAR OFF REAR SUBWOOFER SUBWOOFER ON CNTR DELAY CNTR DELAY OFF REAR DELAY REAR DELAY TEST TONE TEST TONE MAIN PAGE MAIN PAGE CENTER This is to activate the center speaker audio output ON or OFF. When set it to OFF, the CNTR DELAY item turns grey and can’t be used.
SETUP --- SPEAKER SETUP PAGE --- AUDIO SETUP --- AUDIO SETUP --- DOWNMIX 15MS CENTER REAR SUBWOOFER 9MS CNTR DELAY AUDIO OUT ANALOG OP MODE SPDIF/RAW DYNAMIC SPDIF/PCM LPCM OUTPUT REAR DELAY 3MS TEST TONE OFF MAIN PAGE MAIN PAGE REAR DELAY Select REAR DELAY and adjust the delay time for rear speaker audio output from 0 to 15MS. AUDIO OUT This is to activate the audio output from ANALOG mode to SPDIF/RAW mode to SPDIF/PCM mode.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- AUDIO OUT OP MODE FULL DYNAMIC 6/8 LPCM OUTPUT 4/8 TV TYPE AUTO AUDIO NTSC SUBTITLE PAL DISC MENU 2/8 PARENTAL OFF PASSWORD DEFAULTS SMART NAV MAIN PAGE MAIN PAGE TV type setup This player can play discs recorded in either PAL or NTSC format. Select NTSC format, when you connected to NTSC TV. Select PAL format, when you connected to PAL TV.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --TV TYPE TV TYPE 1G AUDIO AUDIO 2 SUBTITLE ENGLISH SUBTITLE 3 PG DISC MENU FRENCH DISC MENU 4 PG 13 PARENTAL SPANISH PARENTAL 5 PASSWORD CHINESE PASSWORD 6 PG-R DEFAULTS JAPANESE DEFAULTS 7 NC-17 SMART NAV OFF SMART NAV 8 ADULT MAIN PAGE NO_PARENTAL MAIN PAGE SUBTITLE language setup Select the preferred SUBTITLE language by using the cursor buttons.
SETUP --- PREFERENCES PAGE --- DEFAULTS TABLE General Setup TV Display TV TYPE AUDIO Normal/LB PIC Mode AUTO Angle Mark ON SUBTITLE OSD Language English DISC MENU Captions ON PARENTAL SCR Saver ON PASSWORD DEFAULTS RESET SMART NAV Speaker Setup Downmix Stereo Audio Setup Audio Out SPDIF/RAW OP Mode Line Out Dynamic FULL LPCM Output LPCM 96K MAIN PAGE Preferences TV Type DEFAULTS Select reset to become factory initial setting.
SPECIFICATIONS Supply Voltage Current Consumption Signal System Discs Played Audio Output Level Audio Signal Output Characteristics : : : : 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 2A Compositive video 1.0Vp-p 75Ω (1) DVD-VIDEO Disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact Disc (CD-DA) 5” (12cm) disc : 600Ω (2 ch 2.
www.pyleaudio.