PLDVD198 OWNER'S MANUAL Mobile Video System Digital Audio Out-Coaxial PLL Synthesizer Stereo Radio DVD Player Automatic Memory Storing Full Detachable Panel Preset Equalization Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control Remote Control www.pyleaudio.
Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. FEATURES Compatible with NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance.
CONTENTS Safety Information ....................................................................................... 4 Disc Notes .................................................................................................... 5 Installation ....................................................................................................6 Using the Detachable Front Panel ..............................................................9 Wiring Connection ..................................................
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF . . REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) Installation Opening Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause Malfunctions.
INSTALLATION 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appropriate tabs behind the dashboard to secure the sleeve in place. Spring Washer Hex Nut Metal Strap Mounting Bolt Plain Washer Tapping Screw Dashboard Tabs 10. Reconnect the cable to the vehicle battery's negative (-) terminal.
INSTALLATION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Side View showing Screw Holes marked T, N Screw Factory Radio Mounting Bracket Screw Hook Dashboard or Console To fasten the unit to the factory radio mounting brackets. 1.
USING THE DETACHABLE FRONT PANEL Precautions when handling REMOVING THE FRONT PANEL 1. Press the release button on the front panel and pull off the front panel. 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION 20 PIN SOCKET CONNECTION AUDIO R IN (RED) AUDIO L IN (WHITE) VIDEO IN (YELLOW)) AV IN CABLE(BLACK) ANTENNA CONNECTOR VIDEO OUT 1(YELLOW) VIDEO OUT 2 (YELLOW) DIGITAL AUDIO (ORANGE) AV OUT CABLE(GREY) FUSE REMOTE CONTROL RECEIVER ANTENNA SOCKET(OPTIONAL) FRONT RCA CABLE(BROWN) RED Rch WHITE Lch REAR RCA CABLE(GREY) RED Rch WHITE Lch (FOR RCA LINE OUT VERSION ONLY) BLUE POWER ANTENNA RED IGNITION SWITCH (ACC+) YELLOW BLACK FRONT Lch SPEAKER + - REAR Lch SPEAKER + - WHITE
LOCATION AND FUNCTION OF KEYS THE PLAYER 12 7 11 10 24 3 9 20 2 5 8 15 21 22 14 18 1. PWR (power button) 2. LOC 3. MUT 4. 5. Disc Slot 6. MODE 7. 8. Liquid Crystal Display 9. L/R (ST) 10. SEL 11. VOL 12. VOL 6 23 13 19 1 17 16 13. BND/LOU 14. 1~6 preset buttons 15. DSP 16. MANU/SKIP 17. MANU/SKIP 18. AMS 19. EQ 20. 21. RPT 22. INT 23. RDM 24. RX When remove the front panel: 26 4 25 25. LED 26.
LOCATION AND FUNCTION OF KEYS REMOTE CONTROL 24 27 1 5 3 32 8 6 2 9 25 28 31 30 26 4 10 7 29 15 12 18 19 11 13 23 20 17 16 22 14 21 33 12
LOCATION AND FUNCTION OF KEYS 1. POWER 2. MUTE 3. SUB-T 4. ANGLE 5. MODE 6. DISPLAY 7. SETUP 8. TITLE 9. PROGRAM 10. PBC (LOC) 11. SEL 12. / , / 13. OK 14. GOTO 15. 16. / 17. (SEEK+) / (SEEK-) 18. 19. EQ 20. 0-9 21. 10+ 22. MENU 23. VOLUME+/24. ZOOM 25. RESUME 26. LOUD 27. P/N 28. RANDOM 29. ST(AUDIO) 30. RPT(AMS) 31. A-B (BAND) 32. EJECT 33. SLOW Press POWER to turn the unit ON or OFF. Press to mute the sound. Changing of the SUBTITLE language on multi-subtitle language DVD disc.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new battery. Make sure that the positive and negative terminals of the battery are oriented as indicated. 3. Close the cover. Battery: a button cell lithium battery (CR2025 3V) Using the Remote Control Point the remote control towards the player front face remote sensor RX (remote control signal receiver).
LOADING/EJECTING A DISC Loading a Disc When all connections have completed, you can load a disc as follows: 1. Turn the ignition on to the accessory position. 2. Press the PWR button (1) on the front panel or POWER button on the remote controlto turn on the unit. 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player will start playback automatically. 2 3 1 Ejecting a Disc Press button (3) on the front panel or to (EJECT) button on remote controlto eject the disc.
OPERATION BASIC OPERATION SWITCHING ON/OFF THE UNIT MUTE Press PWR button on the front panel or POWER button on the remote control to turn on the unit. Press MUT button on the front panel or MUTE button on the remote control to mute down the sound instantly. Pres it again to resume sound output. FACEPLATE RELEASE EQUALIZATION Press button on the front panel to detach the removable faceplate. Press EQ button shortly to turn on equalization function and to select desired audio mode.
OPERATION - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. - Error symbol on the display. Note: if press RESET button, the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel. RADIO OPERATION SWITCHING TO RADIO MODE Press MOD on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency.
OPERATION DISC (DVD/VCD/CD/MP3) OPERATION FOR VCD: Normal playback STOPPING PLAY Briefly press the (Stop) button to stop the unit playback, when button on the front panel or button on the remote control is pressed, normal playback will continue. Press (Stop) button twice to stop the playback and go back to initial Track/Chapter. RAPID FORWARD/RAPID REVERSE Press & during play. Each time the button is pressed, the speed of rapid forward /reverse changes according to the disc as follow.
OPERATION On the front panel or RANDOM button on the remote control, track selection will be made in random order. The display screen will show “RANDOM ON” on the left-top corner. Then press button to start RANDOM playback. Press RDM or RANDOM button again in stop mode, “RANDOM OFF” appears and release the mode. PLAYING IN PROGRAMMED ORDER For CD: In stop mode, press PROGRAM button, the screen will display “PROGRAM P00:00”.
OPERATION Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time. (2) Press DISPLAY for the second time: (4) Press DISPLAY for the fourth time: TOTAL REMAIN 40:35 01/13 (5) Press DISPLAY for the fifth time: The message on the screen will be cleared.
OPERATION (2) Press DISPLAY for the second time: CHAPTER REMAIN 01/18 04:25 (3) Press DISPLAY for the third time: The message on the screen will be cleared. MULTI-AUDIO LANGUAGES FUNCTION For DVD: Press L/R (ST) button on the front panel or ST (AUDIO) button on the remote control during playback. Each time the button is pressed, the audio soundtrack language changes on sequential order. Notes: - The language number is different according to the disc. - Some discs only contain one language soundtrack.
OPERATION MP3 Disc Play played first, then press numeric button 6 and “PROGRAM P02:0006” appears. Press the different numeric button to select the corresponding track, and then press button or OK button to complete program setting and to play tracks in programmed order. And “PROGRAM P0” changes into “PROGEND” on the menu. When the tracks played in programmed order, press PROGRAM button to exit program mode, and “AUTO PLAY” shows in the menu. During playback, use or to skip an item ahead or back.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE -- GENERAL PAGE -TV DISPLAY NORMAL/PS PIC MODE NORMAL/LB ANGLE MARK WIDE GENERAL SETUP AUDIO SETUP PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP MAIN PAGE 1. Press SETUP on the remote control or on the DVD unit in the stop mode. (Press the stop button twice to ensure that the player is in STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferred item by using the / buttons. 4. Press OK button on the remote control.
SETUP -- GENERAL PAGE -- -- GENERAL PAGE -TV DISPLAY TV DISPLAY AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG ENGLISH CAPTIONS CAPTIONS FRENCH SCR SAVER SCR SAVER GERMAN PIC MODE SPANISH MAIN PAGE MAIN PAGE PIC mode setup OSD LANG type setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture with noise or distortion.
SETUP -- GENERAL PAGE -- -- AUDIO SETUP -SPDIF TY DISPLAY PIC MODE ANGLE MARK LINE OUT DUAL MONO RF REMOD DYNAMIC OSD LANG PRO LOGIC CAPTIONS SCR SAVER OP MODE LPCM OUTPUT ON OFF MAIN PAGE MAIN PAGE OP MODE - LINE OUT: Line out mode, with digital dialog normalization. - RF REMOD: RF remodulation mode, with heavy compression and digital dialog normalization. It is recommended to select LINE OUT mode. SCR SAVER setup Select the SCR SAVER ON/OFF.
SETUP -- AUDIO SETUP -- -- AUDIO SETUP -SPDIF SPDIF OP MODE DUAL MONO DYNAMIC FULL OP MODE 6/8 DUAL MONO 4/8 DYNAMIC PRO LOGIC PRO LOGIC 2/8 LPCM OUTPUT LPCM OUTPUT OFF LPCM 48K LPCM 96K MAIN PAGE LPCM OUTPUT Select the LPCM (Line Pause Code Modulation) OUTPUT between LPCM 48K and LPCM 96K. The higher the sampling frequency is, the better the output audio quality is. It is recommended to select LPCM 96K.
SETUP --PREFERENCES PAGE-- --PREFERENCES PAGE-- TV TYPE TV TYPE AUDIO ENGLISH AUDIO SUBTITLE FRENCH SUBTITLE DISC MENU SPANISH DISC MENU CHINESE PARENTAL FRENCH PASSWORD JAPANESE PASSWORD SPANISH DEFAULTS GERMAN DEFAULTS CHINESE PARENTAL ENGLISH JAPANESE MAIN PAGE MAIN PAGE GERMAN DISC MENU language setup Select the preferred DISC MENU language by using the cursor buttons AUDIO language setup Select the preferred AUDIO soundtrack by using the cursor buttons.
SETUP --PREFERENCES PAGE-TV TYPE DEFAULTS TABLE AUDIO General Setup TV display Normal/PS SUBTITLE PIC mode AUTO DISC MENU Angle mark ON PARENTAL OSD Language English PASSWORD Captions CHANGE DEFAULTS Audio Setup MAIN PAGE PASSWORD Select CHANGE and press OK button. Type the old password (The initial factory code is 3308) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.
TROUBLE SHOOTING If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. NO POWER If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. Check if the fuse is blown.
SPECIFICATIONS GENERAL Power Supply Requirements Chassis Dimensions Tone Controls Bass (at 100 Hz) Treble (at 10 kHz) Maximum Output Power Current Drain : 10 dB : 10 dB : 4x40 watts : 15 Ampere (max.) CD PLAYER Signal to Noise Ratio Channel Separation Frequency Response : More than 55 dB : More than 45 dB : 20Hz 20 kHz : DC 12 Volts, Negative Ground : 178 (W) x 160 (D) x 50 (H) RADIO Frequency Coverage IF Sensitivity (S/N=30dB) Stereo Separation Frequency Coverage IF Sensitivity (S/N=20dB) FM 87.
SPECIFICATIONS Supply voltage: Current consumption: Signal system: Discs played: Audio output level: Power output: 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 2A Compositive video 1.0Vp-p 75 (1) DVD-VIDEO disc 5” (12 cm) single-sided, single-layer 5” (12 cm) single-sided, double-layer (2) Compact disc (CD-DA/CD-R/CD-RW/MP3) (3) 5” (12 cm) VIDEO CD 10k (2 ch 2.0 Vrms) 4 x4 0W Note: Specifications and design are subject to modification, without notice, due to improvements in technology.
www.pyleaudio.