OWNER'S MANUAL Audio/Video System PLDVD199XM

Loading a Disc
When all connections have completed,
you can load a disc as follow:
1. Turn the ignition on to the accessory
position.
2. Press the PWR button (1) on the front
panel or POWER button on the remote
control to turn on the unit.
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
Ejecting a Disc
Press
(EJ) button (3) on the front panel
or
(EJECT) button on remote control
to eject the disc.
LOADING/EJECTING A DISC
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
Battery: a button cell lithium battery
(CR2025 3V)
Using the Remote Control
Point the remote control towards the
player front face remote sensor RX
(remote control signal receiver).
Operation angle: About  30 degree in
each the direction of the front of the
remote sensor.
REMOTE CONTROL
14
1
3
2