PLDVD65IN OWNER'S MANUAL Mobile Video System Vertical Adjustable And Horizontal Rotatable Panel 6.5 Inch Color TFT Monitor DVD/CD/MP3 Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control Remote Control www.pyleaudio.
CONTENTS Safety Information ....................................................................................... 4 Disc Notes .................................................................................................... 5 Installation ....................................................................................................6 The Player..................................................................................................... 9 Front View ........................................
Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. FEATURES Compatible with NTSC DVD (Video CD) This player can play discs recorded in either NTSC format. Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance.
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF . . REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Disc formats supported by this player unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.
INSTALLATION Notes: DIN FRONT-MOUNT (Method A) Choose the mounting location where the unit will not interfere with the normal driving function of the driver . Installation Opening This unit can be installed in any dashboard having an opening as show below: Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. 53 mm 182 mm Use only the parts included with the unit to ensure proper installation.
INSTALLATION Dashboard Removing the unit 1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal. 2. Remove the metal strap attached the back of the unit (if attached). 3. Lift the top of the outer trim ring then pull it out to remove it. 4. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard. Tabs Screwdriver Sleeve 6.
INSTALLATION 3 DIN FRONT-MOUNT (Method B) 1 1. 2. 3. 4. Factory radio mounting bracket Car radio mounting bracket Screw After aligning the car radio mounting bracket with the factory radio mounting bracket, tighten the screws (5x5mm) at 2 places on each side. 5. When fix factory radio mounting bracket with the screws, use a standard-tipped screwdriver to bend open the tabs of the car radio mounting bracket to make them fit into the holes in the factory radio mounting bracket.
THE PLAYER FRONT VIEW 6 1 3 4 2 5 When the monitor stretching out: 11 1. 2. POWER Remote sensor (on the front panel) 3. 4. 5. 6. OPEN/CLOSE (EJECT) Disc Slot Reset Button 8 9 9 7 10 7. 8. 9. 10. PICTURE VOLUME VOLUME + Remote sensor (on the monitor panel) 11. 6.
THE PLAYER BACK VIEW 12 12. 13. 14. 15. 13 14 15 16 AUDIO/VIDEO INPUT 1 RGB SYSTEM REMOTE SOCKET AUDIO/ VIDEO INPUT 2 17 18 16. DIGITAL AUDIO 17. AUDIO/ VIDEO OUTPUT 18.
3A MEMORY BACK-UP (YELLOW) GND (BLACK) RED AUDIO/VIDEO INPUT 1 ACC (RED) AUDIO R OUT WHITE DIGITAL AUDIO AUDIO L OUT YELLOW (OPTIONAL) (OPTIONAL) AUDIO/VIDEO INPUT 2 VIDEO OUT RED REMOTE CONTROL RECEIVER (OPTIONAL) RGB SYSTEM DIGITAL AUDIO AUDIO 2 R IN WHITE YELLOW RED WHITE YELLOW REMOTE AUDIO 2 L IN VIDEO 2 IN AUDIO 1 R IN AUDIO 1 L IN VIDEO 1 IN ELECTRICAL CONNECTION AUDIO/VIDEO OUTPUT DC 12V IN
REMOTE CONTROL LOCATION AND FUNCTION OF KEYS 8 9 4 5 1 2 3 6 7 10 11 12 14 13 15 16 19 17 20 18 21 24 23 22 25 26 29 30 28 27 32 31 12
REMOTE CONTROL 1. 2. 3. 4. POWER EJECT OPEN/CLOSE SUBTITLE 5. 6. 7. 8. 9. 10. ANGLE DISPLAY MODE SETUP PAL/NTSC AUDIO 11. TITLE 12. MENU 13. / , / 14. ENTER 15. 16. 17. 18. / / / 19. 20. 21. 0 - 9 22. 10+ 23. CLEAR 24. VOLUME+/25. ZOOM 26. PANEL+ 27. GOTO 28. PBC 29. PROGRAM 30. PANEL31. REPEAT 32. A-B Press POWER to turn the unit ON or OFF. Press to eject the disc. Press to open/close the monitor . Changing of the SUBTITLE language on multi-subtitle language DVD disc.
REMOTE CONTROL Preparing the Remote Control Inserting the Batteries 1. Open the battery compartment cover. 2. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented as indicated. 3. Close the cover Battery: Two AAA size battery. Using the Remote Control Point the remote contr ol towards the remote control signal receiver on the player front face. Operation angle: About 30 degree in each the direction of the front of the remote sensor.
LOADING/EJECTING A DISC Loading a Disc 1. Turn the ignition on the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically. 1 3 2 Ejecting a Disc Press disc.
OPERATION Don't rotate the monitor forcibly to avoid mechanical damage. BASIC OPERATION Turnig the player on/off Press the POWER button on the front panel or (POWER) button on the remote control to turn the player on or off. Open/Close the Monitor and Angle Adjustment Press OPEN/CLOSE button on the front panel or point the remote control to the remote sensor on the front panel and press OPEN/CLOSE button on the remote control, the monitor will stretch automatically . Fig.
OPERATION a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. - Error symbol on the display. Remote Sensor There is a remote sensor on the front panel. On the monitor, there is another remote sensor to receive remote control signal.
OPERATION DISC (DVD, VCD, CD, MP3) OPERATION Pause (still picture) Pressing on the remote control during playback will stop play temporary . To return to normal playback, press on the remote control . Switching to DVD mode press MODE button on remote to select DVD mode. Repeat Function Stopping Play - Briefly press the (Stop) button to stop the unit playback, when the (Play) button is pressed, normal playback will continue.
OPERATION same as described above. If you want to complete program setting, press (Stop) button first then press button to play tracks in programmed order. In stop mode press PROGRAM button to exit program mode and "PROGRAM OFF" appears. If you set WITH MENU in SMART NAV item in PREFERENCES PAGE, you can use / , / buttons to select PROGRAM PXXX mode or track number and press ENTER button to confirm it.
OPERATION (5) Press DISPLAY for the fifth time: The message on the screen will be cleared.
OPERATION - Some discs only contain one subtitle language. - When no different subtitle language are recorded, will be displayed at screen left top corner. Multi-audio Language Function For DVD: Press AUDIO on the remote control during playback. Each time the button is pressed, the audio soundtrack language changes on sequential order. Notes: - The language number is different according to the disc. - Some disc only contain one language soundtrack.
OPERATION Smart navigation MP3 Disc Play RGB OPERATION MP3 disc is playing as the format of FOLDER. For example: Switching to RGB mode When you connect the RGB terminals on the back of the DVD unit to the corresponding RGB system, then Press MODE button on remote control to select RGB mode, the RGB signal will appear on the screen. Note: When you press MODE button to select RGB mode and there hasn't any RGB signal input, then there is nothing to display on the screen.
SETUP INITIAL SETUP GENERAL SETUP SETUP MENU --- MAIN PAGE --- GENERAL PAGE --- GENERAL SETUP TV DISPLAY NORMAL / PS SPEAKER SETUP PIC MODE NORMAL / LB AUDIO SETUP ANGLE MARK WIDE PREFERENCES OSD LANG CAPTIONS SCR SAVER EXIT SETUP 1. Press SETUP on the remote control in the STOP mode. (Press the button twice to ensure that the player is in STOP mode.) MAIN PAGE TV Screen 4:3 Video Material 2. The initial SETUP menu is displayed. Normal Pan Scan Wide (16:9) Letter-box 4:3 3.
SETUP --- GENERAL PAGE --- --- GENERAL PAGE --TV DISPLAY TV DISPLAY PIC MODE AUTO PIC MODE ANGLE MARK HI-RES ANGLE MARK OSD LANG N-FLICKER OSD LANG ENGLISH CAPTIONS CAPTIONS FRENCH SCR SAVER SCR SAVER GERMAN SPANISH MAIN PAGE MAIN PAGE OSD LANG type setup Select the preferred OSD (On Screen Display) language by using the / buttons. PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution.
SETUP --- GENERAL PAGE --- AUDIO SETUP --- AUDIO SETUP --- TY DISPLAY PIC MODE AUDIO OUT ANALOG ANGLE MARK OP MODE SPDIF/RAW OSD LANG DYNAMIC SPDIF/PCM CAPTIONS LPCM OUTPUT SCR SAVER ON OFF MAIN PAGE MAIN PAGE AUDIO OUT - Select ANALOG mode to activate analog audio output. - Select SPDIF/RAW mode to activate raw digital audio output. And the digital audio format depends on the disc record format. - Select SPDIF/PCM mode to activate PCM digital audio output.
SETUP --- AUDIO SETUP --- PREFERENCES SETUP --- PREFERENCES PAGE --- AUDIO OUT TV TYPE AUTO 6/8 AUDIO NTSC 4/8 SUBTITLE PAL 2/8 DISC MENU OFF PARENTAL OP MODE FULL DYNAMIC LPCM OUTPUT PASSWORD DEFAULTS SMART NAV MAIN PAGE MAIN PAGE Dynamic Range Control Select DYNAMIC and adjust the dynamic range of a Dobly Digital encoded program. There are 8 steps between full compression and off compression. TV type setup This player can play discs recorded in either NTSC format.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE TV TYPE 1G AUDIO ENGLISH AUDIO 2 SUBTITLE FRENCH SUBTITLE 3 PG DISC MENU SPANISH DISC MENU 4 PG 13 PARENTAL CHINESE PARENTAL 5 PASSWORD JAPANESE PASSWORD 6 PG-R DEFAULTS GERMAN DEFAULTS 7 NC-17 SMART NAV OFF SMART NAV 8 ADULT MAIN PAGE NO_ PARENTAL MAIN PAGE SUBTITLE language setup Select the preferred SUBTITLE language by using the cursor buttons.
SETUP --- PREFERENCES PAGE --- --- PREFERENCES PAGE --- TV TYPE TV TYPE AUDIO AUDIO SUBTITLE SUBTITLE DISC MENU DISC MENU PARENTAL PARENTAL PASSWORD PASSWORD DEFAULTS NO MENU SMART NAV SMART NAV WITH MENU MAIN PAGE MAIN PAGE DEFAULTS RESET DEFAULTS Select reset to revert to factory initial settings. SMART NAV If select WITH MENU mode, when play a MP3 disc, the smart navigation menu will appear on the screen, then the user can select a track to play according to the menu hint.
SETUP DEFAULTS TABLE General Setup TV Display Normal/LB PIC Mode AUTO Angle Mark ON OSD Language English Captions ON SCR Saver ON Speaker Setup Downmix Stereo Audio Setup Audio Out SPDIF/RAW OP Mode Line Out Dynamic FULL LPCM Output LPCM 96K TV Type AUTO Audio English Subtitle English DISC Menu English Parental NO_Parental Password 3308 Smart NAV With Menu Preferences 29
TROUBLE SHOOTING If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. NO COLOR IN PICTURE The disc format is not according to the TV-set used (NTSC). Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. DISC DOES NOT PLAY Ensure the disc label is upwards. Clean the disc.
TROUBLE SHOOTING Check if the audio format of the selected audio language matches your receiver's capabilities. BUTTONS DO NOT WORK Turn the player off and on with the power on/off button on the front of the player. Press Reset button on the front of the DVD unit.
SPECIFICATIONS DVD Supply voltage Current consumption Signal system Discs played Audio output level Audio signal output characteristics Monitor Scr een Size Resolution : : : : 12V DC (11V-15V), test voltage 14.4V, negative ground Less than 2A Compositive video 1.0Vp-p 75 (1) DVD-VIDEO disc 5" (12 cm) single-sided, single-layer 5" (12 cm) single-sided, double-layer (2) Compact disc (CD-DA/CD-R/CD-RW/MP3) (3) 5" (12 cm) Video CD : 10k (2 ch 2.
www.pyleaudio.
