user’s manual 7-BAND equalizer.
congratulations... for choosing Pyle Audio, and congratulations on joining a select group of dedicated enthusiasts committed to the very best in mobile sound performance and dependability. You are now the proud owner of one of the world’s most sophisticated electronics components. This Pyle product is the result of an extensive engineering program with the sole purpose of creating the finest mobile audio experience imaginable.
table of contents table of contents 1 general features PLE702B PLE755S 2 3 features and controls PLE702B PLE755S 4-5 6-7 electrical connections PLE702B/PLE755S 8 mounting and installation 9 system wiring PLE702B PLE755S 10 11-12 precautions and troubleshooting 13 PLE755S
general features PLE702B 7-Band Equalizer/Amplifier with Subwoofer Crossover and Bass Boost · 7-Band Graphic Equalizer · Built-In 4 Channel Amplifier 2 · Pre-Amp Input via RCA Jacks · Output Level Control · LED Power Level Meter · 0 - +18dB Bass Boost Control · 12 dB Boost/Cut per Frequency Band · Subwoofer RCA Outputs · Rotary Front-Rear Fader Control · Remote Power On/Off · Independent Subwoofer Crossover · High Impedance RCA Inputs · Half-DIN Size Cabinet
general features PLE755s 7-Band Equalizer with Subwoofer Crossover and Bass Boost · 7-Band Graphic Equalizer · Pre-Amp Input via RCA Jacks · Output Level Control · LED Power Level Meter · 0 - +18dB Bass Boost Control · 12 dB Boost/Cut per Frequency Band · Front, Rear and Subwoofer RCA Outputs · Rotary Front-Rear Fader Control · Remote Power On/Off · Independent Subwoofer Crossover · High Impedance RCA Inputs · Half-DIN Size Cabinet 3
features and controls power indicator LED front LEFT Output Level RIGHT Output Level POWER LED level display max PLE702B fader front 40 freq 400 0 level +18dB rear series Vol 65Hz 150Hz 400Hz 1.4KHz 2.
features and specifications PLE702B 7-Band Equalizer/Amplifier with Subwoofer Crossover and Bass Boost LED level display these rows of LEDs display the Amplifier Output Levels. Left and right channels are displayed independently at peak levels. center frequencies power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on.
features and controls power indicator LED front LEFT Output Level RIGHT Output Level POWER LED level display max PLE755S fader front 40 freq 400 0 level +18dB rear series Vol 65Hz 150Hz 400Hz 1.4KHz 2.
features and specifications PLE755S 7-Band Equalizer with Subwoofer Crossover and Bass Boost LED level display these rows of LEDs display the Preamp Output Levels. Left and right channels are displayed independently at peak levels. power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on.
electrical connections P L E 7 0 2 B• P L E 7 5 5 S rear OUTPUT INPUT SUB LINE PLE702B RED WIRE Fuse 6A BLACK WIRE Fuse 0.5A rear 12V battery OUTPUT SUB PLE755S Fuse 1A REAR head unit INPUT FRONT LINE RED WIRE BLACK WIRE Fuse 0.
mounting and installation P L E 7 0 2 B• P L E 7 5 5 S mounting Please take the time to install your new Pyle Signal Processor securely, according to this diagram, using the hardware provided. 4 x 6 mm machine screw (4) This Half-DIN size unit can also be installed in the dash adjacent to the head unit, provided that there is a slot available.
system wiring PLE702B left and right line outputs from head unit Basic system application using built-in amp and external subwoofer amp left and right line inputs PLE702B OUTPUT INPUT SUB LINE L R L head unit (stereo, CD player, tape deck, etc.
system wiring PLE755S left and right line outputs from head unit Basic system application using front, rear, and subwoofer amps left and right line inputs PLE755s OUTPUT SUB L INPUT REAR R L head unit (stereo, CD player, tape deck, etc.
system wiring PLE755S left and right line outputs from head unit Basic system application using a 4 channel amp and subwoofer amp left and right line inputs PLE755s OUTPUT SUB L INPUT REAR R L FRONT R head unit (stereo, CD player, tape deck, etc.
precautions • Never drive with the volume raised so high you cannot hear what is occuring in traffic around you. • Be aware that repeated exposure to excessive volume levels can permanently damage your hearing! • Keep all electronics away from moisture, dust, extreme heat or extreme vibrations. • Pyle Audio products are capable of sound pressure levels in excess of 150 dB. Continuous exposure to sound pressure levels over 100 dB may cause permanent loss of hearing. Use common sense and PRACTICE SAFE SOUND.
limited warranty policy a m p l i f i e r s All Pyle products are carefully constructed and thoroughly tested before shipment. Products purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchase. Should the product fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of Pyle.
