OWNER’S MANUAL DIGITAL AUDIO OUT MULTI-SUBTITLE LANGUAGES FUNCTION ELECTRONIC SHOCKPROOF (ESP) FUNCTION A/V INPUT FM MODULATOR TV TUNER REMOTE CONTROL
Page User’s Manual - page 1 CONTENTS 1 Contents 2 Safety Information 3 Installation 5 Electric Connection 6 Operation 8 Using The Remote Control 9 General Operation 10 CD/MP3 Operation 11 DVD/VCD Operation 15 Data Disc Play Operation 16 Memory Card Play Operation 16 USB Device Operation 16 AV In Operation 16 FM Modulator Operation 17 TV Operation 17 Additional Information 18 Setup 18 System Setup 20 Language Setup 20 Audio Setup 20 Digital Setup 21 Specification
Safety Information CAUTION: This mobile DVD player is a class 1 laser product. However this mobile DVD player uses a visible/invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open covers and do not repair yourself. Refer servicing to qualified personnel.
Label side up Installation Notes: Do not touch the underside of the disc - Choose the mounting location where the unit will not distract the driver. - Before the installing of the unit, connect the wiring temporarily and make sure it is all Do not bend connected up properly and the unit and the system works. - Use only the parts included with the unit to Wipe the disc from center toward the outside edge ensure proper installation. The use of unauthorized parts can cause malfunctions.
The unit is designed for home-use and car-use. When installed on the car, please follow the installation instruction below. Notes: 1. First remove the two screws that lock the DVD mechanism, then attach the brackets on both sides of unit with screws (m4X5), last install the unit with screws (m5X25). 2. When fix the unit, you can slide the screw (m5X25) to left side or right side to meet your needed position. In the figure above, select two holes among position that marked 1, 2, 3 and 4 to fix the bracket.
ELECTRIC CONNECTION METHOD A Use the conversion cable to obtain DC 12V power supply input through the AC/DC ADAPTER or the cigarette lighter according to the illustrator as follows: METHOD B According to the illustrator below, install the unit in the car and obtain DC 12V power supply input.
OPERATION LOCATION AND FUNCTION OF KEYS Front panel Remote Control User’s Manual - page 6
1. POWER Press it to turn the unit on/off. 2. Pause playback a disc, press it again to resume playback. 3 . MODE Change between DVD, TV and AV mode. 4. Press the button to skip back one track. 5. Press the button to skip to the next track. 6. EJECT Press it to eject the disc from the disc slot (7). 7. DISC Slot Gently insert a disc with the printed side uppermost into the disc slot (7) until you feel some resistance. 8.
USING THE REMOTE CONTROL Preparing and Using The Remote Control * Before using the remote control, please take the transparent insulator strip off the bottom of remote control. * Point the remote control at the remote sensor (11) from no more than 6 feet away. * If the IR sensor is exposed to direct sunlight, the remote control may not be able to communicate with it properly. You may need to relocate or shield the IR sensor.
GENERAL OPERATION Initial System Start-Up Be sure to press the RESET button ( 12) When using the unit for the first time, after all connections are completed correctly. 1. Turn off the unit power. 2. Press RESET with a ballpoint pen or similar pointed object. Turning Power On and Off Press button (1) or insert a disc to turn on the unit. When system is on, press button (1) to turn off the unit. Loading/Removing a Disc 1. Insert the disc into the disc slot (7) with the printed side facing up.
CD/MP3 Operation Playback 1. Insert a disc with the label side facing up. The disc will be drawn into the player automatically. The information for the current disc will be shown on the screen . 2. For CD: Pause Playback Press button (2) to pause playback. Press it again to resume playback. Stopping playback - Briefly press the < button (31) to stop the playback . W hen the < button is pressed and then press button ( 20), normal playback will resume.
Note: REP 1: Only a track (file) is played repeatedly. REP DIR: Only tracks (files) in a folder are repeatedly playing. REP ALL: An entire disc is played repeatedly. REP OFF: The mode returns to normal playback. - Paragraph Repeat Play: A-B repeat allows a selected passage to be repeat continuously. Press A-B button (14) at the start of the desired passage. Press A-B button (14) at the end of the passage. Then the unit will repeat playing the passage you just set from A to B.
Fast-Forward / Fast-Reverse 1. Fast-forward Press 8 button (28) during playback. Each time the button is pressed, the speed of fast-forward increases as follows: FORWARD 2X Æ 4X Æ 8X Æ 20X In fast-forward mode, press button (2) to return to normal playback. 2. Fast-Reverse Press 7 button (29) during playback. Each time the button is pressed, the speed of fast-reverse increases as follows: BACKWARD 2X Æ 4X Æ 8X Æ 20X In fast-reverse mode, press to return to normal playback.
2. Waiting for a moment for the player locate the track. Playback starts from the selected chapter or track. * This function is only available for discs on which chapter numbers are recorded. Playing In Random Order Press RDM button (33) to switch the random mode on/off. If the random mode is on, tracks (files) on the disc will be played in a random order. On Screen Display Function Press the DISP button (13) on the remote control during playback to display onscreen information about the current disc.
Press the SUB-T button (23) during playback. The following information will be shown on the screen. Each time you press the button, the subtitle cycles between the different languages recorded on the disc. Notes: - Not all discs will allow changing the subtitle during playback. In these cases, select subtitle from the DVD’s menu. - There may be a delay before the selected subtitle appears. - For some discs, the subtitles will be displayed even when this is set to off.
Use , cursor button to select the item that you want to program. 1) The item you selected will become highlighted. 2) Input the track number that you want to program by numeric buttons (0~9) on the remote control. 3) Press , cursor buttons to move to “PLAY” operation button and then press ENTER button (18) to program the playback. - In DVD/MP3 playback mode, press PROG button (32) to activate program edit interface as follow: Use , cursor button to select the item that you want to program.
Memory Card Play Operation This disc player offers you a memory card slot (10). Using the SD/MMC card: When you insert a SD/MMC card into the Memory card slot (10), the DVD player will read the SD/MMC card automatically. The unit gives first priority to the card in the slot. If you insert a disc into the disc slot (7) while reading the SD/MMC card, the unit will play the disc. Press (31) button to enter into PRE-STOP mode, then press GOTO button (30) to switch back to the reading card mode.
2) In DVD mode, press MENU button continually, you can adjust the FM frequency between 87.7-88.9MHz (adjustment unit is 0.2 MHz/step). 3) To tune radio to the corresponding frequency, you can listen to the audio of the DVD player by radio equipment. TV Operation Press MODE to switch to TV mode. In TV mode, the function of the buttons served in DVD mode is locked. Searching Channels Pressing MENU button will enter into automatically searching state.
About MP3 Setup What is MP3? In DVD mode, when the disc is playing or in stop mode, press SETUP button (19) to enter setup menu. 1. When the cursor is in the upper part of the menu, use buttons to move between the different pages. 2. Press button to move the cursor to the setup page below. Then you can use the buttons to move between the different setup options. 3. Press or ENTER button to move to the choice list of each setup option , and then use buttons and ENTER button (18) to change your selection.
You can either choose AUTO SELECT, which will sense the type of monitor attached to the output and select NTSC or PAL as needed. If you know the type of monitor, you should choose the type in this menu rather than letting AUTO SELECT do it for you. This is because there may be an undesirable small delay and some flickering of the screen during the AUTO-SELECT process. SCREEN SAVER As with computer monitor, video screens can “burn in” if a still image is displayed too long on the screen.
3) Press or button to select “ RATING ” then press ENTER button. The restriction level ( parental level ) input display appears . 4) Press / button to select the restriction level (1 to 8), and then press ENTER button. SUBTITLE LANG: ENGLISH/GERMAN/SPANISH/FRENCH/PORTU GUESE/ITALIAN/RUSSIAN/POLISH MENU LANG: ENGLISH/GERMAN/SPANISH/FRENCH/PORTU GUESE/ITALIAN/RUSSIAN/POLISH Audio Setup 5) When the setting is complete, press SETUP button to return to normal mode.
Specification Trouble Shooting 1. Supply voltage: Power Supply Requirements 12V DC (11~15V), test voltage 14.4V, negative ground If it appears that your DVD unit is faulty, please first consult this checklist. It may be that something simple has been overlooked. Current consumption: Less than 2 A Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player. 2.
No Sound Check the audio connections. The Player Does Not Respond To the Remote Control Aim the remote control directly at the sensor on the front of the player. Remove any obstacles which may interfere with the signal path. Inspect or replace the remote control battery. Distorted or B/W Picture The disc format is not according to the TV-set used (PAL/NTSC). No Audio at Digital Output Check the digital connections Check the Digital Audio menu to make sure that the digital output is correctly set.
