20" CEILING MOUNT TFT-LCD MONITOR WITH TV TUNER SYSTEM & IR HEADPHONE PLVW20T
Table of Contents 1. Table of Contents------------------------------------------------------ 1 2. Warning ---------------------------------------------------------------- 1 3. Usage Notice ---------------------------------------------------------- 2 4. Package ---------------------------------------------------------------- 3 5. Function Descriptions --------------------------------- -- ------------- - 4 6. Start Your Installation ------------------------------------------------- 4 7.
Usage Notice Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your LCD monitor To avoid the damage of the LCD monitor and risk of electronic shock, do not allow the LCD monitor to get wet. If the monitor gets wet, turn off the power, unplug the power cord and send the LCD monitor to your local dealer or our service cen-ter as soon as possible. Use a regular power specification of DC 12V . Do not use any other power supply with different voltage.
Package This LCD monitor comes with all the items below. Check to make sure your unit complete. Contact your dealer immediately if anything is missing.
Function Descriptions * Power: You may also turn the monitor on and off with the "Power" button. * Menu: Press the "MENU" button to pop up the OSD menus. * / * Mute: Keys: 1. Press the " / " key to increase or decrease volume. 2. Make item selection in OSD menus to increase or decrease parameters as well. Press the "Mute" button from the remote control to turn off the sound of the LCD monitor.
Setting Up The Dome Lamps *Operating the dome Lamps 1. There are three function buttons for the Dome lamps operation: OFF, DOOR, and ON. (Refer to the following figure) A. OFF: To turn off the lamps. B. DOOR: To make the lamps turn on only when car doors are opened. C. ON: To turn on the lamps.
Installation your Monitor Take care to select a suitable installation location and secur method fastening for the monitor: *The unit should not distract or obstruct the driver. *The installation should not inhibit the entry to, or the exit from the vehicle. *The unit should not interfere with other vehicle components e.g., (sliding sunroof). *Make sure the unit is installed to a secure, mounting location and cannot become dislodged in the event of an emergency stop.
Operating the Monitor * Powering up the monitor The monitor will be automatically turned on when releasing the monitor from the base unit and "OFF" when it is closed. Operating Instructions Opening the Monitor 1. Press the monitor release button to lower the LCD screen. 2. Lower the monitor until is at the proper viewing angle. (Refer to the following figure.) Closing Monitor 1. Return the monitor to the central viewing position. (Refer to the following figure) 2.
* OSD Menus in A/V Source A. Source Selection Menu SOURCE MAIN MENU AUTO DETECT CUBS.1 = NTSC H. SYNC = +15.7K Hz V. SYNC = +60.0Hz 1 2 BRIGHTNESS CONTRAST COLOR HUE SOURCE AUDIO RECALL VIDEO 1 VIDEO 2 RETURN B. Audio Input Selection Menu AUDIO EXIT MUTE VOLUME RECALL RETURN * Quick Adjustment OSD Menus 1. By pressing "MENU" button, you may open the MAIN MENU, using " " or " " buttons to pick out OSD functions. 2.
Remote Control TV/CATV TV/AV MUTE POWER Power MUTE 1 2 3 4 5 6 7 8 9 0 FM/AM SETUP Monitor UP + VOL FUNCTION / OSD MENU UP MODE VIDEO 1 / VIDEO 2 DOWN FUNC CH DN - MODE Appendix Changing the New Battery in Remote Control 1. Push the battery case button to wards the right. (As shown # 1 in below figure) 2. Pull the battery case away from the remote control. As shown # 2 in below figure) Change a new battery.
Specifications 1. Type Roof Mount Color Display Monitor 2. Signal Input Sync. : Separate TTL sync. Video : Composite sync. System : NTSC M,N PAL SECAM Audio : 1.0Vp-p 3. Display System Active Matrix High Resolution TFT-LCD Monitor 4.
TV TUNER BOX System features and controls: Remote control functions TV/CATV TV/CATV interchange TV/AV TV/AV MUTE 1 2 3 4 5 6 7 8 9 0 FM/AM Channels convertible(CH) POWER SETUP Power MUTE Number Pad SETUP Monitor UP + VOL FUNC CH DN Volume control buttons (Useless with Main Monitor) - MODE TV01 11 Monitor (Useless with DVD Player)
Tuner Installation and electrical connections 1. Find a suitable location for the tuner unit and mount it securely in place. Be sure to place it in an area away from moisture and dirt, and where incoming cables will not be walked on or pulled accidentally. 2. Make all required audio, video and power connections to the appropriate connectors on the tuner as indicated in the drawing below to suit your system installation.
Operating your system in a safe and legal manner When operating a motor vehicle, it should always be your highest priority to maintain safe driving habits. It is illegal in many areas of the country to drive with the TV or monitor turned on, when it is visible to the driver. Please check your local and state laws governing the use of Mobile Entertainment systems in your use area.
Powering up the system TV/AV MUTE POWER 1 2 3 4 5 6 7 8 9 0 FM/AM SETUP TV/CATV 1. Press and hole the POWER On/Off button on the remote until the green LED on the front of the monitor is illuminated. The On Screen Display will show the position of the system at the time it was last turned off (for example, if you were watching CATV Channel 38 when you last turned the power off, the system will display "CATV CH 38").
Adjusting the sound TV/AV MUTE POWER 1 2 3 4 5 6 7 8 9 0 FM/AM TV/CATV The tuner system permits you to adjust many viewing parameters easily. These are: Audio Mute: Pressing the MUTE button will disable the audio .output, and will display "MUTE" on the upper right corner of the monitor screen. To cancel the muting function, press MUTE again.
Specifications 1. Signal system NTSC 2. Audio/Video Inputs Audio R/L x2, Video x 2 3. Audio/Video Outputs Audio R/L x2, Video x 1 4. FM Modulator 20 Channels: FM 88.1 MHz to FM 91.9 MHz By channel step 0.2 MHz 5.