PM725 Universal Remote
Table of Contents Introduction Introduction ...................................................... 3 Setup ............................................................... 4 Battery Installation ....................................... 4 Battery Saver ............................................... 4 Code Saver ................................................. 4 Power-On default ........................................ 5 TV Punch Through ....................................... 5 VCR Punch Through ..........
Setup Battery Installation Power-On Default 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. The remote powers on in TV mode.
Button Functions, cont. Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev. Ch. may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must be equipped with Prev. Ch. ability for the Prev. Ch. button to operate this feature.
Advanced Button Functions DVD TV/VCR Punch-Through Scan+ and Scan- buttons control the speed of Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Subtitle button brings up DVD Subtitle Menu for Subtitle selection and display. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.
Code Entry Direct Code Entry Programming with Code Search 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL Up.
Sleep Timer Code Identification Code Identification 1. Press and hold Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the Code Search button. The indicator light blinks off. 4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn.
Code Learning, cont. Code Learning, cont. Learning Commands To Clear all Learned Commands under a mode 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.). The indicator lights blinks off once. 3. Press the Learn button. 4. Press the button on the Learning Remote that you want to teach, e.g. Power. 5. Point both remotes at each other (see tips on page 11).
Code List FISHER ....... 506 606 619 FUJITSU ............................ FUNAI ................ 206 805 FUTURETEC ............ 805 GE ........ 002 006 007 018 ..... 114 310 312 502 601 ..... 719 803 806 810 901 GIBRALTER .............. 002 GOLDSTAR 002 102 117 ............. 217 307 502 818 GRUNDY .................... 206 HALLMARK ............. 002 HARVARD ......................... HITACHI .... 002 016 116 ..................... 315 502 507 ..................... 519 607 615 .............
CANNON ... 130 226 535 635 CAPEHART ............... 135 534 CARVER ............................ 330 CCE ............................. 230 826 CITIZEN .... 025 026 425 525 ..................... 625 725 825 826 COLORTYME .................. 025 COLT ................................. 230 CRAIG ......... 230 425 426 525 CURTIS-MATHES ........... 025 ..................... 124 130 226 324 ..................... 425 526 635 725 CYBERNEX ...................... 425 DAEWOO .. 026 135 625 626 .....................
SAT CD AMPLICA ......................... 159 CHANNEL MASTER ...... 359 ..................................... 459 559 CHAPPARAL .... 657 659 757 CHEYENNE ..................... 757 DRAKE ............... 059 360 857 DISH NETWORK ..... 366 460 ..................... 464 560 660 962 DX ANTENNA ......... 458 859 ECHOSPHERE ................. 464 ECHOSTAR ........ 366 460 464 ............................. 560 660 962 EXPRESSVU ..................... 464 FUJITSU ..................... 760 860 GE .....................
Product Operation Troubleshooting After the batteries are installed and you have programmed the remote for the codes that operate your products, you can use your remote to operate a TV, VCR, Cable Box, CD Player, or Satellite System, etc. Remote does not operate your product. • • • • Press the mode button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.
90 Day Warranty This product is manufactured to PHILIPS MAGNAVOX specifications and is free from defects in material, workmanship and assembly. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions within 90 days from the date of purchase, PHILIPS MAGNAVOX will provide a comparable replacement free of charge within the warranty period, to the original purchaser.
