USER’S MANUAL PPHP1291 PPHP1294A PPHP1299AI PPHP1591 PPHP1594A PPHP1599AI www.pyleaudio.
Before using your new Speaker System Please review the following instructions, for the safety and investment. INSTRUCTIONS Before connecting the speaker, make sure the system is off and the controls on the minimum level. On the contrary the system could damage 1. - Plug the power cable to the AC outlet and to the system and to the speaker 2. - Plug the Microphone in the “MIC” input 3.- Connect (CD, DECK, MP3, DVD, etc) on “LINE IN” input 4.- Turn on the systems.
FEATURES: PPHP1291: 12” 1000 Watt 2 Way Plastic Molded Speaker Cabinet • 12'' Woofer • 1.4'' Titanium Compression Driver • 1/4” and Speakon Jacks input • Frequency response: 50-20 KHz • Power :1000 Watts • Impedance: 8 ohm • Crossover Frequency: 3.5K Hz • 35mm Speaker Stand Mount • Dimensions: W15.6” x D12” x H 23.3” PPHP1294A: 12” 1000 Watt Powered 2 Way Plastic Molded Speaker Cabinet • 12" Woofer • 1.
• Power Output: 1000 Watts • Crossover Frequency: 3.5K Hz • 35mm Speaker Stand Mount • 90-240V AC • Dimensions: W15.6” x D12” x H 23.3” PPHP1591: 15” 1600 Watt 2 Way Plastic Molded Speaker Cabinet • 15'' Woofer • 1.75'' Titanium Compression Driver • 1/4'' and Speakon Jacks input • Frequency response: 40-22 KHz • Power : 1600 Watts • Impedance: 8 ohm • Crossover Frequency: 3.5K Hz • 35mm Speaker Stand Mount • Dimensions: W18.2” x D14.
• IPOD DOCK • XLR and 1/4" Mic Inputs • XLR Stereo RCA Line Input • XLR and 1/4" Line Outputs • Master Volume, Bass Treble Controls • Frequency response: 40-22 KHz • Power Output: 1600 Watts • Crossover Frequency: 3.5K Hz • 35mm Speaker Stand Mount • 90-240V AC • Dimensions: W18.2” x D14.
Use it to set the treble level 6) Bass Use it to set the bass level 7a) Signal output Use this jack to connect other amplifier or even another powered speaker cabinet in cascade, using a 6,3mm connector 7b) Signal output Use this jack to connect other amplifier or even another powered speaker cabinet in cascade, using a Cannon connector 8) AC 110/220 Voltage Selectable 9) AC power Use it to connect the AC power cord 10) On/ Off power switch Press to power on /off the speaker box 11a) Button Use it to On/Off
PPHP1294A/PPHP1594ABACK VIEW PPHP1291/PPHP1591 BACK VIEW PPHP1299AI BACK VIEW PPHP1599AI BACK VIEW 6
Electrical Safety All products are fitted with a detachable power cord (supplied) which connects to the AC Mains and the back panel of the loudspeaker. The power cord has an IEC female connector on One end and a male mains connector on the other end. This cord is supplied specifically to Accommodate the different worldwide safety and electrical code requirements. The power cord Supplied with your product has a 3-pin type plug. Do not cut off or damage the grounding Plug.