User's Manual

Owner’s Manual
PT2000 Amplifier
PYE PRO AMPLIFIERS
warranty registration card
Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name Address City, State ZIP
Model No. Serial #
(if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer Mail Order
Other
Please complete warranty card, detach and return
All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at [phone] to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing
with the product
• Include in your letter your return address, daytime phone
number and R.A. number
• Also include a check or money order for $15.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.
Limited Warranty
Amplifier Specifications
Input Impedance
Continuous Output Power
Stereo Mode
20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 4 Ohms
Bridged Mode
20 Hz to 20 kHz, 8 Ohms
1 kHz, 4 Ohms
Maximum Power, 4 Ohms
THD at rated output power
Frequency Response +/–3dB
Input Sensitivity for rated output power
Signal-to-Noise Ratio A-Weighted
Speaker Impedance
A or B only
A plus B
Bridged Mode
Power Requirement
Power Fuse
Dimensions
HxWxD,inches
(mm)
Weight, lbs (kg)
20 k-Ohms
120W x 2
175W x 2
1000W x 2
300W x 1
350W x 1
2000W x 1
0.1%
10 Hz to 50 kHz
0.775V
90 dB
4-16 Ohms
8-16 Ohms
8-16 Ohms
120 VAC, 60 Hz
7A/250V
5
1/8 x19x12
(130 x 482 x 305)
28.19 (12.8)
20 k-Ohms
100W x 2
140W x 2
800W x 2
250W x 1
280W x 1
1600W x 1
0.1%
10 Hz to 50 kHz
0.775V
90 dB
4-16 Ohms
8-16 Ohms
8-16 Ohms
120 VAC, 60 Hz
6A/250V
4 15/32 x187/8 x12
(114 x 480 x 305)
24.67 (11.2)
20 k-Ohms
70Wx2
100W x 2
600W x 2
150W x 1
200W x 1
1200W x 1
0.1%
10 Hz to 50 kHz
0.775V
90 dB
4-16 Ohms
8-16 Ohms
8-16 Ohms
120 VAC, 60 Hz
5A/250V
4 3/16 x1815/16 x103/4
(100 x 482 x 273)
19.82 (9.0)
PT2000 PT1600 PT1200
PT1600 Amplifier
PT1200 Amplifier