Impact Driver User Manual

ManualsBrandsPYLE Audio ManualsImpact DriverPT501

Part No. D22725-028-4

IMPORTANT

Please make certain that the person who is

to use this equipment carefully reads and

understands these instructions before

starting operations.

1/2” Impact Wrench

Herramienta

neumática de impacto,

de 1/2"

IMPORTANT

Veuillez vous assurer que la personne qui

utilise cet outil lit attentivement et comprend

ces instructions avant de commencer à utiliser

l'outil.

Clé à chocs de 1/2 po

IMPORTANTE

Asegúrese de que la persona que va a usar esta

herramienta lea cuidadosamente y comprenda

estas instrucciones antes de empezar a

operarla.

ESPAÑOL: PÁGINA 9

FRANÇAIS: PAGE 17

Instruction manual

Manual de

Instrucciones

Manuel d'instructions

MODEL PT501

MODÈLE PT501

MODELO PT501

To learn more about Porter-Cable visit

our website at:

http://www.porter-cable.com

Pour de plus amples renseignements

concernant Porter-Cable, consultez

notre site Web à l'adresse suivante:

http://www.porter-cable.com

Para obtener más información sobre

Porter-Cable, visite nuestro sitio web en:

http://www.porter-cable.com

Summary of content (8 pages)

PAGE 1
Instruction manual Manual de Instrucciones Manuel d'instructions ESPAÑOL: PÁGINA 9 FRANÇAIS: PAGE 17 1/2” Impact Wrench Herramienta neumática de impacto, de 1/2" Clé à chocs de 1/2 po MODEL PT501 MODELO PT501 MODÈLE PT501 To learn more about Porter-Cable visit our website at: http://www.porter-cable.com Para obtener más información sobre Porter-Cable, visite nuestro sitio web en: http://www.porter-cable.
PAGE 2
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
PAGE 3
HAZARD RISK OF LOSS OF HEARING WHAT COULD HAPPEN HOW TO PREVENT IT • Long term exposure to noise produced from the operation of air tools can lead to permanent hearing loss. • Always wear ANSI S3.19 hearing protection. HAZARD RISK TO BREATHING INHALATION HAZARD WHAT COULD HAPPEN HOW TO PREVENT IT • Abrasive tools, such as grinders, sanders, and cut-off tools generate dust and abrasive materials which can be harmful to human lungs and respiratory system.
PAGE 4
HAZARD RISK OF INJURY (continued) WHAT COULD HAPPEN HOW TO PREVENT IT • Improperly maintained tools and accessories can cause serious injury. • Maintain the tool with care. • Keep a cutting tool sharp and clean. A properly maintained tool, with sharp cutting edges reduces the risk of binding and is easier to control. • There is a risk of bursting if the tool is damaged. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation.
PAGE 5
SPECIFICATIONS Maximum Torque Blows Per Minute Free Speed RPM @ 90 PSI Maximum Working Pressure Air Inlet Recommended Hose Size Air Consumption @ 90 PSI 400 ft./lbs. 1000 7000 90 PSI 1/4” NPT 3/8” I.D. 4.2 SCFM ASSEMBLY Accessories Required IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8” I.D. and fittings should have 1/4” NPT thread.
PAGE 6
● Place tool in forward or reverse position. Push button in on “F” side for forward or “R” side for reverse. Push button all the way in on the “R” side for Reverse position. Push button all the way in on the “F” side for Forward position. ● ● ● ● Depress the trigger to operate tool. Release trigger to stop tool. Always disconnect air supply when changing sockets. When job is complete, turn the air compressor off and store as described in the air compressor operator manual.
PAGE 7
REPAIR PARTS 7 8 16 9 34 30 (2) 26 29 (2) 22 17 27 48 25 28 21 24 3 42 (6) 45 18 47 4 39 Ref No. Part No.
PAGE 8
LIMITED WARRANTY PORTER-CABLE CORPORATION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators, which have the following warranty periods: 3 YEARS - Limited warranty on 2-stage oil-free air compressor pumps that operate at 1725 RPM. 2 YEARS - Limited warranty on oil-lubricated air compressor pumps.