PWMA100 WIRELESS RECHARGEABLE PORTABLE AMPLIFIER WWW.PYLEAUDIO.
PARTS DESCRIPTION FEATURES * * * * * * * * * * * * Built-in 12V 1.2A Rechargeable Battery Built-in One Channel VHF Wireless Receiver With One Handheld MIC With One Wired MIC Input Jack Separate Wired MIC and Wireless MIC Volume Controls With REC out Jack With Treble, Bass and Echo Controls With Power, RF and Charge LED Indicators Power Supply: AC 120V/60HZ, DC12~15V Power output: 20W Frequency Range: 160~270MHz Operating Range: Up to 100ft. 1. Power switch 9. Bass control 2.
OPERATION OPERATION Recharging: 1. POWER SUPPLY a. AC power: Please confirm your current AC power is same as the voltage marked on the device. b.DC power: DC power can be input from DC IN jack. If you use car battery, the power should be 12V-15V. Please note the correct polarity. C. Built-in rechargeable battery: you can also use built-in rechargeable battery. 1. Connect amplifier to AC power, charge indicator will light. The unit starts to charge rechargeable battery.
SPECIFICATIONS TROUBESHOOTING PROBLEM SOLUTION AMPLIFIER 1.Push the power switch to "ON" RF indicator does not light 2.Replace a new battery for transmitter. Output power: 20W(MAX) 3.Please check the frequency of transmitter. Frequency Range: 160-270MHz S/N: 60dB Power supply: AC 120V 60Hz Make sure transmitter frequency is same as main unit. 1.Rechargeable battery power is low. Please RF indicator plug in AC power to charge the battery. flashes 2.Transmitter battery power is low.