- Pyle Pro Trickster Scratch 2 Channel Mixer Owner's Manual PYD-710, PYD-720

ManualsBrandsPYLE Audio ManualsMusical InstrumentPYD-710

10 – Pyle Pro Mixer Owner’s Manual

PYLE PRO MIXERS

warranty registration card

Thank you for purchasing this PYLE

product. To activate your

warranty, please mail this card

within 10 days.

Name

Address

City, State ZIP

Model No. Serial #

(if available)

Date of Purchase

Purchased at:

Music Products Store

Catalog Merchandiser

Sound Contractor/Installer Mail Order

Other

Please complete warranty card, detach and return

trickster

scratch

2 Channel

Mixer

PYD-710/PYD-720

Summary of content (6 pages)

PAGE 1
trickster (if available) PYLE PRO MIXERS Serial # Sound Contractor/Installer Other Mail Order warranty registration card Please complete warranty card, detach and return Thank you for purchasing this PYLE product. To activate your within 10 days. warranty, please mail this card Name Address City, State ZIP Model No.
PAGE 2
Your PYLE PRO Series Performance Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.
PAGE 3
Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit.
PAGE 4
Using Headphones Plug a pair of stereo headphones (not supplied) with a 1/4” jack into the Phones input. Using headphones not only affords you the opportunity to listen privately, but also enables you to monitor the incoming audio sources so you can locate an exact passage or section before mixing it in. It also gives you the opportunity to set up the relative volume level of the upcoming passage before it joins the mix. 3.
PAGE 5
Using the Crossfader Mixing the Inputs, cont. When the crossfade slider is in the center position, the two assigned channels play equally. Sliding the control towards the A position will increase the level of A and fade out B proportionally to the distance from center. Likewise, sliding the control towards the B position will increase the level of B and fade out A. 4. Set the Channel A and Channel B volume control sliders to approximately 8-10. 5.
PAGE 6
Using the “Punch” Controls (PYD-720) Specifications PYD710/720 Input Sensitivity/Impedance Mic Phono 1-2 Line 1-4 The effect you get depends upon the position of the Crossfader. Output Level Main Out Record Similarly, with the Crossfader at 100% Channel B (all the way to the right), pressing the Channel B Punch Button will mute the Channel B material.