PYD6070/PYD1270 pro series 6/12 channel 2 Bus professional mixing console
Your PYLE PRO Series Compact Mixing Console is a sophisticated control center, perfect for mixing sound from multiple signal sources such as MICROPHONES, GUITAR, GUITAR AMP,KEYBOARD, SAMPLER, DRUM MACHINE or AUDIO OUTPUT FROM A VCR. This mixer is ruggedly constructed for home or professional use. Wide range of volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.
Safety Instructions CAUTION: To reduce the risk of electronic shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire electric shock, do not expose this device to rain and moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure-voltage that may be sufficient to constitute a risk of shock.
Features and Controls: PYD6070 Mixer MIC1 & MIC2 Balanced XLR Input Connector For connecting a balanced low impedance microphone with XLR type plug. EFX SEND/RETURN Jacks Permit you to either include externally generated effects (such as a digital sampler or synth) IN the mix, or to process the mixed sound (echo reverb, etc.). HEADPHONES Jack Accepts the headphones with 1/4" plug.
Features and Controls: PYD1270 Mixer EFX SEND/RETURN (LINE 11/12 Input) Jacks Permit you to either include externally generated effects (such as a digital sampler or synth) IN the mix, or to process the mixed sound (echo reverb, etc.). Use two 1/4" (TRS) jacks of LINE 11/12 as effect return path, turn the EFX GAIN of CH 11/12 fully down to avoid undesirable feedback. LINE 1, LINE 2, LINE 3, & LINE 4 BAL or UNBAL 1/4" (TRS) Input Jack For connecting a balanced or unbalanced line level sources.
INSTALLATION, PYD6070 Mixers 4 – Pyle Pro Mixer PYD6070/1270 Owner’s Manual
INSTALLATION, PYD1270 Mixers Pyle Pro Mixer PYD6070/1270 Owner’s Manual – 5
Mono Input Channel Controls CH1/CH2 For PYD6070 CH1/CH2/CH3/CH4 For PYD1270 MIC EQ (HI/MID/LO) Each mono input channel comes with an XLR balanced microphone input connector and also offers a +48V PHANTOM switch to supply power for condenser microphones. Please mute the playback/PA loudspeakers system before switching on +48V PHANTOM power to prevent the switchon thumps being directed to the loudspeakers.
Stereo Input Channel Controls CH5/6, CH7/8, CH9/10 & CH11/12 For PYD1270 CH3/4 & CH5/6 For PYD6070 LINE, LEFT & RIGHT BAL Each stereo input channel comes with two balanced 1/4" (TRS) line level input jacks. The unbalanced devices can also be connected to this input. If only the jack marked "LEFT" is used, the channel operate in mono. The stereo channels are designed to handle typical line level signals.
Main Section Connections and Controls PYD6070 PYD1270 EFX SEND Jack It is a 1/4" unbalanced jack sends out the signals from mix bus to the external effects unit. EFX RETURN Jacks/Control (PYD6070) The EFX RETURN Jacks bring the output of the external effects unit back into the mixer.
TAPE IN Jacks The TAPE IN jacks are used to bring the external signal source (Tape Recorder or CD Player) into the mixer. Like the EFX RETURN jacks, they also can be used as a standard stereo line level input, in other words, the line or tape output of an power amplifier with source selection switch can also be connected here for you to listen to additional source. TAPE OUT Jacks The TAPE OUT jacks are used send the MAIN mix signal to your recording device.
Specifications MONO INPUT CHANNELS Mic Input electronically balanced Sensitivity/Impedance ..............................................1.5 mV/600 Ohms Frequency Response .................................................20 Hz to 20 kHz, +/- 3dB Distortion ................................................................0.2%, 1 kHz/1.5 mV input S/N Ratio ................................................................60 dB (with A-WTD) Line Input electronically balanced Frequency Response. ..................
Please complete warranty card, detach and return Place Stamp Here PYLE PRO Audio, Inc.
Limited Warranty All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the mixer. Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.