5KH equalizer with subwoofer crossover 4KHz 6KHz m a n u a l power o w n e r ’s ple730r ple520p
congratulations . . . for choosing Pyle Audio, and congratulations on joining a select group of dedicated enthusiasts committed to the very best in mobile sound performance and dependability. You are now the proud owner of one of the world’s most sophisticated electronics components. This Pyle product is the result of an extensive engineering program with the sole purpose of creating the finest mobile audio experience imaginable.
owner’s manual table of contents Ple520p i congratulations 1 table of contents 2 general features 3 specifications features and controls 4-5 Ple730r 6-7 Ple520p 8 mounting and installation 9 electrical connections 10-11 system wiring 12 precautions and troubleshooting 1
general features ple730r ple520p 7 band graphic equalizer pre-amp input via RCA jacks output level control LED power level meter 12 dB boost/cut subwoofer frequency control night illumination subwoofer boost control remote power on/off front and rear fader control high impedance output 6 channels RCA outputs ple730r ple520p half-DIN size cabinet 5 band graphic equalizer 5 band parametric controls 20 frequency band selectors pre-amp line & aux input via RCA jacks output volume control input gain adj
owner’s manual specifications ple730r ple520p ple730r ple520p cks 7-Band Equalizer center frequencies 65 Hz · 150 Hz 400 Hz · 1.4 KHz 2.4 KHz · 6 KHz 15 KHz 25 · 50 · 65 · 80 Hz low band 150 · 200 · 260 · 300 Hz low mid band ntrol 600 · 800 · 1000 · 1200 Hz high mid band 2.1 · 2.8 · 3.5 · 4.2 KHz high band rol p 5-Band Equalizer sub band 7 · 9.5 · 12 · 15 KHz frequency response input level 400 mV 15 Hz - 30 KHz (+/– 1 dB) 200 mV (for 400mV output) total harmonic distortion (THD) < 0.
features and controls ple730r LED level display aux input switch fader/volume control power indicator LED front power left output level right output level aux front fader rear def s 65Hz 150Hz 400Hz 1.4KHz 2.
owner’s manual features aux input switch the switch selects the aux or line inputs. LED level display these rows of LEDs display the Preamp Output Levels. Left and right channels are displayed independently at peak levels. power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on.
features and controls ple520p input gain adjustment aux line equalizer center frequency switches top 25 50 65 80 600 800 1000 1200 2.1k 2.8k 3.5k 4.2k LED level display aux input switch 7k 9.
owner’s manual features input gain adjustments allows you to adjust the left and right channel input sensitivity to match the output level from your line or auxiliary source. equalizer frequency controls these switches determine the frequencies the equalizer control knobs on the front panel will affect. Setting a switch on one of the 5 bands on top of the equalizer permits the corresponding control on the front panel to boost or cut the level. aux input switch the switch selects the aux or line inputs.
mounting and installation ple730r ple520p 4 x 6 mm machine screw (4) dashboard mounting Please take the time to install your new Pyle Signal Processor securely, according to this diagram, using the hardware provided. Signal Processor enclosure This Half-DIN size unit can also be installed in the dash adjacent to the head unit, provided that there is a slot available.
owner’s manual electrical connections ple730r ple520p rear OUTPUT rear sub L R L INPUT front R L line R L aux R L R RED WIRE ORANGE WIRE Fuse 1A Fuse 0.
system wiring ple730r basic system application using front, rear, and subwoofer amps ple520p left and right line outputs from head unit left and right line inputs OUTPUT rear sub L R L INPUT front R L line R L aux R L R + – + FRONT CHANNEL power amplifier – L FRONT CHANNEL speakers R + – + REAR CHANNEL power amplifier – L REAR CHANNEL speakers R + L – + 10 SUB CHANNEL power amplifier SUB CHANNEL speakers R –
owner’s manual system wiring basic system application using a 4 channel amp and subwoofer amp ple730r ple520p left and right line outputs from head unit left and right line inputs OUTPUT rear sub L R L INPUT front R L line R L aux R L R + + – + 4 CHANNEL power amplifier – – L/R FRONT speakers L/R REAR speakers + – + L – + SUB CHANNEL power amplifier SUB CHANNEL speakers R – 11
precautions ple730r ple520p • Never drive with the volume raised so high you cannot hear what is occuring in traffic around you. • Be aware that repeated exposure to excessive volume levels can permanently damage your hearing! • Keep all electronics away from moisture, dust, extreme heat or extreme vibrations. • Pyle Audio products are capable of sound pressure levels in excess of 150 dB. Continuous exposure to sound pressure levels over 100 dB may cause permanent loss of hearing.
owner’s manual notes 13
limited warranty policy All Pyle products are carefully constructed and thoroughly tested before shipment. Products purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser. Should the product fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of Pyle.