P Z R 3 0 0 0 A m p l i f i e r
Your New Pyle Pro PZR series P.A. Amplifier gives you the power and versatility you need in a professional sound system. The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material. It can be used for live bands, office paging systems, public announcements, or a variety of other installations.
n - REAR PANEL, PZR3000 Stereo/Mono Switch Lets you select conventional stereo operation with a stereo input signal or bridged mono input mode. Fan Cooling Cooling system is automatically activated whenever amplifier is turned on. This forced air cooling system rapidly exhausts interior heat, reducing operating temperature and aiding performance. Input Jacks Let you connect a variety of audio input sources via the balanced (XLR/6.35mm phone jack combinations) or unbalanced (RCA) inputs.
INSTALLATION GUIDELINES Connecting the GND (Ground) screw terminal Connecting a mixer or preamplifier may cause excessive noise or hum in the amplifier output. To prevent this, connect one end of a low-capacitance shielded wire to the amplifier’s ground screw (on the rear panel). Then connect the other end of this wire to the ground terminal on the mixer or preamplifier enclosure.
d MONO OPERATION Connecting to standard AC power After making all other connections, set the POWER switch to OFF position. Then connect the power cord to a standard AC outlet. SWITCH IN “MONO” POSITION CH 2 Mounting the amplifier This amplifier is designed to accept standard rack mounting installations. Two slots on each end of the front panel make it suitable for such an installation.
Caring for your Pyle Pro Amplifier Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use: • Keep the amplifier dry. If it gets wet, wipe immediately. • Use the amplifier only in well-ventilated installations. • Handle the amplifier gently and carefully - do not drop! • Keep the amplifier away from dust and dirt. • Wipe occasionally with a damp cloth to keep it looking new.
PYLE PRO PZR3000 Amplifier Owner’s Manual - 5 PYLE PRO Audio, Inc.
www.pyleaudio.
